From: Greg Kroah-Hartman <[EMAIL PROTECTED]>

People are complaining about a .old file in the tree.  So rename
drivers/usb/serial/ChangeLog.old to ChangeLog.history.

Signed-off-by: Greg Kroah-Hartman <[EMAIL PROTECTED]>
 
 drivers/usb/serial/ChangeLog.history |  730 +++++++++++++++++++++++++++++++++++
 drivers/usb/serial/ChangeLog.old     |  730 -----------------------------------
 2 files changed, 730 insertions(+), 730 deletions(-)

--- /dev/null   1970-01-01 00:00:00.000000000 +0000
+++ gregkh-2.6/drivers/usb/serial/ChangeLog.history     2005-11-12 
20:51:52.000000000 -0800
@@ -0,0 +1,730 @@
+This is the contents of some of the drivers/usb/serial/ files that had  old
+changelog comments.  They were quite old, and out of date, and we don't keep
+them anymore, so I've put them here, away from the source files, in case
+people still care to see them.
+
+- Greg Kroah-Hartman <[EMAIL PROTECTED]> October 20, 2005
+
+-----------------------------------------------------------------------
+usb-serial.h Change Log comments:
+
+ (03/26/2002) gkh
+       removed the port->tty check from port_paranoia_check() due to serial
+       consoles not having a tty device assigned to them.
+
+ (12/03/2001) gkh
+       removed active from the port structure.
+       added documentation to the usb_serial_device_type structure
+
+ (10/10/2001) gkh
+       added vendor and product to serial structure.  Needed to determine 
device
+       owner when the device is disconnected.
+
+ (05/30/2001) gkh
+       added sem to port structure and removed port_lock
+
+ (10/05/2000) gkh
+       Added interrupt_in_endpointAddress and bulk_in_endpointAddress to help
+       fix bug with urb->dev not being set properly, now that the usb core
+       needs it.
+
+ (09/11/2000) gkh
+       Added usb_serial_debug_data function to help get rid of #DEBUG in the
+       drivers.
+
+ (08/28/2000) gkh
+       Added port_lock to port structure.
+
+ (08/08/2000) gkh
+       Added open_count to port structure.
+
+ (07/23/2000) gkh
+       Added bulk_out_endpointAddress to port structure.
+
+ (07/19/2000) gkh, pberger, and borchers
+       Modifications to allow usb-serial drivers to be modules.
+
+-----------------------------------------------------------------------
+usb-serial.c Change Log comments:
+
+ (12/10/2002) gkh
+       Split the ports off into their own struct device, and added a
+       usb-serial bus driver.
+
+ (11/19/2002) gkh
+       removed a few #ifdefs for the generic code and cleaned up the failure
+       logic in initialization.
+
+ (10/02/2002) gkh
+       moved the console code to console.c and out of this file.
+
+ (06/05/2002) gkh
+       moved location of startup() call in serial_probe() until after all
+       of the port information and endpoints are initialized.  This makes
+       things easier for some drivers.
+
+ (04/10/2002) gkh
+       added serial_read_proc function which creates a
+       /proc/tty/driver/usb-serial file.
+
+ (03/27/2002) gkh
+       Got USB serial console code working properly and merged into the main
+       version of the tree.  Thanks to Randy Dunlap for the initial version
+       of this code, and for pushing me to finish it up.
+       The USB serial console works with any usb serial driver device.
+
+ (03/21/2002) gkh
+       Moved all manipulation of port->open_count into the core.  Now the
+       individual driver's open and close functions are called only when the
+       first open() and last close() is called.  Making the drivers a bit
+       smaller and simpler.
+       Fixed a bug if a driver didn't have the owner field set.
+
+ (02/26/2002) gkh
+       Moved all locking into the main serial_* functions, instead of having
+       the individual drivers have to grab the port semaphore.  This should
+       reduce races.
+       Reworked the MOD_INC logic a bit to always increment and decrement, even
+       if the generic driver is being used.
+
+ (10/10/2001) gkh
+       usb_serial_disconnect() now sets the serial->dev pointer is to NULL to
+       help prevent child drivers from accessing the device since it is now
+       gone.
+
+ (09/13/2001) gkh
+       Moved generic driver initialize after we have registered with the USB
+       core.  Thanks to Randy Dunlap for pointing this problem out.
+
+ (07/03/2001) gkh
+       Fixed module paramater size.  Thanks to John Brockmeyer for the pointer.
+       Fixed vendor and product getting defined through the MODULE_PARM macro
+       if the Generic driver wasn't compiled in.
+       Fixed problem with generic_shutdown() not being called for drivers that
+       don't have a shutdown() function.
+
+ (06/06/2001) gkh
+       added evil hack that is needed for the prolific pl2303 device due to the
+       crazy way its endpoints are set up.
+
+ (05/30/2001) gkh
+       switched from using spinlock to a semaphore, which fixes lots of 
problems.
+
+ (04/08/2001) gb
+       Identify version on module load.
+
+ 2001_02_05 gkh
+       Fixed buffer overflows bug with the generic serial driver.  Thanks to
+       Todd Squires <[EMAIL PROTECTED]> for fixing this.
+
+ (01/10/2001) gkh
+       Fixed bug where the generic serial adaptor grabbed _any_ device that was
+       offered to it.
+
+ (12/12/2000) gkh
+       Removed MOD_INC and MOD_DEC from poll and disconnect functions, and
+       moved them to the serial_open and serial_close functions.
+       Also fixed bug with there not being a MOD_DEC for the generic driver
+       (thanks to Gary Brubaker for finding this.)
+
+ (11/29/2000) gkh
+       Small NULL pointer initialization cleanup which saves a bit of disk 
image
+
+ (11/01/2000) Adam J. Richter
+       instead of using idVendor/idProduct pairs, usb serial drivers
+       now identify their hardware interest with usb_device_id tables,
+       which they usually have anyhow for use with MODULE_DEVICE_TABLE.
+
+ (10/05/2000) gkh
+       Fixed bug with urb->dev not being set properly, now that the usb
+       core needs it.
+
+ (09/11/2000) gkh
+       Removed DEBUG #ifdefs with call to usb_serial_debug_data
+
+ (08/28/2000) gkh
+       Added port_lock to port structure.
+       Added locks for SMP safeness to generic driver
+       Fixed the ability to open a generic device's port more than once.
+
+ (07/23/2000) gkh
+       Added bulk_out_endpointAddress to port structure.
+
+ (07/19/2000) gkh, pberger, and borchers
+       Modifications to allow usb-serial drivers to be modules.
+
+ (07/03/2000) gkh
+       Added more debugging to serial_ioctl call
+
+ (06/25/2000) gkh
+       Changed generic_write_bulk_callback to not call wake_up_interruptible
+       directly, but to have port_softint do it at a safer time.
