Hi, When i connect my device (ethernet gadget) into the host. i get the message I am able to assign ip address to usb0 at the device side. i can see usb0 if i do on the device side. But, on the host side. i get the following error. I have modprobe'd usbnet driver and can see it when i do lsmod. Host Side dmesg: usbcore: registered new driver usbnet usb 2-2: new full speed USB device using address 6 usb 2-2: device not accepting address 6, error -71 usb 2-2: new full speed USB device using address 7 usb 2-2: device not accepting address 7, error -71 The usb gadget works for 2.6.12rc2 and can communicate with the host no problem.
But, does not work for 2.6.12 released version. i patched the difference between the 2 kernels but, i get the same problem. I am using OMAP 5912 OSK board and want it to function as an USB ethernet gadget. please advice. Regards, ram ------------------------------------------------------- This SF.Net email is sponsored by the 'Do More With Dual!' webinar happening July 14 at 8am PDT/11am EDT. We invite you to explore the latest in dual core and dual graphics technology at this free one hour event hosted by HP, AMD, and NVIDIA. To register visit http://www.hp.com/go/dualwebinar _______________________________________________ [email protected] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
