Your device violates the specification by not using the correct CSW Signature.
Patches to adjust for this are already being merged. Matt On Wed, Feb 16, 2005 at 03:14:19AM +0200, Micha Feigin wrote: > I am trying to get a usb digital camera that is supposed to work through usb > storage. It works fine under win XP with the standard usb-storage driver. > > I compiled the kernel with debug messages and got the following output in > response to connecting the camera. The errors I can see are a few > > usb-storage: Bulk logical error > usb-storage: -- transport indicates error, resetting > > then > > usb-storage: Bulk logical error > usb-storage: -- transport indicates error, resetting > > and then several > > usb-storage: Bad target number ([1234567]:0) > > Any ideas if it is possible to get this thing working ? > > Thanks > > usb 1-2: new full speed USB device using uhci_hcd and address 2 > SCSI subsystem initialized > Initializing USB Mass Storage driver... > usb-storage: USB Mass Storage device detected > usb-storage: -- associate_dev > usb-storage: Vendor: 0x0762, Product: 0x7941, Revision: 0x0000 > usb-storage: Interface Subclass: 0x06, Protocol: 0x50 > usb-storage: Vendor: Unknown, Product: Unknown > usb-storage: Transport: Bulk > usb-storage: Protocol: Transparent SCSI > usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00 len=1 > usb-storage: GetMaxLUN command result is 1, data is 1 > scsi0 : SCSI emulation for USB Mass Storage devices > usbcore: registered new driver usb-storage > USB Mass Storage support registered. > usb-storage: *** thread sleeping. > usb-storage: device found at 2 > usb-storage: waiting for device to settle before scanning > usb-storage: queuecommand called > usb-storage: *** thread awakened. > usb-storage: Command INQUIRY (6 bytes) > usb-storage: 12 00 00 00 24 00 > usb-storage: Bulk Command S 0x43425355 T 0x1 L 36 F 128 Trg 0 LUN 0 CL 6 > usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes > usb-storage: Status code 0; transferred 31/31 > usb-storage: -- transfer complete > usb-storage: Bulk command transfer result=0 > usb-storage: usb_stor_bulk_transfer_buf: xfer 36 bytes > usb-storage: Status code 0; transferred 36/36 > usb-storage: -- transfer complete > usb-storage: Bulk data transfer result 0x0 > usb-storage: Attempting to get CSW... > usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes > usb-storage: Status code 0; transferred 13/13 > usb-storage: -- transfer complete > usb-storage: Bulk status result = 0 > usb-storage: Bulk Status S 0x53425300 T 0x1 R 0 Stat 0x0 > usb-storage: Bulk logical error > usb-storage: -- transport indicates error, resetting > usb-storage: usb_stor_Bulk_reset called > usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0 > usb-storage: command_abort called > usb-storage: Soft reset: clearing bulk-in endpoint halt > usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=81 len=0 > usb-storage: usb_stor_clear_halt: result = 0 > usb-storage: Soft reset: clearing bulk-out endpoint halt > usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=01 len=0 > usb-storage: usb_stor_clear_halt: result = 0 > usb-storage: Soft reset done > usb-storage: scsi cmd done, result=0x70000 > usb-storage: *** thread sleeping. > usb-storage: queuecommand called > usb-storage: *** thread awakened. > usb-storage: Command TEST_UNIT_READY (6 bytes) > usb-storage: 00 00 00 00 00 00 > usb-storage: Bulk Command S 0x43425355 T 0x1 L 0 F 0 Trg 0 LUN 0 CL 6 > usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes > usb-storage: Status code 0; transferred 31/31 > usb-storage: -- transfer complete > usb-storage: Bulk command transfer result=0 > usb-storage: Attempting to get CSW... > usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes > usb-storage: Status code 0; transferred 13/13 > usb-storage: -- transfer complete > usb-storage: Bulk status result = 0 > usb-storage: Bulk Status S 0x53425300 T 0x1 R 0 Stat 0x0 > usb-storage: Bulk logical error > usb-storage: -- transport indicates error, resetting > usb-storage: usb_stor_Bulk_reset called > usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0 > usb-storage: Soft reset: clearing bulk-in endpoint halt > usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=81 len=0 > usb-storage: usb_stor_clear_halt: result = 0 > usb-storage: Soft reset: clearing bulk-out endpoint halt > usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=01 len=0 > usb-storage: usb_stor_clear_halt: result = 0 > usb-storage: Soft reset done > usb-storage: scsi cmd done, result=0x70000 > usb-storage: *** thread sleeping. > usb-storage: device_reset called > usb-storage: usb_stor_Bulk_reset called > usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0 > usb-storage: Soft reset: clearing bulk-in endpoint halt > usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=81 len=0 > usb-storage: usb_stor_clear_halt: result = 0 > usb-storage: Soft reset: clearing bulk-out endpoint halt > usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=01 len=0 > usb-storage: usb_stor_clear_halt: result = 0 > usb-storage: Soft reset done > usb-storage: queuecommand called > usb-storage: *** thread awakened. > usb-storage: Command TEST_UNIT_READY (6 bytes) > usb-storage: 00 00 00 00 00 00 > usb-storage: Bulk Command S 0x43425355 T 0x1 L 0 F 0 Trg 0 LUN 0 CL 6 > usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes > usb-storage: Status code 0; transferred 31/31 > usb-storage: -- transfer complete > usb-storage: Bulk command transfer result=0 > usb-storage: Attempting to get CSW... > usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes > usb-storage: Status code 0; transferred 13/13 > usb-storage: -- transfer complete > usb-storage: Bulk status result = 0 > usb-storage: Bulk Status S 0x53425300 T 0x1 R 0 Stat 0x0 > usb-storage: Bulk logical error > usb-storage: -- transport indicates error, resetting > usb-storage: usb_stor_Bulk_reset called > usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0 > usb-storage: Soft reset: clearing bulk-in endpoint halt > usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=81 len=0 > usb-storage: usb_stor_clear_halt: result = 0 > usb-storage: Soft reset: clearing bulk-out endpoint halt > usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=01 len=0 > usb-storage: usb_stor_clear_halt: result = 0 > usb-storage: Soft reset done > usb-storage: scsi cmd done, result=0x70000 > usb-storage: *** thread sleeping. > usb-storage: bus_reset called > usb 1-2: reset full speed USB device using uhci_hcd and address 2 > usb-storage: usb_reset_device returns 0 > usb-storage: queuecommand called > usb-storage: *** thread awakened. > usb-storage: Command TEST_UNIT_READY (6 bytes) > usb-storage: 00 00 00 00 00 00 > usb-storage: Bulk Command S 0x43425355 T 0x1 L 0 F 0 Trg 0 LUN 0 CL 6 > usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes > usb-storage: Status code 0; transferred 31/31 > usb-storage: -- transfer complete > usb-storage: Bulk command transfer result=0 > usb-storage: Attempting to get CSW... > usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes > usb-storage: Status code 0; transferred 13/13 > usb-storage: -- transfer complete > usb-storage: Bulk status result = 0 > usb-storage: Bulk Status S 0x53425300 T 0x1 R 0 Stat 0x0 > usb-storage: Bulk logical error > usb-storage: -- transport indicates error, resetting > usb-storage: usb_stor_Bulk_reset called > usb-storage: usb_stor_control_msg: rq=ff rqtype=21 value=0000 index=00 len=0 > usb-storage: Soft reset: clearing bulk-in endpoint halt > usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=81 len=0 > usb-storage: usb_stor_clear_halt: result = 0 > usb-storage: Soft reset: clearing bulk-out endpoint halt > usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000 index=01 len=0 > usb-storage: usb_stor_clear_halt: result = 0 > usb-storage: Soft reset done > usb-storage: scsi cmd done, result=0x70000 > usb-storage: *** thread sleeping. > scsi: Device offlined - not ready after error recovery: host 0 channel 0 id 0 > lun 0 usb-storage: queuecommand called > usb-storage: *** thread awakened. > usb-storage: Bad target number (1:0) > usb-storage: scsi cmd done, result=0x40000 > usb-storage: *** thread sleeping. > usb-storage: queuecommand called > usb-storage: *** thread awakened. > usb-storage: Bad target number (2:0) > usb-storage: scsi cmd done, result=0x40000 > usb-storage: *** thread sleeping. > usb-storage: queuecommand called > usb-storage: *** thread awakened. > usb-storage: Bad target number (3:0) > usb-storage: scsi cmd done, result=0x40000 > usb-storage: *** thread sleeping. > usb-storage: queuecommand called > usb-storage: *** thread awakened. > usb-storage: Bad target number (4:0) > usb-storage: scsi cmd done, result=0x40000 > usb-storage: *** thread sleeping. > usb-storage: queuecommand called > usb-storage: *** thread awakened. > usb-storage: Bad target number (5:0) > usb-storage: scsi cmd done, result=0x40000 > usb-storage: *** thread sleeping. > usb-storage: queuecommand called > usb-storage: *** thread awakened. > usb-storage: Bad target number (6:0) > usb-storage: scsi cmd done, result=0x40000 > usb-storage: *** thread sleeping. > usb-storage: queuecommand called > usb-storage: *** thread awakened. > usb-storage: Bad target number (7:0) > usb-storage: scsi cmd done, result=0x40000 > usb-storage: *** thread sleeping. > usb-storage: device scan complete > > > ------------------------------------------------------- > SF email is sponsored by - The IT Product Guide > Read honest & candid reviews on hundreds of IT Products from real users. > Discover which products truly live up to the hype. Start reading now. > http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click > _______________________________________________ > linux-usb-devel@lists.sourceforge.net > To unsubscribe, use the last form field at: > https://lists.sourceforge.net/lists/listinfo/linux-usb-devel -- Matthew Dharm Home: [EMAIL PROTECTED] Maintainer, Linux USB Mass Storage Driver I need a computer? -- Customer User Friendly, 2/19/1998
pgp7Ru7lOGNX2.pgp
Description: PGP signature