+
+ (06/23/2000) gkh
+       Cleaned up debugging statements in a quest to find UHCI timeout bug.
+
+ (05/22/2000) gkh
+       Changed the makefile, enabling the big CONFIG_USB_SERIAL_SOMTHING to be
+       removed from the individual device source files.
+
+ (05/03/2000) gkh
+       Added the Digi Acceleport driver from Al Borchers and Peter Berger.
+
+ (05/02/2000) gkh
+       Changed devfs and tty register code to work properly now. This was 
based on
+       the ACM driver changes by Vojtech Pavlik.
+
+ (04/27/2000) Ryan VanderBijl
+       Put calls to *_paranoia_checks into one function.
+
+ (04/23/2000) gkh
+       Fixed bug that Randy Dunlap found for Generic devices with no bulk out 
ports.
+       Moved when the startup code printed out the devices that are supported.
+
+ (04/19/2000) gkh
+       Added driver for ZyXEL omni.net lcd plus ISDN TA
+       Made startup info message specify which drivers were compiled in.
+
+ (04/03/2000) gkh
+       Changed the probe process to remove the module unload races.
+       Changed where the tty layer gets initialized to have devfs work nicer.
+       Added initial devfs support.
+
+ (03/26/2000) gkh
+       Split driver up into device specific pieces.
+
+ (03/19/2000) gkh
+       Fixed oops that could happen when device was removed while a program
+       was talking to the device.
+       Removed the static urbs and now all urbs are created and destroyed
+       dynamically.
+       Reworked the internal interface. Now everything is based on the
+       usb_serial_port structure instead of the larger usb_serial structure.
+       This fixes the bug that a multiport device could not have more than
+       one port open at one time.
+
+ (03/17/2000) gkh
+       Added config option for debugging messages.
+       Added patch for keyspan pda from Brian Warner.
+
+ (03/06/2000) gkh
+       Added the keyspan pda code from Brian Warner <[EMAIL PROTECTED]>
+       Moved a bunch of the port specific stuff into its own structure. This
+       is in anticipation of the true multiport devices (there's a bug if you
+       try to access more than one port of any multiport device right now)
+
+ (02/21/2000) gkh
+       Made it so that any serial devices only have to specify which functions
+       they want to overload from the generic function calls (great,
+       inheritance in C, in a driver, just what I wanted...)
+       Added support for set_termios and ioctl function calls. No drivers take
+       advantage of this yet.
+       Removed the #ifdef MODULE, now there is no module specific code.
+       Cleaned up a few comments in usb-serial.h that were wrong (thanks again
+       to Miles Lott).
+       Small fix to get_free_serial.
+
+ (02/14/2000) gkh
+       Removed the Belkin and Peracom functionality from the driver due to
+       the lack of support from the vendor, and me not wanting people to
+       accidenatly buy the device, expecting it to work with Linux.
+       Added read_bulk_callback and write_bulk_callback to the type structure
+       for the needs of the FTDI and WhiteHEAT driver.
+       Changed all reverences to FTDI to FTDI_SIO at the request of Bill
+       Ryder.
+       Changed the output urb size back to the max endpoint size to make
+       the ftdi_sio driver have it easier, and due to the fact that it didn't
+       really increase the speed any.
+
+ (02/11/2000) gkh
+       Added VISOR_FUNCTION_CONSOLE to the visor startup function. This was a
+       patch from Miles Lott ([EMAIL PROTECTED]).
+       Fixed bug with not restoring the minor range that a device grabs, if
+       the startup function fails (thanks Miles for finding this).
+
+ (02/05/2000) gkh
+       Added initial framework for the Keyspan PDA serial converter so that
+       Brian Warner has a place to put his code.
+       Made the ezusb specific functions generic enough that different
+       devices can use them (whiteheat and keyspan_pda both need them).
+       Split out a whole bunch of structure and other stuff to a separate
+       usb-serial.h file.
+       Made the Visor connection messages a little more understandable, now
+       that Miles Lott ([EMAIL PROTECTED]) has gotten the Generic channel to
+       work. Also made them always show up in the log file.
+
+ (01/25/2000) gkh
+       Added initial framework for FTDI serial converter so that Bill Ryder
+       has a place to put his code.
+       Added the vendor specific info from Handspring. Now we can print out
+       informational debug messages as well as understand what is happening.
+
+ (01/23/2000) gkh
+       Fixed problem of crash when trying to open a port that didn't have a
+       device assigned to it. Made the minor node finding a little smarter,
+       now it looks to find a continuous space for the new device.
+
+ (01/21/2000) gkh
+       Fixed bug in visor_startup with patch from Miles Lott ([EMAIL 
PROTECTED])
+       Fixed get_serial_by_minor which was all messed up for multi port
+       devices. Fixed multi port problem for generic devices. Now the number
+       of ports is determined by the number of bulk out endpoints for the
+       generic device.
+
+ (01/19/2000) gkh
+       Removed lots of cruft that was around from the old (pre urb) driver
+       interface.
+       Made the serial_table dynamic. This should save lots of memory when
+       the number of minor nodes goes up to 256.
+       Added initial support for devices that have more than one port.
+       Added more debugging comments for the Visor, and added a needed
+       set_configuration call.
+
+ (01/17/2000) gkh
+       Fixed the WhiteHEAT firmware (my processing tool had a bug)
+       and added new debug loader firmware for it.
+       Removed the put_char function as it isn't really needed.
+       Added visor startup commands as found by the Win98 dump.
+
+ (01/13/2000) gkh
+       Fixed the vendor id for the generic driver to the one I meant it to be.
+
+ (01/12/2000) gkh
+       Forget the version numbering...that's pretty useless...
+       Made the driver able to be compiled so that the user can select which
+       converter they want to use. This allows people who only want the Visor
+       support to not pay the memory size price of the WhiteHEAT.
+       Fixed bug where the generic driver (idVendor=0000 and idProduct=0000)
+       grabbed the root hub. Not good.
+
+ version 0.4.0 (01/10/2000) gkh
+       Added whiteheat.h containing the firmware for the ConnectTech WhiteHEAT
+       device. Added startup function to allow firmware to be downloaded to
+       a device if it needs to be.
+       Added firmware download logic to the WhiteHEAT device.
+       Started to add #defines to split up the different drivers for potential
+       configuration option.
+
+ version 0.3.1 (12/30/99) gkh
+      Fixed problems with urb for bulk out.
+      Added initial support for multiple sets of endpoints. This enables
+      the Handspring Visor to be attached successfully. Only the first
+      bulk in / bulk out endpoint pair is being used right now.
