Hi List, I am tring to communicate with my Bluetooth USB dongle (BT5000U from silicom Wave) through Linux USB Bluetooth TTY driver. I am using 2.4.19-rmk7-ds3 arm Kernel. I have USB support. Atpresent my kernel dont have any Bluetooth stack (Bluez or Open BBT). I didnt add HID support (Keyboard/vedio support ) also. I have connected my USB dongle in PCI-USB converter card. USB Dongle seems to be identified by the kernel. I tried to write some data { 0x01,0x09,0x10,00} . through C program.. i got the following messages on dmesg. I have pasted the complete dmesg.
I wasnt able to read any thing from it.. I m very newbie to USB and bluetooth.. please provide me some inputs. # dmesg K code, 415K data, 68K init) Dentry cache hash table entries: 2048 (order: 2, 16384 bytes) Inode cache hash table entries: 1024 (order: 1, 8192 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 4096 (order: 2, 16384 bytes) POSIX conformance testing by UNIFIX FIFO_CFG: 0000 FIFO_PRIO: 0000 PCI: bus0: Fast back to back transfers enabled PCI: bus1: Fast back to back transfers enabled isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Memory clock = 20.000 MHz Module id: 0 Starting kswapd VFS: Diskquotas version dquot_6.4.0 initialized Coda Kernel/Venus communications, v5.3.18, [EMAIL PROTECTED] JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB. ttyAM0 at MEM 0x16000000 (irq = 1) is a AMBA ttyAM1 at MEM 0x17000000 (irq = 2) is a AMBA kmikbd at 0xf1800000 on irq 3 (Keyboard) kmikbd: reset failed; no ack pty: 256 Unix98 ptys configured kmimouse at 0xf1900000 on irq 4 (Mouse) kmimouse: reset failed; no ack loop: loaded (max 8 devices) eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <[EMAIL PROTECTED]> and others eth0: Intel Corp. 82557/8/9 [Ethernet Pro 100], 00:D0:B7:17:20:EA, IRQ 15. Board assembly 721383-008, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0x04f4518b). raw1394: /dev/raw1394 device initialized ieee1394: Loaded AMDTP driver ieee1394: Loaded CMP driver AFS: Found 2 x16 devices at 0x800000 in 32-bit mode AFS: Found 2 x16 devices at 0x1000000 in 32-bit mode AFS: Found 2 x16 devices at 0x1800000 in 32-bit mode 0: offset=0x0,size=0x20000,blocks=64 1: offset=0x800000,size=0x20000,blocks=64 2: offset=0x1000000,size=0x20000,blocks=64 3: offset=0x1800000,size=0x20000,blocks=64 Using buffer write method mtd0: at 0x00000000, 128KB, 0, BMON Loaded Creating 1 MTD partitions on "AFS": 0x00000000-0x00020000 : "BMON Loaded" mtd: Giving out device 0 to BMON Loaded usb.c: registered new driver usbdevfs usb.c: registered new driver hub hcd/ehci-hcd.c: 2002-May-07 USB 2.0 'Enhanced' Host Controller (EHCI) Driver hcd/ehci-hcd.c: block sizes: qh 96 qtd 96 itd 128 sitd 64 usb-uhci.c: $Revision: 1.275 $ time 14:20:06 May 31 2005 usb-uhci.c: High bandwidth mode enabled usb-uhci.c: v1.275:USB Universal Host Controller Interface driver usb-ohci-pci.c: usb-00:0c.0, OPTi Inc. 82C861 usb-ohci.c: USB OHCI at membase 0xc3830000, IRQ 16 usb.c: new USB bus registered, assigned bus number 1 usb.c: kmalloc IF c0238b20, numif 1 usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1 usb.c: USB device number 1 default language ID 0x0 Product: USB OHCI Root Hub SerialNumber: c3830000 hub.c: USB hub found hub.c: 2 ports detected hub.c: standalone hub hub.c: ganged power switching hub.c: global over-current protection hub.c: Port indicators are not supported hub.c: power on to power good time: 2ms hub.c: hub controller current requirement: 0mA hub.c: port removable status: RR hub.c: local power source is good hub.c: no over-current condition exists hub.c: enabling power on all ports usb.c: hub driver claimed interface c0238b20 usb.c: kusbd: /sbin/hotplug add 1 usb.c: kusbd policy returned 0xfffffffe usb.c: registered new driver hid hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <[EMAIL PROTECTED]> hid-core.c: USB HID support drivers CDCEther.c: CDCEther.c: 0.98.6 7 Jan 2002 Brad Hards and another usb.c: registered new driver CDCEther bluetooth.c: USB Bluetooth support registered usb.c: registered new driver bluetooth bluetooth.c: USB Bluetooth tty driver v0.12 usb.c: registered new driver usbnet usb.c: registered new driver serial usbserial.c: USB Serial support registered for Generic usbserial.c: USB Serial Driver core v1.4 mice: PS/2 mouse device common for all mice NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 1024 bind 2048) IP-Config: Complete: device=eth0, addr=10.50.34.17, mask=255.255.248.0, gw=10.50.32.1, host=10.50.34.17, domain=, nis-domain=(none), bootserver=10.50.34.13, rootserver=10.50.34.13, rootpath= NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com hub.c: port 1, portstatus 100, change 0, 12 Mb/s hub.c: port 2, portstatus 101, change 1, 12 Mb/s hub.c: port 2 connection change hub.c: port 2, portstatus 101, change 1, 12 Mb/s Looking up port of RPC 100003/2 on 10.50.34.13 Looking up port of RPC 100005/1 on 10.50.34.13 VFS: Mounted root (nfs filesystem). hub.c: port 2, portstatus 101, change 0, 12 Mb/s hub.c: port 2, portstatus 101, change 0, 12 Mb/s hub.c: port 2, portstatus 101, change 0, 12 Mb/s hub.c: port 2, portstatus 101, change 0, 12 Mb/s hub.c: port 2, portstatus 103, change 10, 12 Mb/s hub.c: USB new device connect on bus1/2, assigned device number 2 usb.c: not enough configurations usb.c: unable to get device 2 configuration (error=-22) hub.c: port 2, portstatus 103, change 10, 12 Mb/s hub.c: USB new device connect on bus1/2, assigned device number 3 usb.c: kmalloc IF c027e820, numif 2 usb.c: new device strings: Mfr=1, Product=2, SerialNumber=3 usb.c: USB device number 3 default language ID 0x409 Manufacturer: SiW Product: SiW SerialNumber: 8630040D0B00 bluetooth.c: found interrupt in bluetooth.c: found bulk in bluetooth.c: found bulk out bluetooth.c: USB Bluetooth converter detected bluetooth.c: Bluetooth converter now attached to ttyUB0 (or usb/ttub/0 for devfs) usb.c: bluetooth driver claimed interface c027e820 bluetooth.c: usb_bluetooth_probe - improper number of endpoints. Bluetooth driver not bound. bluetooth.c: usb_bluetooth_probe - improper number of endpoints. Bluetooth driver not bound. bluetooth.c: usb_bluetooth_probe - improper number of endpoints. Bluetooth driver not bound. bluetooth.c: usb_bluetooth_probe - improper number of endpoints. Bluetooth driver not bound. bluetooth.c: usb_bluetooth_probe - improper number of endpoints. Bluetooth driver not bound. bluetooth.c: usb_bluetooth_probe - improper number of endpoints. Bluetooth driver not bound. usbserial.c: none matched usb.c: unhandled interfaces on device usb.c: kusbd: /sbin/hotplug add 3 usb.c: kusbd policy returned 0xfffffffe hub.c: port 1, portstatus 100, change 0, 12 Mb/s hub.c: port 2, portstatus 103, change 0, 12 Mb/s bluetooth.c: bluetooth_open bluetooth.c: bluetooth_write_room bluetooth.c: bluetooth_write_room - returns 3072 bluetooth.c: bluetooth_write - 1 byte(s) bluetooth.c: bluetooth_write - write request only included type 1 bluetooth.c: bluetooth_write_room bluetooth.c: bluetooth_write_room - returns 3072 bluetooth.c: bluetooth_write - 1 byte(s) bluetooth.c: bluetooth_write - write request only included type 9 bluetooth.c: bluetooth_write_room bluetooth.c: bluetooth_write_room - returns 3072 bluetooth.c: bluetooth_write - 2 byte(s) bluetooth.c: bluetooth_write - length = 2, data = 10 00 bluetooth.c: bluetooth_write - unsupported (at this time) write type bluetooth.c: bluetooth_write_room bluetooth.c: bluetooth_write_room - returns 3072 bluetooth.c: bluetooth_write - 2 byte(s) bluetooth.c: bluetooth_write - length = 2, data = 10 00 bluetooth.c: bluetooth_write - unsupported (at this time) write type bluetooth.c: bluetooth_close My kernel .config file # # Automatically generated by make menuconfig: don't edit # CONFIG_ARM=y # CONFIG_EISA is not set # CONFIG_SBUS is not set # CONFIG_MCA is not set CONFIG_UID16=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set # CONFIG_GENERIC_BUST_SPINLOCK is not set # CONFIG_GENERIC_ISA_DMA is not set # # Code maturity level options # CONFIG_EXPERIMENTAL=y CONFIG_ADVANCED_OPTIONS=y CONFIG_OBSOLETE=y # # Loadable module support # CONFIG_MODULES=y # CONFIG_MODVERSIONS is not set CONFIG_KMOD=y # # System Type # # CONFIG_ARCH_ADIFCC is not set # CONFIG_ARCH_ANAKIN is not set # CONFIG_ARCH_ARCA5K is not set # CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_CAMELOT is not set # CONFIG_ARCH_FOOTBRIDGE is not set CONFIG_ARCH_INTEGRATOR=y # CONFIG_ARCH_IOP3XX is not set # CONFIG_ARCH_IXP1200 is not set # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP425 is not set # CONFIG_ARCH_OMAHA is not set # CONFIG_ARCH_L7200 is not set # CONFIG_ARCH_MX1ADS is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_RISCSTATION is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_AT91RM9200DK is not set # # Archimedes/A5000 Implementations # # CONFIG_ARCH_ARC is not set # CONFIG_ARCH_A5K is not set # # Footbridge Implementations # # CONFIG_ARCH_CATS is not set # CONFIG_ARCH_PERSONAL_SERVER is not set # CONFIG_ARCH_EBSA285_ADDIN is not set # CONFIG_ARCH_EBSA285_HOST is not set # CONFIG_ARCH_NETWINDER is not set # # SA11x0 Implementations # # CONFIG_SA1100_ACCELENT is not set # CONFIG_SA1100_ASSABET is not set # CONFIG_ASSABET_NEPONSET is not set # CONFIG_SA1100_ADSAGC is not set # CONFIG_SA1100_ADSBITSY is not set # CONFIG_SA1100_ADSBITSYPLUS is not set # CONFIG_SA1100_BRUTUS is not set # CONFIG_SA1100_CEP is not set # CONFIG_SA1100_CERF is not set # CONFIG_SA1100_H3100 is not set # CONFIG_SA1100_H3600 is not set # CONFIG_SA1100_H3800 is not set # CONFIG_SA1100_H3XXX is not set # CONFIG_H3600_SLEEVE is not set # CONFIG_SA1100_EXTENEX1 is not set # CONFIG_SA1100_FLEXANET is not set # CONFIG_SA1100_FREEBIRD is not set # CONFIG_SA1100_FRODO is not set # CONFIG_SA1100_GRAPHICSCLIENT is not set # CONFIG_SA1100_GRAPHICSMASTER is not set # CONFIG_SA1100_HACKKIT is not set # CONFIG_SA1100_BADGE4 is not set # CONFIG_SA1100_JORNADA720 is not set # CONFIG_SA1100_HUW_WEBPANEL is not set # CONFIG_SA1100_ITSY is not set # CONFIG_SA1100_LART is not set # CONFIG_SA1100_NANOENGINE is not set # CONFIG_SA1100_OMNIMETER is not set # CONFIG_SA1100_PANGOLIN is not set # CONFIG_SA1100_PLEB is not set # CONFIG_SA1100_PT_SYSTEM3 is not set # CONFIG_SA1100_SHANNON is not set # CONFIG_SA1100_SHERMAN is not set # CONFIG_SA1100_SIMPAD is not set # CONFIG_SA1100_SIMPUTER is not set # CONFIG_SA1100_PFS168 is not set # CONFIG_SA1100_VICTOR is not set # CONFIG_SA1100_XP860 is not set # CONFIG_SA1100_YOPY is not set # CONFIG_SA1100_USB is not set # CONFIG_SA1100_USB_NETLINK is not set # CONFIG_SA1100_USB_CHAR is not set # CONFIG_SA1100_SSP is not set # # CLPS711X/EP721X Implementations # # CONFIG_ARCH_AUTCPU12 is not set # CONFIG_ARCH_CDB89712 is not set # CONFIG_ARCH_CLEP7312 is not set # CONFIG_ARCH_EDB7211 is not set # CONFIG_ARCH_FORTUNET is not set # CONFIG_ARCH_GUIDEA07 is not set # CONFIG_ARCH_P720T is not set # CONFIG_ARCH_EP7211 is not set # CONFIG_ARCH_EP7212 is not set # CONFIG_ARCH_ACORN is not set # CONFIG_FOOTBRIDGE is not set # CONFIG_FOOTBRIDGE_HOST is not set # CONFIG_FOOTBRIDGE_ADDIN is not set CONFIG_CPU_32=y # CONFIG_CPU_26 is not set # CONFIG_CPU_ARM610 is not set # CONFIG_CPU_ARM710 is not set # CONFIG_CPU_ARM720T is not set CONFIG_CPU_ARM920T=y # CONFIG_CPU_ARM922T is not set # CONFIG_PLD is not set # CONFIG_CPU_ARM926T is not set # CONFIG_CPU_ARM1020 is not set # CONFIG_CPU_ARM1026 is not set # CONFIG_CPU_SA110 is not set # CONFIG_CPU_SA1100 is not set # CONFIG_CPU_32v3 is not set CONFIG_CPU_32v4=y CONFIG_ARM_THUMB=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_DISCONTIGMEM is not set # CONFIG_CPU_BIG_ENDIAN is not set # # General setup # CONFIG_PCI_INTEGRATOR=y CONFIG_PCI=y # CONFIG_ISA is not set # CONFIG_ISA_DMA is not set # CONFIG_KERNEL_START_BOOL is not set CONFIG_KERNEL_START=0xc0000000 # CONFIG_ZBOOT_ROM is not set CONFIG_ZBOOT_ROM_TEXT=0 CONFIG_ZBOOT_ROM_BSS=0 # CONFIG_CPU_FREQ is not set CONFIG_PCI_NAMES=y CONFIG_HOTPLUG=y # # PCMCIA/CardBus support # # CONFIG_PCMCIA is not set # CONFIG_PCMCIA_CLPS6700 is not set # CONFIG_PCMCIA_SA1100 is not set CONFIG_NET=y CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y CONFIG_FPE_NWFPE=y # CONFIG_FPE_FASTFPE is not set CONFIG_KCORE_ELF=y # CONFIG_KCORE_AOUT is not set CONFIG_BINFMT_AOUT=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_PM is not set # CONFIG_ARTHUR is not set CONFIG_CMDLINE="root=/dev/nfs rw nfsroot=10.50.34.13:/home/nfs ip=10.50.34.17:10.50.34.13:10.50.32.1:255.255.248.0:::off console=ttyAM0,38400 init=/bin/sh " CONFIG_LEDS=y CONFIG_LEDS_TIMER=y CONFIG_LEDS_CPU=y CONFIG_ALIGNMENT_TRAP=y # # Parallel port support # # CONFIG_PARPORT is not set # # Memory Technology Devices (MTD) # CONFIG_MTD=y CONFIG_MTD_DEBUG=y CONFIG_MTD_DEBUG_VERBOSE=3 CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_CONCAT is not set CONFIG_MTD_REDBOOT_PARTS=y # CONFIG_MTD_CMDLINE_PARTS is not set CONFIG_MTD_AFS_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # # RAM/ROM/Flash chip drivers # CONFIG_MTD_CFI=y # CONFIG_MTD_JEDECPROBE is not set CONFIG_MTD_GEN_PROBE=y # CONFIG_MTD_CFI_ADV_OPTIONS is not set CONFIG_MTD_CFI_INTELEXT=y # CONFIG_MTD_CFI_AMDSTD is not set # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set # CONFIG_MTD_OBSOLETE_CHIPS is not set # CONFIG_MTD_AMDSTD is not set # CONFIG_MTD_SHARP is not set # CONFIG_MTD_JEDEC is not set # # Mapping drivers for chip access # # CONFIG_MTD_PHYSMAP is not set # CONFIG_MTD_NORA is not set CONFIG_MTD_ARM_INTEGRATOR=y # CONFIG_MTD_CDB89712 is not set # CONFIG_MTD_SA1100 is not set # CONFIG_MTD_DC21285 is not set # CONFIG_MTD_IOP3XX is not set # CONFIG_MTD_FORTUNET is not set # CONFIG_MTD_BRH is not set # CONFIG_MTD_EPXA is not set # CONFIG_MTD_AUTCPU12 is not set # CONFIG_MTD_EDB7312 is not set # CONFIG_MTD_IMPA7 is not set # CONFIG_MTD_IXP425 is not set # CONFIG_MTD_IXP2000 is not set # CONFIG_MTD_PCI is not set # # Self-contained MTD device drivers # # CONFIG_MTD_PMC551 is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_MTDRAM is not set # CONFIG_MTD_BLKMTD is not set # CONFIG_MTD_DOC1000 is not set # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOCPROBE is not set # # NAND Flash Device Drivers # # CONFIG_MTD_NAND is not set # # Plug and Play configuration # CONFIG_PNP=y CONFIG_ISAPNP=y # # Block devices # # CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_DEV_XD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_CISS_SCSI_TAPE is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_NBD=y # CONFIG_BLK_DEV_RAM is not set # CONFIG_BLK_DEV_INITRD is not set # # Multi-device support (RAID and LVM) # # CONFIG_MD is not set # CONFIG_BLK_DEV_MD is not set # CONFIG_MD_LINEAR is not set # CONFIG_MD_RAID0 is not set # CONFIG_MD_RAID1 is not set # CONFIG_MD_RAID5 is not set # CONFIG_MD_MULTIPATH is not set # CONFIG_BLK_DEV_LVM is not set # # Networking options # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y # CONFIG_NETLINK_DEV is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set CONFIG_FILTER=y CONFIG_UNIX=y CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set # CONFIG_INET_ECN is not set # CONFIG_SYN_COOKIES is not set # # IP: Netfilter Configuration # # CONFIG_IP_NF_CONNTRACK is not set # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set # CONFIG_IP_NF_COMPAT_IPCHAINS is not set # CONFIG_IP_NF_COMPAT_IPFWADM is not set # CONFIG_IPV6 is not set # CONFIG_KHTTPD is not set # CONFIG_ATM is not set # CONFIG_VLAN_8021Q is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # # Appletalk devices # # CONFIG_DEV_APPLETALK is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_LLC is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_FASTROUTE is not set # CONFIG_NET_HW_FLOWCONTROL is not set # # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # # Network device support # CONFIG_NETDEVICES=y # # ARCnet devices # # CONFIG_ARCNET is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_ETHERTAP is not set # CONFIG_NET_SB1000 is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y # CONFIG_ARM_AM79C961A is not set # CONFIG_ARM_CIRRUS is not set # CONFIG_SUNLANCE is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNBMAC is not set # CONFIG_SUNQE is not set # CONFIG_SUNGEM is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_LANCE is not set # CONFIG_NET_VENDOR_SMC is not set # CONFIG_NET_VENDOR_RACAL is not set # CONFIG_HP100 is not set # CONFIG_NET_ISA is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_APRICOT is not set # CONFIG_CS89x0 is not set # CONFIG_TULIP is not set # CONFIG_TC35815 is not set # CONFIG_DE4X5 is not set # CONFIG_DGRS is not set # CONFIG_DM9102 is not set CONFIG_EEPRO100=y # CONFIG_LNE390 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set # CONFIG_NE2K_PCI is not set # CONFIG_NE3210 is not set # CONFIG_ES3210 is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set # CONFIG_8139TOO_PIO is not set # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_NEW_RX_RESET is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_VIA_RHINE_MMIO is not set # CONFIG_WINBOND_840 is not set # CONFIG_ZNET is not set # CONFIG_NET_POCKET is not set # # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_MYRI_SBUS is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PLIP is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set # # Token Ring devices # # CONFIG_TR is not set # CONFIG_NET_FC is not set # CONFIG_RCPCI is not set # CONFIG_SHAPER is not set # # Wan interfaces # # CONFIG_WAN is not set # # Amateur Radio support # # CONFIG_HAMRADIO is not set # # IrDA (infrared) support # # CONFIG_IRDA is not set # # ATA/ATAPI/MFM/RLL support # # CONFIG_IDE is not set # CONFIG_BLK_DEV_IDE_MODES is not set # CONFIG_BLK_DEV_HD is not set # # SCSI support # # CONFIG_SCSI is not set # # IEEE 1394 (FireWire) support (EXPERIMENTAL) # CONFIG_IEEE1394=y CONFIG_IEEE1394_OHCI1394=y # CONFIG_IEEE1394_VIDEO1394 is not set # CONFIG_IEEE1394_SBP2 is not set # CONFIG_IEEE1394_ETH1394 is not set # CONFIG_IEEE1394_DV1394 is not set CONFIG_IEEE1394_RAWIO=y CONFIG_IEEE1394_CMP=y CONFIG_IEEE1394_AMDTP=y # CONFIG_IEEE1394_VERBOSEDEBUG is not set # # I2O device support # # CONFIG_I2O is not set # CONFIG_I2O_PCI is not set # CONFIG_I2O_BLOCK is not set # CONFIG_I2O_LAN is not set # CONFIG_I2O_SCSI is not set # CONFIG_I2O_PROC is not set # # ISDN subsystem # # CONFIG_ISDN is not set # # Input core support # CONFIG_INPUT=y CONFIG_INPUT_KEYBDEV=y CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_UINPUT is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y # CONFIG_SERIAL is not set # CONFIG_SERIAL_EXTENDED is not set # CONFIG_SERIAL_NONSTANDARD is not set # # Serial drivers # # CONFIG_SERIAL_ANAKIN is not set # CONFIG_SERIAL_ANAKIN_CONSOLE is not set CONFIG_SERIAL_AMBA=y CONFIG_SERIAL_AMBA_CONSOLE=y CONFIG_SERIAL_INTEGRATOR=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_CLPS711X is not set # CONFIG_SERIAL_CLPS711X_CONSOLE is not set # CONFIG_SERIAL_21285 is not set # CONFIG_SERIAL_21285_OLD is not set # CONFIG_SERIAL_21285_CONSOLE is not set # CONFIG_SERIAL_UART00 is not set # CONFIG_SERIAL_UART00_CONSOLE is not set # CONFIG_SERIAL_SA1100 is not set # CONFIG_SERIAL_SA1100_CONSOLE is not set # CONFIG_SERIAL_IXP1200 is not set # CONFIG_SERIAL_IXP1200_CONSOLE is not set # CONFIG_SERIAL_OMAHA is not set # CONFIG_SERIAL_OMAHA_CONSOLE is not set # CONFIG_SERIAL_AT91US3 is not set # CONFIG_SERIAL_AT91US3_CONSOLE is not set CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y # CONFIG_SERIAL_8250_EXTENDED is not set # CONFIG_SERIAL_8250_MANY_PORTS is not set # CONFIG_SERIAL_8250_SHARE_IRQ is not set # CONFIG_SERIAL_8250_DETECT_IRQ is not set # CONFIG_SERIAL_8250_MULTIPORT is not set # CONFIG_SERIAL_8250_HUB6 is not set CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 # CONFIG_IXP2000_SLAVE is not set # # I2C support # # CONFIG_I2C is not set # # L3 serial bus support # # CONFIG_L3 is not set # CONFIG_L3_ALGOBIT is not set # CONFIG_L3_BIT_SA1100_GPIO is not set # CONFIG_L3_SA1111 is not set # CONFIG_BIT_SA1100_GPIO is not set # # Mice # # CONFIG_BUSMOUSE is not set CONFIG_MOUSE=y CONFIG_PSMOUSE=y # CONFIG_82C710_MOUSE is not set # CONFIG_PC110_PAD is not set # CONFIG_MK712_MOUSE is not set # # Joysticks # # CONFIG_INPUT_GAMEPORT is not set # CONFIG_INPUT_NS558 is not set # CONFIG_INPUT_LIGHTNING is not set # CONFIG_INPUT_PCIGAME is not set # CONFIG_INPUT_CS461X is not set # CONFIG_INPUT_EMU10K1 is not set # CONFIG_INPUT_SERIO is not set # CONFIG_INPUT_SERPORT is not set # CONFIG_INPUT_ANALOG is not set # CONFIG_INPUT_A3D is not set # CONFIG_INPUT_ADI is not set # CONFIG_INPUT_COBRA is not set # CONFIG_INPUT_GF2K is not set # CONFIG_INPUT_GRIP is not set # CONFIG_INPUT_INTERACT is not set # CONFIG_INPUT_TMDC is not set # CONFIG_INPUT_SIDEWINDER is not set # CONFIG_INPUT_IFORCE_USB is not set # CONFIG_INPUT_IFORCE_232 is not set # CONFIG_INPUT_WARRIOR is not set # CONFIG_INPUT_MAGELLAN is not set # CONFIG_INPUT_SPACEORB is not set # CONFIG_INPUT_SPACEBALL is not set # CONFIG_INPUT_STINGER is not set # CONFIG_INPUT_DB9 is not set # CONFIG_INPUT_GAMECON is not set # CONFIG_INPUT_TURBOGRAFX is not set # CONFIG_QIC02_TAPE is not set # # Watchdog Cards # # CONFIG_WATCHDOG is not set # CONFIG_NVRAM is not set # CONFIG_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set # CONFIG_AGP is not set # CONFIG_DRM is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set # # File systems # CONFIG_QUOTA=y CONFIG_AUTOFS_FS=y CONFIG_AUTOFS4_FS=y # CONFIG_REISERFS_FS is not set # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set # CONFIG_ADFS_FS is not set # CONFIG_ADFS_FS_RW is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EXT3_FS is not set # CONFIG_JBD is not set # CONFIG_JBD_DEBUG is not set # CONFIG_FAT_FS is not set # CONFIG_MSDOS_FS is not set # CONFIG_UMSDOS_FS is not set # CONFIG_VFAT_FS is not set # CONFIG_EFS_FS is not set # CONFIG_JFFS_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=3 # CONFIG_CRAMFS is not set # CONFIG_TMPFS is not set CONFIG_RAMFS=y # CONFIG_ISO9660_FS is not set # CONFIG_JOLIET is not set # CONFIG_ZISOFS is not set # CONFIG_MINIX_FS is not set # CONFIG_VXFS_FS is not set # CONFIG_NTFS_FS is not set # CONFIG_NTFS_RW is not set # CONFIG_HPFS_FS is not set CONFIG_PROC_FS=y # CONFIG_DEVFS_FS is not set # CONFIG_DEVFS_MOUNT is not set # CONFIG_DEVFS_DEBUG is not set CONFIG_DEVPTS_FS=y # CONFIG_QNX4FS_FS is not set # CONFIG_QNX4FS_RW is not set # CONFIG_ROMFS_FS is not set CONFIG_EXT2_FS=y # CONFIG_SYSV_FS is not set # CONFIG_UDF_FS is not set # CONFIG_UDF_RW is not set # CONFIG_UFS_FS is not set # CONFIG_UFS_FS_WRITE is not set # # Network File Systems # CONFIG_CODA_FS=y # CONFIG_INTERMEZZO_FS is not set CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set # CONFIG_NFSD_V3 is not set CONFIG_SUNRPC=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y # CONFIG_SMB_FS is not set # CONFIG_NCP_FS is not set # CONFIG_NCPFS_PACKET_SIGNING is not set # CONFIG_NCPFS_IOCTL_LOCKING is not set # CONFIG_NCPFS_STRONG is not set # CONFIG_NCPFS_NFS_NS is not set # CONFIG_NCPFS_OS2_NS is not set # CONFIG_NCPFS_SMALLDOS is not set # CONFIG_NCPFS_NLS is not set # CONFIG_NCPFS_EXTRAS is not set # CONFIG_ZISOFS_FS is not set # CONFIG_ZLIB_FS_INFLATE is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y # CONFIG_SMB_NLS is not set # CONFIG_NLS is not set # # Console drivers # CONFIG_KMI_KEYB=y CONFIG_KMI_MOUSE=y