On Wed, 2005-02-09 at 07:33, Greg KH wrote: > On Tue, Feb 08, 2005 at 02:05:04PM +0000, Steve Hosgood wrote: > > > > Briefly: > > I've written a driver for a USB camera which sends 1600x1200 or 800x600 > > images across a USB 2.0 bulk pipe. It works fine in 1600x1200 mode, but > > if switched to 800x600 mode it only gets a couple of frames before it > > wedges. > > Do you have a pointer to your driver's source so we can look at it? >
Certainly. Please grab ftp://tallyho.bc.nu/pub/steve/ov2610-ecx.tar.gz It's a driver for the Omnivision "2610-ECX" 2 megapixel USB camera development kit. The driver itself is based on the OV51x drivers from Mark McClelland (and others) at http://alpha.dyndns.org/ov511/ I was in regular contact with Mark until last October or thereabouts. He was sent a copy of this code at about that time, though the version mentioned above has been slightly tidied up since then to make it compile on 2.6.10 The URB handling of my driver is pretty much inherited from the original OV51x driver, BTW. > thanks, > > greg k-h Sadly, I don't have an actual camera that I can send you. Thank you for any info. Steve ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ [email protected] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
