Am Montag 25 April 2005 21:04 schrieb Alan Stern: > > Ok. Let me know when you need a tester after 2.6.10. > > Stefan, > > I haven't forgotten your offer!
you must have either a good memory or a good email backlog ;-) > http://www.kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/usb-2.6.12- >rc3.patch > > which will apply to 2.6.12-rc3 (obviously). Would you like to try it out > and let me know how it behaves? I've tested with full speed and low speed devices, connected directly or to a self powered USB 1.1 hub. On resume I get a check_and_reset_hc: legsup = 0x2000 Performing full reset for all three UHCI host controllers. Afterwards, EHCI restarts, hands over ports, the devices are (re)detected by UHCI and work fine. As far as I remember our conversation, that is what I need to expect due to the BIOS completely powering down the USB subsystem. The fact that devices vanish for a short time may irritate upper layers like USB storage, but OTOH I can even connect and disconnect stuff during S3 successfully now. Nice work! Stefan ------------------------------------------------------- This SF.Net email is sponsored by: NEC IT Guy Games. Get your fingers limbered up and give it your best shot. 4 great events, 4 opportunities to win big! Highest score wins.NEC IT Guy Games. Play to win an NEC 61 plasma display. Visit http://www.necitguy.com/?r=20 _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