CONFIG_PC_KEYMAP=y # CONFIG_VGA_CONSOLE is not set # # Frame-buffer support # # CONFIG_FB is not set # # Sound # # CONFIG_SOUND is not set # # Multimedia Capabilities Port drivers # # CONFIG_MCP is not set # CONFIG_MCP_SA1100 is not set # CONFIG_MCP_UCB1200 is not set # CONFIG_MCP_UCB1200_AUDIO is not set # CONFIG_MCP_UCB1200_TS is not set # # USB support # CONFIG_USB=y CONFIG_USB_DEBUG=y CONFIG_USB_DEVICEFS=y CONFIG_USB_BANDWIDTH=y # CONFIG_USB_LONG_TIMEOUT is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_UHCI=y # CONFIG_USB_UHCI_ALT is not set CONFIG_USB_OHCI=y # CONFIG_USB_OHCI_SA1111 is not set # CONFIG_USB_AUDIO is not set # CONFIG_USB_EMI26 is not set CONFIG_USB_BLUETOOTH=y # CONFIG_USB_STORAGE is not set # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_HP8200e is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y # CONFIG_USB_HIDDEV is not set # CONFIG_USB_WACOM is not set # CONFIG_USB_DC2XX is not set # CONFIG_USB_MDC800 is not set # CONFIG_USB_SCANNER is not set # CONFIG_USB_MICROTEK is not set # CONFIG_USB_HPUSBSCSI is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_CATC is not set CONFIG_USB_CDCETHER=y CONFIG_USB_USBNET=y # CONFIG_USB_USS720 is not set # # USB Serial Converter support # CONFIG_USB_SERIAL=y CONFIG_USB_SERIAL_DEBUG=y CONFIG_USB_SERIAL_GENERIC=y # CONFIG_USB_SERIAL_BELKIN is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set # CONFIG_USB_SERIAL_EMPEG is not set # CONFIG_USB_SERIAL_FTDI_SIO is not set # CONFIG_USB_SERIAL_VISOR is not set # CONFIG_USB_SERIAL_IPAQ is not set # CONFIG_USB_SERIAL_IR is not set # CONFIG_USB_SERIAL_EDGEPORT is not set # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set # CONFIG_USB_SERIAL_KEYSPAN is not set # CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set # CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set # CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set # CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set # CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set # CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set # CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set # CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set # CONFIG_USB_SERIAL_MCT_U232 is not set # CONFIG_USB_SERIAL_KLSI is not set # CONFIG_USB_SERIAL_PL2303 is not set # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set # CONFIG_USB_SERIAL_OMNINET is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_BRLVGER is not set # # Bluetooth support # # CONFIG_BLUEZ is not set # # Kernel hacking # CONFIG_FRAME_POINTER=y # CONFIG_DEBUG_USER is not set # CONFIG_DEBUG_INFO is not set # CONFIG_NO_PGT_CACHE is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_MAGIC_SYSRQ is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_WAITQ is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_ERRORS is not set # CONFIG_DEBUG_LL is not set # CONFIG_DEBUG_DC21285_PORT is not set # CONFIG_DEBUG_CLPS711X_UART2 is not set Thanks Prakash ------------------------------------------------------- This SF.Net email is sponsored by Yahoo. Introducing Yahoo! Search Developer Network - Create apps using Yahoo! Search APIs Find out how you can build Yahoo! directly into your own Applications - visit http://developer.yahoo.net/?fr=offad-ysdn-ostg-q22005 _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel