-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Looking more into the unusual devs code, it obvious that this is the correct way
to do this.
I will have this coded ASAP.
Nick Sillik
[EMAIL PROTECTED]
Matthew Dharm wrote:
> You're going to need to rediff this against the latest patches that
> re-organize how some of the internal data structures are allocated (which
> gives us refcounting).
>
> Also, could you use the unusual_devs.h init functions instead? Or does
> that not work out for some reason? This may also be a good time for us to
> introduce some sort of exit function along the same lines...
>
> Matt
>
> On Sat, Mar 19, 2005 at 07:27:25PM -0500, Nick Sillik wrote:
>
> Here is my final version of the patch to add usability for the onetouch button
> on Maxtor Onetouch External Drives. I have made fixes that Alan Stern, Greg
> KH,
> and others have suggested.
>
> This includes the following (partial) list of changes this list requested:
> -Locking the onetouch device list
> -Removing the wrap struct and putting it's members in the onetouch struct
> -Removing the case from usb.c and replacing it with an if
>
> Signed-off-by: Nick Sillik <[EMAIL PROTECTED]>
diff -urN -X dontdiff linux-2.6.11/drivers/usb/storage/Kconfig
linux-2.6.11mod/drivers/usb/storage/Kconfig
- --- linux-2.6.11/drivers/usb/storage/Kconfig 2005-03-02 02:38:26.000000000
-0500
+++ linux-2.6.11mod/drivers/usb/storage/Kconfig 2005-03-07 18:18:27.000000000
-0500
@@ -118,3 +118,10 @@
Say Y here to include additional code to support the Lexar Jumpshot
USB CompactFlash reader.
+config USB_STORAGE_ONETOUCH
+ bool "Support OneTouch Button on Maxtor Hard Drives (EXPERIMENTAL)"
+ depends on USB_STORAGE && INPUT_EVDEV && EXPERIMENTAL
+ help
+ Say Y here to include additional code to support the Maxtor OneTouch
+ USB hard drive's onetouch button.
+
diff -urN -X dontdiff linux-2.6.11/drivers/usb/storage/Makefile
linux-2.6.11mod/drivers/usb/storage/Makefile
- --- linux-2.6.11/drivers/usb/storage/Makefile 2005-03-02 02:38:13.000000000
-0500
+++ linux-2.6.11mod/drivers/usb/storage/Makefile 2005-03-07
23:45:30.000000000 -0500
@@ -18,6 +18,7 @@
usb-storage-obj-$(CONFIG_USB_STORAGE_ISD200) += isd200.o
usb-storage-obj-$(CONFIG_USB_STORAGE_DATAFAB) += datafab.o
usb-storage-obj-$(CONFIG_USB_STORAGE_JUMPSHOT) += jumpshot.o
+usb-storage-obj-$(CONFIG_USB_STORAGE_ONETOUCH) += onetouch.o
usb-storage-objs := scsiglue.o protocol.o transport.o usb.o \
initializers.o $(usb-storage-obj-y)
diff -urN -X dontdiff linux-2.6.11/drivers/usb/storage/onetouch.c
linux-2.6.11mod/drivers/usb/storage/onetouch.c
- --- linux-2.6.11/drivers/usb/storage/onetouch.c 1969-12-31
19:00:00.000000000
-0500
+++ linux-2.6.11mod/drivers/usb/storage/onetouch.c 2005-03-11
14:23:43.000000000
- -0500
@@ -0,0 +1,253 @@
+/*
+ * Support for the Maxtor OneTouch USB hard drive's button
+ *
+ * Current development and maintenance by:
+ * Copyright (c) 2005 Nick Sillik <[EMAIL PROTECTED]>
+ *
+ * Initial work by:
+ * Copyright (c) 2003 Erik Thyr??n <[EMAIL PROTECTED]>
+ *
+ * Based on usbmouse.c (Vojtech Pavlik) and xpad.c (Marko Friedemann)
+ *
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/input.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/smp_lock.h>
+#include <linux/spinlock.h>
+#include <linux/usb.h>
+#include "onetouch.h"
+#include "debug.h"
+
+
+spinlock_t onetouch_list_lock = SPIN_LOCK_UNLOCKED;
+struct usb_onetouch {
+ char name[128];
+ char phys[64];
+ struct input_dev dev; /* input device interface */
+ struct usb_device *udev; /* usb device */
+
+ struct urb *irq; /* urb for interrupt in report */
+ unsigned char *data; /* input data */
+ dma_addr_t data_dma;
+
+ int open_count; /* reference count */
+
+ struct list_head list;
+ struct usb_onetouch *onetouch;
+};
+
+
+
+
+/*
+struct usb_onetouch_wrap {
+ struct list_head list;
+ struct usb_onetouch *onetouch;
+};
+*/
+static LIST_HEAD(onetouch_list);
+
+static void onetouch_irq(struct urb *urb, struct pt_regs *regs)
+{
+ struct usb_onetouch *onetouch = urb->context;
+ int retval;
+
+ switch (urb->status) {
+ case 0:
+ /* success */
+ break;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ /* this urb is terminated, clean up */
+ dbg("%s - urb shutting down with status: %d", __FUNCTION__,
+ urb->status);
+ return;
+ default:
+ dbg("%s - nonzero urb status received: %d", __FUNCTION__,
+ urb->status);
+ goto resubmit;
+ }
+
+ input_regs(&onetouch->dev, regs);
+ /*printk(KERN_INFO "input: %02x %02x\n", onetouch->data[0],
onetouch->data[1]); */
+ input_report_key(&onetouch->dev, ONETOUCH_BUTTON,
+ onetouch->data[0] & 0x02);
+
+ input_sync(&onetouch->dev);
+
+ resubmit:
+ retval = usb_submit_urb(urb, GFP_ATOMIC);
+ if (retval)
+ err("%s - usb_submit_urb failed with result %d",
+ __FUNCTION__, retval);
+}
+
+static int onetouch_open(struct input_dev *dev)
+{
+ struct usb_onetouch *onetouch = dev->private;
+
+ if (onetouch->open_count++)
+ return 0;
+
+ onetouch->irq->dev = onetouch->udev;
+ if (usb_submit_urb(onetouch->irq, GFP_KERNEL)) {
+ onetouch->open_count--;
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static void onetouch_close(struct input_dev *dev)
+{
+ struct usb_onetouch *onetouch = dev->private;
+
+ if (!--onetouch->open_count)
+ usb_kill_urb(onetouch->irq);
+}
+
+int onetouch_connect_input(struct us_data *ss)
+{
+ struct usb_device *udev = ss->pusb_dev;
+ struct usb_onetouch *onetouch;
+ char path[64];
+
+ if (udev->descriptor.idVendor != VENDOR_MAXTOR
+ || udev->descriptor.idProduct != PRODUCT_ONETOUCH) {
+ return 0; /* Not a onetouch device, nothing to see here */
+ }
+
+
+
+ US_DEBUGP("Connecting OneTouch device\n");
+
+ onetouch = kmalloc(sizeof(struct usb_onetouch), GFP_KERNEL);
+
+ if ((onetouch) == NULL) {
+ err("cannot allocate memory for new onetouch");
+ return -1;
+ }
+ memset(onetouch, 0, sizeof(struct usb_onetouch));
+
+ onetouch->data = usb_buffer_alloc(udev, ONETOUCH_PKT_LEN,
+ SLAB_ATOMIC,
+ &onetouch->data_dma);
+ if (!onetouch->data) {
+ kfree(onetouch);
+ return -8;
+ }
+
+ onetouch->irq = usb_alloc_urb(0, GFP_KERNEL);
+ if (!onetouch->irq) {
+ err("cannot allocate memory for new onetouch interrupt urb");
+ usb_buffer_free(udev, ONETOUCH_PKT_LEN, onetouch->data,
+ onetouch->data_dma);
+ kfree(onetouch);
+ return -6;
+ }
+
+ usb_fill_int_urb(onetouch->irq, udev,
+ ss->recv_intr_pipe,
+ onetouch->data, ONETOUCH_PKT_LEN, onetouch_irq,
+ onetouch, ss->ep_bInterval);
+ onetouch->irq->transfer_dma = onetouch->data_dma;
+ onetouch->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ onetouch->udev = udev;
+
+ onetouch->dev.id.bustype = BUS_USB;
+ onetouch->dev.id.vendor = udev->descriptor.idVendor;
+ onetouch->dev.id.product = udev->descriptor.idProduct;
+ onetouch->dev.id.version = udev->descriptor.bcdDevice;
+ onetouch->dev.private = onetouch;
+ onetouch->dev.name = onetouch->name;
+ onetouch->dev.phys = onetouch->phys;
+ onetouch->dev.open = onetouch_open;
+ onetouch->dev.close = onetouch_close;
+
+ usb_make_path(udev, path, 64);
+ snprintf(onetouch->phys, 64, "%s/input0", path);
+ snprintf(onetouch->name, 128, "%s %s", ss->vendor, ss->product);
+ if (!strlen(onetouch->name))
+ snprintf(onetouch->name, 128, "Maxtor OneTouch");
+
+ set_bit(EV_KEY, onetouch->dev.evbit);
+ set_bit(ONETOUCH_BUTTON, onetouch->dev.keybit);
+ clear_bit(0, onetouch->dev.keybit);
+
+ input_register_device(&onetouch->dev);
+
+ printk(KERN_INFO "input: %s on %s\n", onetouch->dev.name, path);
+
+ spin_lock(&onetouch_list_lock);
+ list_add(&onetouch->list, &onetouch_list);
+ spin_unlock(&onetouch_list_lock);
+
+
+ return 0;
+}
+
+int onetouch_release_input(struct us_data *ss)
+{
+ struct usb_device *udev = ss->pusb_dev;
+ struct usb_onetouch *onetouch;
+ struct usb_onetouch *entry;
+
+ if (udev->descriptor.idVendor != VENDOR_MAXTOR ||
+ udev->descriptor.idProduct != PRODUCT_ONETOUCH) {
+ return 0; /* Not a onetouch device, nothing to see here */
+ }
+
+ US_DEBUGP("Trying to release OneTouch device...");
+
+ onetouch = NULL;
+ spin_lock(&onetouch_list_lock);
+ list_for_each_entry(entry, &onetouch_list, list) {
+ if (entry->udev == udev) {
+ onetouch = entry;
+ list_del(&onetouch->list);
+ break;
+ }
+ }
+ spin_unlock(&onetouch_list_lock);
+
+ if (onetouch) {
+ US_DEBUGP("device found: %s. Releasing\n",
+ onetouch->phys);
+ usb_unlink_urb(onetouch->irq);
+ input_unregister_device(&onetouch->dev);
+ usb_free_urb(onetouch->irq);
+ usb_buffer_free(onetouch->udev, ONETOUCH_PKT_LEN,
+ onetouch->data, onetouch->data_dma);
+ kfree(onetouch);
+ }
+
+
+ return 0; /* Should not return anything else (yet)
*/
+ /* FIXME: In the future this should return something like EBUSY */
+ /* If the things being freed here are being used currently */
+}
diff -urN -X dontdiff linux-2.6.11/drivers/usb/storage/onetouch.h
linux-2.6.11mod/drivers/usb/storage/onetouch.h
- --- linux-2.6.11/drivers/usb/storage/onetouch.h 1969-12-31
19:00:00.000000000
-0500
+++ linux-2.6.11mod/drivers/usb/storage/onetouch.h 2005-03-11
14:00:01.000000000
- -0500
@@ -0,0 +1,16 @@
+#ifndef _ONETOUCH_H_
+#define _ONETOUCH_H_
+
+#include <linux/config.h>
+#include <linux/input.h>
+#include "usb.h"
+
+#define ONETOUCH_PKT_LEN 0x02
+#define ONETOUCH_BUTTON KEY_PROG1
+#define VENDOR_MAXTOR 0x0d49
+#define PRODUCT_ONETOUCH 0x7010
+
+int onetouch_connect_input(struct us_data *ss);
+int onetouch_release_input(struct us_data *ss);
+
+#endif
diff -urN -X dontdiff linux-2.6.11/drivers/usb/storage/usb.c
linux-2.6.11mod/drivers/usb/storage/usb.c
- --- linux-2.6.11/drivers/usb/storage/usb.c 2005-03-02 02:37:50.000000000
-0500
+++ linux-2.6.11mod/drivers/usb/storage/usb.c 2005-03-11 18:22:11.000000000
-0500
@@ -87,7 +87,13 @@
#ifdef CONFIG_USB_STORAGE_JUMPSHOT
#include "jumpshot.h"
#endif
- -
+#ifdef CONFIG_USB_STORAGE_ONETOUCH
+#include "onetouch.h"
+#endif
+#ifndef CONFIG_USB_STORAGE_ONETOUCH
+static inline int onetouch_connect_input (struct us_data *ss) { return 0; }
+static inline int onetouch_release_input (struct us_data *ss) { return 0; }
+#endif
#include <linux/module.h>
#include <linux/init.h>
@@ -799,6 +805,14 @@
/* Set the hostdata to prepare for scanning */
us->host->hostdata[0] = (unsigned long) us;
+ /* Attempt to connect the onetouch urb to the device */
+ /* Note: If the CONFIG_USB_STORAGE_ONETOUCH is not set */
+ /* onetouch_connect_input(us) will always return 0 */
+ if (onetouch_connect_input(us) != 0) {
+ printk(KERN_WARNING USB_STORAGE
+ "Unable to allocate onetouch urb\n");
+ }
+
/* Start up our control thread */
p = kernel_thread(usb_stor_control_thread, us, CLONE_VM);
if (p < 0) {
@@ -819,6 +833,14 @@
{
US_DEBUGP("-- %s\n", __FUNCTION__);
+ /* Attempt to connect the onetouch urb to the device */
+ /* Note: If the CONFIG_USB_STORAGE_ONETOUCH is not set */
+ /* onetouch_connect_input(us) will always return 0 */
+ if (onetouch_realese_input(us) != 0) {
+ printk(KERN_WARNING USB_STORAGE
+ "Unable to allocate onetouch urb\n");
+ }
+
/* Kill the control thread. The SCSI host must already have been
* removed so it won't try to queue any more commands.
*/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.5 (GNU/Linux)
iD8DBQFCPSPo2hKwjhIv2aMRAr6FAJ4uwrbXOQyV85rz8TFvLrPDFVQK8QCffauo
cQgaKqQwHSSJgm1X9X1ynvM=
=yeZJ
-----END PGP SIGNATURE-----
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
linux-usb-devel@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
