On Fri, 2005-01-07 at 11:48 +0200, Olav Kongas wrote:
> On Thu, 6 Jan 2005, Ian Campbell wrote:
>
> > static struct isp116x_platform_data isp116x_platform_data = {
> > // Enable internal resistors on downstream ports
> > .sel15Kres = 1,
> > // Clock cannot be stopped
> > .clknotstop = 0,
> ...
>
> Ian, looking at your isp116x_platform_data I realized that I
> should have provided the platform interface the opposite
> way: not as much as will be possibly supported in the
> future, but only as little as is supported now. It is easy
> to extend it later if more is supported. Therefore, expect
> the struct isp116x_platform_data to be shrunk in future
> versions. Sorry for the inconvenience, I am still learning
> simple things.
That's fine by me. Feel free to muck about with it till you get
something you are happy with, I'll just cope...
Ian.
--
Ian Campbell, Senior Design Engineer
Web: http://www.arcom.com
Arcom, Clifton Road, Direct: +44 (0)1223 403 465
Cambridge CB1 7EA, United Kingdom Phone: +44 (0)1223 411 200
_____________________________________________________________________
The message in this transmission is sent in confidence for the attention of the
addressee only and should not be disclosed to any other party. Unauthorised
recipients are requested to preserve this confidentiality. Please advise the
sender if the addressee is not resident at the receiving end. Email to and
from Arcom is automatically monitored for operational and lawful business
reasons.
This message has been virus scanned by MessageLabs.
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
