Am Donnerstag, 1. September 2005 23:32 schrieb Luigi Genoni:
> does not work properly.
>
> it seems to attach the device to /dev/usb/ttyACM0 as dmesg shows,
>
> usbcore: registered new driver cdc_acm
> drivers/usb/class/cdc-acm.c: v0.23:USB Abstract Control Model driver for
> USB modems and ISDN adapters
> usb 1-1: new full speed USB device using uhci_hcd and address 13
> cdc_acm 1-1:1.0: ttyACM0: USB ACM device
>
> but then pppd has problems, so trying to access the modem via minicom...
Recompile with debugging and post the syslog. This is not enough
to say anything intellegent about that.
Regards
Oliver
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
