Hi, The attached patch adds the following new devices to the ftdi_sio driver:
* microHAM USB-Y6 and USB-Y8 devices submitted by Justin Burket (KL1RL). * Evolution Robotics ER1 Control Module submitted by Shawn M. Lavelle. Signed off by me in the attachment. Please apply. TIA. Ian Abbott.
ftdi_sio: Add new devices: * microHAM USB-Y6 and USB-Y8 devices submitted by Justin Burket (KL1RL). * Evolution Robotics ER1 Control Module submitted by Shawn M. Lavelle. Signed-off-by: Ian Abbott <[EMAIL PROTECTED]> diff -ur a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c --- a/drivers/usb/serial/ftdi_sio.c 2005-07-04 12:37:31.000000000 +0100 +++ b/drivers/usb/serial/ftdi_sio.c 2005-07-04 13:08:10.000000000 +0100 @@ -429,6 +429,9 @@ { USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_2_PID) }, { USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ACTIVE_ROBOTS_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y6_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_MHAM_Y8_PID) }, + { USB_DEVICE(EVOLUTION_VID, EVOLUTION_ER1_PID) }, { } /* Terminating entry */ }; diff -ur a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h --- a/drivers/usb/serial/ftdi_sio.h 2005-06-17 20:48:29.000000000 +0100 +++ b/drivers/usb/serial/ftdi_sio.h 2005-07-04 13:07:08.000000000 +0100 @@ -265,10 +265,24 @@ #define MOBILITY_USB_SERIAL_PID 0x0202 /* EasiDock USB 200 serial */ /* + * microHAM product IDs (http://www.microham.com). + * Submitted by Justin Burket (KL1RL) <[EMAIL PROTECTED]>. + */ +#define FTDI_MHAM_Y6_PID 0xEEEA /* USB-Y6 interface */ +#define FTDI_MHAM_Y8_PID 0xEEEB /* USB-Y8 interface */ + +/* * Active Robots product ids. */ #define FTDI_ACTIVE_ROBOTS_PID 0xE548 /* USB comms board */ +/* + * Evolution Robotics products (http://www.evolution.com/). + * Submitted by Shawn M. Lavelle. + */ +#define EVOLUTION_VID 0xDEEE /* Vendor ID */ +#define EVOLUTION_ER1_PID 0x0300 /* ER1 Control Module */ + /* Commands */ #define FTDI_SIO_RESET 0 /* Reset the port */ #define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */