Greg KH wrote: > On Thu, Mar 24, 2005 at 08:00:46AM -0500, Wakko Warner wrote: > > I have a system that I just updated to 2.6 and USB fails to work after some > > time (~6-8 hours) giving me the "irq 11:nobody cared" message. > > > > This system is a supermicro p3tdde (via chipset) > > I have ACPI and Preempt enabled (which I will disable and try again) > > > > I notice this rather quickly as my keyboard/mouse are on this controller. I > > have an NEC chip USB2.0 card installed which is currently working. > > Can you try 2.6.11 and see if that is better?
I went to 2.6.12-rc2 instead. So far it seems to be working. I was unable to test this until yesterday due to my workload. The only problem I have now is the fact that my keyboard has 8 extra keys which only 3 work under 2.6; all 8 keys work fine under 2.4. I ran showkey -s to verify. I see no log messages with 2.6.12-rc2 (I did with 2.6.10) They keyboard is an HP wireless KBR0133. It came as a set with wireless receiver/mouse/keyboard. -- Lab tests show that use of micro$oft causes cancer in lab animals ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