+
+ version 0.3.0 (12/27/99) gkh
+       Added initial support for the Handspring Visor based on a patch from
+       Miles Lott ([EMAIL PROTECTED])
+       Cleaned up the code a bunch and converted over to using urbs only.
+
+ version 0.2.3 (12/21/99) gkh
+       Added initial support for the Connect Tech WhiteHEAT converter.
+       Incremented the number of ports in expectation of getting the
+       WhiteHEAT to work properly (4 ports per connection).
+       Added notification on insertion and removal of what port the
+       device is/was connected to (and what kind of device it was).
+
+ version 0.2.2 (12/16/99) gkh
+       Changed major number to the new allocated number. We're legal now!
+
+ version 0.2.1 (12/14/99) gkh
+       Fixed bug that happens when device node is opened when there isn't a
+       device attached to it. Thanks to [EMAIL PROTECTED] for noticing this.
+
+ version 0.2.0 (11/10/99) gkh
+       Split up internals to make it easier to add different types of serial
+       converters to the code.
+       Added a "generic" driver that gets it's vendor and product id
+       from when the module is loaded. Thanks to David E. Nelson ([EMAIL 
PROTECTED])
+       for the idea and sample code (from the usb scanner driver.)
+       Cleared up any licensing questions by releasing it under the GNU GPL.
+
+ version 0.1.2 (10/25/99) gkh
+       Fixed bug in detecting device.
+
+ version 0.1.1 (10/05/99) gkh
+       Changed the major number to not conflict with anything else.
+
+ version 0.1 (09/28/99) gkh
+       Can recognize the two different devices and start up a read from
+       device when asked to. Writes also work. No control signals yet, this
+       all is vendor specific data (i.e. no spec), also no control for
+       different baud rates or other bit settings.
+       Currently we are using the same devid as the acm driver. This needs
+       to change.
+
+-----------------------------------------------------------------------
+visor.c Change Log comments:
+
+ (06/03/2003) Judd Montgomery <judd at jpilot.org>
+     Added support for module parameter options for untested/unknown
+     devices.
+
+ (03/09/2003) gkh
+       Added support for the Sony Clie NZ90V device.  Thanks to Martin Brachtl
+       <[EMAIL PROTECTED]> for the information.
+
+ (03/05/2003) gkh
+       Think Treo support is now working.
+
+ (04/03/2002) gkh
+       Added support for the Sony OS 4.1 devices.  Thanks to Hiroyuki ARAKI
+       <[EMAIL PROTECTED]> for the information.
+
+ (03/27/2002) gkh
+       Removed assumptions that port->tty was always valid (is not true
+       for usb serial console devices.)
+
+ (03/23/2002) gkh
+       Added support for the Palm i705 device, thanks to Thomas Riemer
+       <[EMAIL PROTECTED]> for the information.
+
+ (03/21/2002) gkh
+       Added support for the Palm m130 device, thanks to Udo Eisenbarth
+       <[EMAIL PROTECTED]> for the information.
+
+ (02/27/2002) gkh
+       Reworked the urb handling logic.  We have no more pool, but dynamically
+       allocate the urb and the transfer buffer on the fly.  In testing this
+       does not incure any measurable overhead.  This also relies on the fact
+       that we have proper reference counting logic for urbs.
+
+ (02/21/2002) SilaS
+  Added initial support for the Palm m515 devices.
+
+ (02/14/2002) gkh
+       Added support for the Clie S-360 device.
+
+ (12/18/2001) gkh
+       Added better Clie support for 3.5 devices.  Thanks to Geoffrey Levand
+       for the patch.
+
+ (11/11/2001) gkh
+       Added support for the m125 devices, and added check to prevent oopses
+       for Cli? devices that lie about the number of ports they have.
+
+ (08/30/2001) gkh
+       Added support for the Clie devices, both the 3.5 and 4.0 os versions.
+       Many thanks to Daniel Burke, and Bryan Payne for helping with this.
+
+ (08/23/2001) gkh
+       fixed a few potential bugs pointed out by Oliver Neukum.
+
+ (05/30/2001) gkh
+       switched from using spinlock to a semaphore, which fixes lots of 
problems.
+
+ (05/28/2000) gkh
+       Added initial support for the Palm m500 and Palm m505 devices.
+
+ (04/08/2001) gb
+       Identify version on module load.
+
+ (01/21/2000) gkh
+       Added write_room and chars_in_buffer, as they were previously using the
+       generic driver versions which is all wrong now that we are using an urb
+       pool.  Thanks to Wolfgang Grandegger for pointing this out to me.
+       Removed count assignment in the write function, which was not needed 
anymore
+       either.  Thanks to Al Borchers for pointing this out.
+
+ (12/12/2000) gkh
+       Moved MOD_DEC to end of visor_close to be nicer, as the final write
+       message can sleep.
+
+ (11/12/2000) gkh
+       Fixed bug with data being dropped on the floor by forcing 
tty->low_latency
+       to be on.  Hopefully this fixes the OHCI issue!
+
+ (11/01/2000) Adam J. Richter
+       usb_device_id table support
+
+ (10/05/2000) gkh
+       Fixed bug with urb->dev not being set properly, now that the usb
+       core needs it.
+
+ (09/11/2000) gkh
+       Got rid of always calling kmalloc for every urb we wrote out to the
+       device.
+       Added visor_read_callback so we can keep track of bytes in and out for
+       those people who like to know the speed of their device.
+       Removed DEBUG #ifdefs with call to usb_serial_debug_data
+
+ (09/06/2000) gkh
+       Fixed oops in visor_exit.  Need to uncomment usb_unlink_urb call _after_
+       the host controller drivers set urb->dev = NULL when the urb is 
finished.
+
+ (08/28/2000) gkh
+       Added locks for SMP safeness.
+
+ (08/08/2000) gkh
+       Fixed endian problem in visor_startup.
+       Fixed MOD_INC and MOD_DEC logic and the ability to open a port more
+       than once.
+
+ (07/23/2000) gkh
+       Added pool of write urbs to speed up transfers to the visor.
+
+ (07/19/2000) gkh
+       Added module_init and module_exit functions to handle the fact that this
+       driver is a loadable module now.
+
+ (07/03/2000) gkh
+       Added visor_set_ioctl and visor_set_termios functions (they don't do 
much
+       of anything, but are good for debugging.)
+
+ (06/25/2000) gkh
+       Fixed bug in visor_unthrottle that should help with the disconnect in 
PPP
+       bug that people have been reporting.
+
+ (06/23/2000) gkh
+       Cleaned up debugging statements in a quest to find UHCI timeout bug.
+
+ (04/27/2000) Ryan VanderBijl
+       Fixed memory leak in visor_close
+
+ (03/26/2000) gkh
+       Split driver up into device specific pieces.
+
+-----------------------------------------------------------------------
+pl2303.c Change Log comments:
+
+ 2002_Mar_26 gkh
+       allowed driver to work properly if there is no tty assigned to a port
+       (this happens for serial console devices.)
+
+ 2001_Oct_06 gkh
+       Added RTS and DTR line control.  Thanks to [EMAIL PROTECTED] for parts 
of it.
+
+ 2001_Sep_19 gkh
+       Added break support.
+
+ 2001_Aug_30 gkh
+       fixed oops in write_bulk_callback.
+
+ 2001_Aug_28 gkh
+       reworked buffer logic to be like other usb-serial drivers.  Hopefully
+       removing some reported problems.
+
+ 2001_Jun_06 gkh
+       finished porting to 2.4 format.
+
+
+-----------------------------------------------------------------------
+io_edgeport.c Change Log comments:
+
+ 2003_04_03 al borchers
+  - fixed a bug (that shows up with dosemu) where the tty struct is
+    used in a callback after it has been freed
+
+ 2.3 2002_03_08 greg kroah-hartman
+       - fixed bug when multiple devices were attached at the same time.
+
+ 2.2 2001_11_14 greg kroah-hartman
+       - fixed bug in edge_close that kept the port from being used more
+         than once.
+       - fixed memory leak on device removal.
+       - fixed potential double free of memory when command urb submitting
+         failed.
+       - other small cleanups when the device is removed
+
+ 2.1 2001_07_09 greg kroah-hartman
+       - added support for TIOCMBIS and TIOCMBIC.
+
+     (04/08/2001) gb
+       - Identify version on module load.
+
+ 2.0 2001_03_05 greg kroah-hartman
+       - reworked entire driver to fit properly in with the other usb-serial
+         drivers.  Occasional oopses still happen, but it's a good start.
+
+ 1.2.3 (02/23/2001) greg kroah-hartman
+       - changed device table to work properly for 2.4.x final format.
+       - fixed problem with dropping data at high data rates.
+
+ 1.2.2 (11/27/2000) greg kroah-hartman
+       - cleaned up more NTisms.
+       - Added device table for 2.4.0-test11
+
+ 1.2.1 (11/08/2000) greg kroah-hartman
+       - Started to clean up NTisms.
+       - Fixed problem with dev field of urb for kernels >= 2.4.0-test9
+
+ 1.2 (10/17/2000) David Iacovelli
+       Remove all EPIC code and GPL source
+  Fix RELEVANT_IFLAG macro to include flow control
+  changes port configuration changes.
+  Fix redefinition of SERIAL_MAGIC
+  Change all timeout values to 5 seconds
+  Tried to fix the UHCI multiple urb submission, but failed miserably.
+  it seems to work fine with OHCI.
+  ( Greg take a look at the #if 0 at end of WriteCmdUsb() we must
+    find a way to work arount this UHCI bug )
+
+ 1.1 (10/11/2000) David Iacovelli
+  Fix XON/XOFF flow control to support both IXON and IXOFF
+
+ 0.9.27 (06/30/2000) David Iacovelli
+  Added transmit queue and now allocate urb for command writes.
+
+ 0.9.26 (06/29/2000) David Iacovelli
+  Add support for 80251 based edgeport
+
+ 0.9.25 (06/27/2000) David Iacovelli
+  Do not close the port if it has multiple opens.
+
+ 0.9.24 (05/26/2000) David Iacovelli
+  Add IOCTLs to support RXTX and JAVA POS
+  and first cut at running BlackBox Demo
+
+ 0.9.23 (05/24/2000) David Iacovelli
+  Add IOCTLs to support RXTX and JAVA POS
+
+ 0.9.22 (05/23/2000) David Iacovelli
+  fixed bug in enumeration.  If epconfig turns on mapping by
+  path after a device is already plugged in, we now update
+  the mapping correctly
+
+ 0.9.21 (05/16/2000) David Iacovelli
+  Added BlockUntilChaseResp() to also wait for txcredits
+  Updated the way we allocate and handle write URBs
+       Add debug code to dump buffers
+
+ 0.9.20 (05/01/2000) David Iacovelli
+       change driver to use usb/tts/
+
+ 0.9.19 (05/01/2000) David Iacovelli
+  Update code to compile if DEBUG is off
+
+ 0.9.18 (04/28/2000) David Iacovelli
+  cleanup and test tty_register with devfs
+
+ 0.9.17 (04/27/2000) greg kroah-hartman
+       changed tty_register around to be like the way it
+       was before, but now it works properly with devfs.
+
+ 0.9.16 (04/26/2000) david iacovelli
+  Fixed bug in GetProductInfo()
+
+ 0.9.15 (04/25/2000) david iacovelli
+       Updated enumeration
+
+ 0.9.14 (04/24/2000) david iacovelli
+  Removed all config/status IOCTLS and
+  converted to using /proc/edgeport
+  still playing with devfs
+
+ 0.9.13 (04/24/2000) david iacovelli
+  Removed configuration based on ttyUSB0
+  Added support for configuration using /prod/edgeport
+  first attempt at using devfs (not working yet!)
+  Added IOCTL to GetProductInfo()
+  Added support for custom baud rates
+       Add support for random port numbers
+
+ 0.9.12 (04/18/2000) david iacovelli
+       added additional configuration IOCTLs
+  use ttyUSB0 for configuration
+
+ 0.9.11 (04/17/2000) greg kroah-hartman
+       fixed module initialization race conditions.
+       made all urbs dynamically allocated.
+       made driver devfs compatible. now it only registers the tty device
+       when the device is actually plugged in.
+
+ 0.9.10 (04/13/2000) greg kroah-hartman
+       added proc interface framework.
+
+ 0.9.9 (04/13/2000) david iacovelli
+       added enumeration code and ioctls to configure the device
+
+ 0.9.8 (04/12/2000) david iacovelli
+  Change interrupt read start when device is plugged in
+  and stop when device is removed
+       process interrupt reads when all ports are closed
+  (keep value of rxBytesAvail consistent with the edgeport)
+  set the USB_BULK_QUEUE flag so that we can shove a bunch
+  of urbs at once down the pipe
+
+ 0.9.7 (04/10/2000) david iacovelli
+       start to add enumeration code.
+  generate serial number for epic devices
+  add support for kdb
+
+ 0.9.6 (03/30/2000) david iacovelli
+  add IOCTL to get string, manufacture, and boot descriptors
+
+ 0.9.5 (03/14/2000) greg kroah-hartman
+       more error checking added to SerialOpen to try to fix UHCI open problem
+
+ 0.9.4 (03/09/2000) greg kroah-hartman
+       added more error checking to handle oops when data is hanging
+       around and tty is abruptly closed.
+
+ 0.9.3 (03/09/2000) david iacovelli
+       Add epic support for xon/xoff chars
+       play with performance
+
+ 0.9.2 (03/08/2000) greg kroah-hartman
+       changed most "info" calls to "dbg"
+       implemented flow control properly in the termios call
+
+ 0.9.1 (03/08/2000) david iacovelli
+       added EPIC support
+       enabled bootloader update
+
+ 0.9 (03/08/2000) greg kroah-hartman
+       Release to IO networks.
+       Integrated changes that David made
+  made getting urbs for writing SMP safe
+
+ 0.8 (03/07/2000) greg kroah-hartman
+       Release to IO networks.
+       Fixed problems that were seen in code by David.
+  Now both Edgeport/4 and Edgeport/2 works properly.
+  Changed most of the functions to use port instead of serial.
+
+ 0.7 (02/27/2000) greg kroah-hartman
+       Milestone 3 release.
+       Release to IO Networks
+       ioctl for waiting on line change implemented.
+       ioctl for getting statistics implemented.
+       multiport support working.
+       lsr and msr registers are now handled properly.
+       change break now hooked up and working.
+       support for all known Edgeport devices.
+
+ 0.6 (02/22/2000) greg kroah-hartman
+       Release to IO networks.
+       CHASE is implemented correctly when port is closed.
+       SerialOpen now blocks correctly until port is fully opened.
+
+ 0.5 (02/20/2000) greg kroah-hartman
+       Release to IO networks.
+       Known problems:
+               modem status register changes are not sent on to the user
+               CHASE is not implemented when the port is closed.
+
+ 0.4 (02/16/2000) greg kroah-hartman
+       Second cut at the CeBit demo.
+       Doesn't leak memory on every write to the port
+       Still small leaks on startup.
+       Added support for Edgeport/2 and Edgeport/8
+
+ 0.3 (02/15/2000) greg kroah-hartman
+       CeBit demo release.
+       Force the line settings to 4800, 8, 1, e for the demo.
+       Warning! This version leaks memory like crazy!
+
+ 0.2 (01/30/2000) greg kroah-hartman
+       Milestone 1 release.
+       Device is found by USB subsystem, enumerated, fimware is downloaded
+       and the descriptors are printed to the debug log, config is set, and
+       green light starts to blink. Open port works, and data can be sent
+       and received at the default settings of the UART. Loopback connector
+       and debug log confirms this.
+
+ 0.1 (01/23/2000) greg kroah-hartman
+       Initial release to help IO Networks try to set up their test system.
+       Edgeport4 is recognized, firmware is downloaded, config is set so
+       device blinks green light every 3 sec. Port is bound, but opening,
+       closing, and sending data do not work properly.
+
+
--- gregkh-2.6.orig/drivers/usb/serial/ChangeLog.old    2005-11-11 
22:48:28.000000000 -0800
+++ /dev/null   1970-01-01 00:00:00.000000000 +0000
@@ -1,730 +0,0 @@
-This is the contents of some of the drivers/usb/serial/ files that had  old
-changelog comments.  They were quite old, and out of date, and we don't keep
-them anymore, so I've put them here, away from the source files, in case
-people still care to see them.
-
-- Greg Kroah-Hartman <[EMAIL PROTECTED]> October 20, 2005
-
------------------------------------------------------------------------
-usb-serial.h Change Log comments:
-
- (03/26/2002) gkh
-       removed the port->tty check from port_paranoia_check() due to serial
-       consoles not having a tty device assigned to them.
-
- (12/03/2001) gkh
-       removed active from the port structure.
-       added documentation to the usb_serial_device_type structure
-
- (10/10/2001) gkh
-       added vendor and product to serial structure.  Needed to determine 
device
-       owner when the device is disconnected.
-
- (05/30/2001) gkh
-       added sem to port structure and removed port_lock
-
- (10/05/2000) gkh
-       Added interrupt_in_endpointAddress and bulk_in_endpointAddress to help
-       fix bug with urb->dev not being set properly, now that the usb core
-       needs it.
-
- (09/11/2000) gkh
-       Added usb_serial_debug_data function to help get rid of #DEBUG in the
-       drivers.
-
- (08/28/2000) gkh
-       Added port_lock to port structure.
-
- (08/08/2000) gkh
-       Added open_count to port structure.
-
- (07/23/2000) gkh
-       Added bulk_out_endpointAddress to port structure.
-
- (07/19/2000) gkh, pberger, and borchers
-       Modifications to allow usb-serial drivers to be modules.
-
------------------------------------------------------------------------
-usb-serial.c Change Log comments:
-
- (12/10/2002) gkh
-       Split the ports off into their own struct device, and added a
-       usb-serial bus driver.
-
- (11/19/2002) gkh
-       removed a few #ifdefs for the generic code and cleaned up the failure
-       logic in initialization.
-
- (10/02/2002) gkh
-       moved the console code to console.c and out of this file.
-
- (06/05/2002) gkh
-       moved location of startup() call in serial_probe() until after all
-       of the port information and endpoints are initialized.  This makes
-       things easier for some drivers.
-
- (04/10/2002) gkh
-       added serial_read_proc function which creates a
-       /proc/tty/driver/usb-serial file.
-
- (03/27/2002) gkh
-       Got USB serial console code working properly and merged into the main
-       version of the tree.  Thanks to Randy Dunlap for the initial version
-       of this code, and for pushing me to finish it up.
-       The USB serial console works with any usb serial driver device.
-
- (03/21/2002) gkh
-       Moved all manipulation of port->open_count into the core.  Now the
-       individual driver's open and close functions are called only when the
-       first open() and last close() is called.  Making the drivers a bit
-       smaller and simpler.
-       Fixed a bug if a driver didn't have the owner field set.
-
- (02/26/2002) gkh
-       Moved all locking into the main serial_* functions, instead of having
-       the individual drivers have to grab the port semaphore.  This should
-       reduce races.
-       Reworked the MOD_INC logic a bit to always increment and decrement, even
-       if the generic driver is being used.
-
- (10/10/2001) gkh
-       usb_serial_disconnect() now sets the serial->dev pointer is to NULL to
-       help prevent child drivers from accessing the device since it is now
-       gone.
-
- (09/13/2001) gkh
-       Moved generic driver initialize after we have registered with the USB
-       core.  Thanks to Randy Dunlap for pointing this problem out.
-
- (07/03/2001) gkh
-       Fixed module paramater size.  Thanks to John Brockmeyer for the pointer.
-       Fixed vendor and product getting defined through the MODULE_PARM macro
-       if the Generic driver wasn't compiled in.
-       Fixed problem with generic_shutdown() not being called for drivers that
-       don't have a shutdown() function.
-
- (06/06/2001) gkh
-       added evil hack that is needed for the prolific pl2303 device due to the
-       crazy way its endpoints are set up.
-
- (05/30/2001) gkh
-       switched from using spinlock to a semaphore, which fixes lots of 
problems.
-
- (04/08/2001) gb
-       Identify version on module load.
-
- 2001_02_05 gkh
-       Fixed buffer overflows bug with the generic serial driver.  Thanks to
-       Todd Squires <[EMAIL PROTECTED]> for fixing this.
-
- (01/10/2001) gkh
-       Fixed bug where the generic serial adaptor grabbed _any_ device that was
-       offered to it.
-
- (12/12/2000) gkh
-       Removed MOD_INC and MOD_DEC from poll and disconnect functions, and
-       moved them to the serial_open and serial_close functions.
-       Also fixed bug with there not being a MOD_DEC for the generic driver
-       (thanks to Gary Brubaker for finding this.)
-
- (11/29/2000) gkh
-       Small NULL pointer initialization cleanup which saves a bit of disk 
image
-
- (11/01/2000) Adam J. Richter
-       instead of using idVendor/idProduct pairs, usb serial drivers
-       now identify their hardware interest with usb_device_id tables,
-       which they usually have anyhow for use with MODULE_DEVICE_TABLE.
-
- (10/05/2000) gkh
-       Fixed bug with urb->dev not being set properly, now that the usb
-       core needs it.
-
- (09/11/2000) gkh
-       Removed DEBUG #ifdefs with call to usb_serial_debug_data
-
- (08/28/2000) gkh
-       Added port_lock to port structure.
-       Added locks for SMP safeness to generic driver
-       Fixed the ability to open a generic device's port more than once.
-
- (07/23/2000) gkh
-       Added bulk_out_endpointAddress to port structure.
-
- (07/19/2000) gkh, pberger, and borchers
-       Modifications to allow usb-serial drivers to be modules.
-
- (07/03/2000) gkh
-       Added more debugging to serial_ioctl call
-
- (06/25/2000) gkh
-       Changed generic_write_bulk_callback to not call wake_up_interruptible
-       directly, but to have port_softint do it at a safer time.
-
- (06/23/2000) gkh
-       Cleaned up debugging statements in a quest to find UHCI timeout bug.
-
- (05/22/2000) gkh
-       Changed the makefile, enabling the big CONFIG_USB_SERIAL_SOMTHING to be
-       removed from the individual device source files.
-
- (05/03/2000) gkh
-       Added the Digi Acceleport driver from Al Borchers and Peter Berger.
-
- (05/02/2000) gkh
-       Changed devfs and tty register code to work properly now. This was 
based on
-       the ACM driver changes by Vojtech Pavlik.
-
- (04/27/2000) Ryan VanderBijl
-       Put calls to *_paranoia_checks into one function.
-
- (04/23/2000) gkh
-       Fixed bug that Randy Dunlap found for Generic devices with no bulk out 
ports.
-       Moved when the startup code printed out the devices that are supported.
-
- (04/19/2000) gkh
-       Added driver for ZyXEL omni.net lcd plus ISDN TA
-       Made startup info message specify which drivers were compiled in.
-
- (04/03/2000) gkh
-       Changed the probe process to remove the module unload races.
-       Changed where the tty layer gets initialized to have devfs work nicer.
-       Added initial devfs support.
-
- (03/26/2000) gkh
-       Split driver up into device specific pieces.
-
- (03/19/2000) gkh
-       Fixed oops that could happen when device was removed while a program
-       was talking to the device.
-       Removed the static urbs and now all urbs are created and destroyed
-       dynamically.
-       Reworked the internal interface. Now everything is based on the
-       usb_serial_port structure instead of the larger usb_serial structure.
-       This fixes the bug that a multiport device could not have more than
-       one port open at one time.
-
- (03/17/2000) gkh
-       Added config option for debugging messages.
-       Added patch for keyspan pda from Brian Warner.
-
- (03/06/2000) gkh
-       Added the keyspan pda code from Brian Warner <[EMAIL PROTECTED]>
-       Moved a bunch of the port specific stuff into its own structure. This
-       is in anticipation of the true multiport devices (there's a bug if you
-       try to access more than one port of any multiport device right now)
-
- (02/21/2000) gkh
-       Made it so that any serial devices only have to specify which functions
-       they want to overload from the generic function calls (great,
-       inheritance in C, in a driver, just what I wanted...)
-       Added support for set_termios and ioctl function calls. No drivers take
-       advantage of this yet.
-       Removed the #ifdef MODULE, now there is no module specific code.
-       Cleaned up a few comments in usb-serial.h that were wrong (thanks again
-       to Miles Lott).
-       Small fix to get_free_serial.
-
- (02/14/2000) gkh
-       Removed the Belkin and Peracom functionality from the driver due to
-       the lack of support from the vendor, and me not wanting people to
-       accidenatly buy the device, expecting it to work with Linux.
-       Added read_bulk_callback and write_bulk_callback to the type structure
-       for the needs of the FTDI and WhiteHEAT driver.
-       Changed all reverences to FTDI to FTDI_SIO at the request of Bill
-       Ryder.
-       Changed the output urb size back to the max endpoint size to make
-       the ftdi_sio driver have it easier, and due to the fact that it didn't
-       really increase the speed any.
-
- (02/11/2000) gkh
-       Added VISOR_FUNCTION_CONSOLE to the visor startup function. This was a
-       patch from Miles Lott ([EMAIL PROTECTED]).
-       Fixed bug with not restoring the minor range that a device grabs, if
-       the startup function fails (thanks Miles for finding this).
-
- (02/05/2000) gkh
-       Added initial framework for the Keyspan PDA serial converter so that
-       Brian Warner has a place to put his code.
-       Made the ezusb specific functions generic enough that different
-       devices can use them (whiteheat and keyspan_pda both need them).
-       Split out a whole bunch of structure and other stuff to a separate
-       usb-serial.h file.
-       Made the Visor connection messages a little more understandable, now
-       that Miles Lott ([EMAIL PROTECTED]) has gotten the Generic channel to
-       work. Also made them always show up in the log file.
-
- (01/25/2000) gkh
-       Added initial framework for FTDI serial converter so that Bill Ryder
-       has a place to put his code.
-       Added the vendor specific info from Handspring. Now we can print out
-       informational debug messages as well as understand what is happening.
-
- (01/23/2000) gkh
-       Fixed problem of crash when trying to open a port that didn't have a
-       device assigned to it. Made the minor node finding a little smarter,
-       now it looks to find a continuous space for the new device.
-
- (01/21/2000) gkh
-       Fixed bug in visor_startup with patch from Miles Lott ([EMAIL 
PROTECTED])
-       Fixed get_serial_by_minor which was all messed up for multi port
-       devices. Fixed multi port problem for generic devices. Now the number
-       of ports is determined by the number of bulk out endpoints for the
-       generic device.
-
- (01/19/2000) gkh
-       Removed lots of cruft that was around from the old (pre urb) driver
-       interface.
-       Made the serial_table dynamic. This should save lots of memory when
-       the number of minor nodes goes up to 256.
-       Added initial support for devices that have more than one port.
-       Added more debugging comments for the Visor, and added a needed
-       set_configuration call.
-
- (01/17/2000) gkh
-       Fixed the WhiteHEAT firmware (my processing tool had a bug)
-       and added new debug loader firmware for it.
-       Removed the put_char function as it isn't really needed.
-       Added visor startup commands as found by the Win98 dump.
-
- (01/13/2000) gkh
-       Fixed the vendor id for the generic driver to the one I meant it to be.
-
- (01/12/2000) gkh
-       Forget the version numbering...that's pretty useless...
-       Made the driver able to be compiled so that the user can select which
-       converter they want to use. This allows people who only want the Visor
-       support to not pay the memory size price of the WhiteHEAT.
-       Fixed bug where the generic driver (idVendor=0000 and idProduct=0000)
-       grabbed the root hub. Not good.
-
- version 0.4.0 (01/10/2000) gkh
-       Added whiteheat.h containing the firmware for the ConnectTech WhiteHEAT
-       device. Added startup function to allow firmware to be downloaded to
-       a device if it needs to be.
-       Added firmware download logic to the WhiteHEAT device.
-       Started to add #defines to split up the different drivers for potential
-       configuration option.
-
- version 0.3.1 (12/30/99) gkh
-      Fixed problems with urb for bulk out.
-      Added initial support for multiple sets of endpoints. This enables
-      the Handspring Visor to be attached successfully. Only the first
-      bulk in / bulk out endpoint pair is being used right now.
-
- version 0.3.0 (12/27/99) gkh
-       Added initial support for the Handspring Visor based on a patch from
-       Miles Lott ([EMAIL PROTECTED])
-       Cleaned up the code a bunch and converted over to using urbs only.
-
- version 0.2.3 (12/21/99) gkh
-       Added initial support for the Connect Tech WhiteHEAT converter.
-       Incremented the number of ports in expectation of getting the
-       WhiteHEAT to work properly (4 ports per connection).
-       Added notification on insertion and removal of what port the
-       device is/was connected to (and what kind of device it was).
-
- version 0.2.2 (12/16/99) gkh
-       Changed major number to the new allocated number. We're legal now!
-
- version 0.2.1 (12/14/99) gkh
-       Fixed bug that happens when device node is opened when there isn't a
-       device attached to it. Thanks to [EMAIL PROTECTED] for noticing this.
-
- version 0.2.0 (11/10/99) gkh
-       Split up internals to make it easier to add different types of serial
-       converters to the code.
-       Added a "generic" driver that gets it's vendor and product id
-       from when the module is loaded. Thanks to David E. Nelson ([EMAIL 
PROTECTED])
-       for the idea and sample code (from the usb scanner driver.)
-       Cleared up any licensing questions by releasing it under the GNU GPL.
-
- version 0.1.2 (10/25/99) gkh
-       Fixed bug in detecting device.
-
- version 0.1.1 (10/05/99) gkh
-       Changed the major number to not conflict with anything else.
-
- version 0.1 (09/28/99) gkh
-       Can recognize the two different devices and start up a read from
-       device when asked to. Writes also work. No control signals yet, this
-       all is vendor specific data (i.e. no spec), also no control for
-       different baud rates or other bit settings.
-       Currently we are using the same devid as the acm driver. This needs
-       to change.
-
------------------------------------------------------------------------
-visor.c Change Log comments:
-
- (06/03/2003) Judd Montgomery <judd at jpilot.org>
-     Added support for module parameter options for untested/unknown
-     devices.
-
- (03/09/2003) gkh
-       Added support for the Sony Clie NZ90V device.  Thanks to Martin Brachtl
-       <[EMAIL PROTECTED]> for the information.
-
- (03/05/2003) gkh
-       Think Treo support is now working.
-
- (04/03/2002) gkh
-       Added support for the Sony OS 4.1 devices.  Thanks to Hiroyuki ARAKI
-       <[EMAIL PROTECTED]> for the information.
-
- (03/27/2002) gkh
-       Removed assumptions that port->tty was always valid (is not true
-       for usb serial console devices.)
-
- (03/23/2002) gkh
-       Added support for the Palm i705 device, thanks to Thomas Riemer
-       <[EMAIL PROTECTED]> for the information.
-
- (03/21/2002) gkh
-       Added support for the Palm m130 device, thanks to Udo Eisenbarth
-       <[EMAIL PROTECTED]> for the information.
-
- (02/27/2002) gkh
-       Reworked the urb handling logic.  We have no more pool, but dynamically
-       allocate the urb and the transfer buffer on the fly.  In testing this
-       does not incure any measurable overhead.  This also relies on the fact
-       that we have proper reference counting logic for urbs.
-
- (02/21/2002) SilaS
-  Added initial support for the Palm m515 devices.
-
- (02/14/2002) gkh
-       Added support for the Clie S-360 device.
-
- (12/18/2001) gkh
-       Added better Clie support for 3.5 devices.  Thanks to Geoffrey Levand
-       for the patch.
-
- (11/11/2001) gkh
-       Added support for the m125 devices, and added check to prevent oopses
-       for Cli?? devices that lie about the number of ports they have.
-
- (08/30/2001) gkh
-       Added support for the Clie devices, both the 3.5 and 4.0 os versions.
-       Many thanks to Daniel Burke, and Bryan Payne for helping with this.
-
- (08/23/2001) gkh
-       fixed a few potential bugs pointed out by Oliver Neukum.
-
- (05/30/2001) gkh
-       switched from using spinlock to a semaphore, which fixes lots of 
problems.
-
- (05/28/2000) gkh
-       Added initial support for the Palm m500 and Palm m505 devices.
-
- (04/08/2001) gb
-       Identify version on module load.
-
- (01/21/2000) gkh
-       Added write_room and chars_in_buffer, as they were previously using the
-       generic driver versions which is all wrong now that we are using an urb
-       pool.  Thanks to Wolfgang Grandegger for pointing this out to me.
-       Removed count assignment in the write function, which was not needed 
anymore
-       either.  Thanks to Al Borchers for pointing this out.
-
- (12/12/2000) gkh
-       Moved MOD_DEC to end of visor_close to be nicer, as the final write
-       message can sleep.
-
- (11/12/2000) gkh
-       Fixed bug with data being dropped on the floor by forcing 
tty->low_latency
-       to be on.  Hopefully this fixes the OHCI issue!
-
- (11/01/2000) Adam J. Richter
-       usb_device_id table support
-
- (10/05/2000) gkh
-       Fixed bug with urb->dev not being set properly, now that the usb
-       core needs it.
-
- (09/11/2000) gkh
-       Got rid of always calling kmalloc for every urb we wrote out to the
-       device.
-       Added visor_read_callback so we can keep track of bytes in and out for
-       those people who like to know the speed of their device.
-       Removed DEBUG #ifdefs with call to usb_serial_debug_data
-
- (09/06/2000) gkh
-       Fixed oops in visor_exit.  Need to uncomment usb_unlink_urb call _after_
-       the host controller drivers set urb->dev = NULL when the urb is 
finished.
-
- (08/28/2000) gkh
-       Added locks for SMP safeness.
-
- (08/08/2000) gkh
-       Fixed endian problem in visor_startup.
-       Fixed MOD_INC and MOD_DEC logic and the ability to open a port more
-       than once.
-
- (07/23/2000) gkh
-       Added pool of write urbs to speed up transfers to the visor.
-
- (07/19/2000) gkh
-       Added module_init and module_exit functions to handle the fact that this
-       driver is a loadable module now.
-
- (07/03/2000) gkh
-       Added visor_set_ioctl and visor_set_termios functions (they don't do 
much
-       of anything, but are good for debugging.)
-
- (06/25/2000) gkh
-       Fixed bug in visor_unthrottle that should help with the disconnect in 
PPP
-       bug that people have been reporting.
-
- (06/23/2000) gkh
-       Cleaned up debugging statements in a quest to find UHCI timeout bug.
-
- (04/27/2000) Ryan VanderBijl
-       Fixed memory leak in visor_close
-
- (03/26/2000) gkh
-       Split driver up into device specific pieces.
-
------------------------------------------------------------------------
-pl2303.c Change Log comments:
-
- 2002_Mar_26 gkh
-       allowed driver to work properly if there is no tty assigned to a port
-       (this happens for serial console devices.)
-
- 2001_Oct_06 gkh
-       Added RTS and DTR line control.  Thanks to [EMAIL PROTECTED] for parts 
of it.
-
- 2001_Sep_19 gkh
-       Added break support.
-
- 2001_Aug_30 gkh
-       fixed oops in write_bulk_callback.
-
- 2001_Aug_28 gkh
-       reworked buffer logic to be like other usb-serial drivers.  Hopefully
-       removing some reported problems.
-
- 2001_Jun_06 gkh
-       finished porting to 2.4 format.
-
-
------------------------------------------------------------------------
-io_edgeport.c Change Log comments:
-
- 2003_04_03 al borchers
-  - fixed a bug (that shows up with dosemu) where the tty struct is
-    used in a callback after it has been freed
-
- 2.3 2002_03_08 greg kroah-hartman
-       - fixed bug when multiple devices were attached at the same time.
-
- 2.2 2001_11_14 greg kroah-hartman
-       - fixed bug in edge_close that kept the port from being used more
-         than once.
-       - fixed memory leak on device removal.
-       - fixed potential double free of memory when command urb submitting
-         failed.
-       - other small cleanups when the device is removed
-
- 2.1 2001_07_09 greg kroah-hartman
-       - added support for TIOCMBIS and TIOCMBIC.
-
-     (04/08/2001) gb
-       - Identify version on module load.
-
- 2.0 2001_03_05 greg kroah-hartman
-       - reworked entire driver to fit properly in with the other usb-serial
-         drivers.  Occasional oopses still happen, but it's a good start.
-
- 1.2.3 (02/23/2001) greg kroah-hartman
-       - changed device table to work properly for 2.4.x final format.
-       - fixed problem with dropping data at high data rates.
-
- 1.2.2 (11/27/2000) greg kroah-hartman
-       - cleaned up more NTisms.
-       - Added device table for 2.4.0-test11
-
- 1.2.1 (11/08/2000) greg kroah-hartman
-       - Started to clean up NTisms.
-       - Fixed problem with dev field of urb for kernels >= 2.4.0-test9
-
- 1.2 (10/17/2000) David Iacovelli
-       Remove all EPIC code and GPL source
-  Fix RELEVANT_IFLAG macro to include flow control
-  changes port configuration changes.
-  Fix redefinition of SERIAL_MAGIC
-  Change all timeout values to 5 seconds
-  Tried to fix the UHCI multiple urb submission, but failed miserably.
-  it seems to work fine with OHCI.
-  ( Greg take a look at the #if 0 at end of WriteCmdUsb() we must
-    find a way to work arount this UHCI bug )
-
- 1.1 (10/11/2000) David Iacovelli
-  Fix XON/XOFF flow control to support both IXON and IXOFF
-
- 0.9.27 (06/30/2000) David Iacovelli
-  Added transmit queue and now allocate urb for command writes.
-
- 0.9.26 (06/29/2000) David Iacovelli
-  Add support for 80251 based edgeport
-
- 0.9.25 (06/27/2000) David Iacovelli
-  Do not close the port if it has multiple opens.
-
- 0.9.24 (05/26/2000) David Iacovelli
-  Add IOCTLs to support RXTX and JAVA POS
-  and first cut at running BlackBox Demo
-
- 0.9.23 (05/24/2000) David Iacovelli
-  Add IOCTLs to support RXTX and JAVA POS
-
- 0.9.22 (05/23/2000) David Iacovelli
-  fixed bug in enumeration.  If epconfig turns on mapping by
-  path after a device is already plugged in, we now update
-  the mapping correctly
-
- 0.9.21 (05/16/2000) David Iacovelli
-  Added BlockUntilChaseResp() to also wait for txcredits
-  Updated the way we allocate and handle write URBs
-       Add debug code to dump buffers
-
- 0.9.20 (05/01/2000) David Iacovelli
-       change driver to use usb/tts/
-
- 0.9.19 (05/01/2000) David Iacovelli
-  Update code to compile if DEBUG is off
-
- 0.9.18 (04/28/2000) David Iacovelli
-  cleanup and test tty_register with devfs
-
- 0.9.17 (04/27/2000) greg kroah-hartman
-       changed tty_register around to be like the way it
-       was before, but now it works properly with devfs.
-
- 0.9.16 (04/26/2000) david iacovelli
-  Fixed bug in GetProductInfo()
-
- 0.9.15 (04/25/2000) david iacovelli
-       Updated enumeration
-
- 0.9.14 (04/24/2000) david iacovelli
-  Removed all config/status IOCTLS and
-  converted to using /proc/edgeport
-  still playing with devfs
-
- 0.9.13 (04/24/2000) david iacovelli
-  Removed configuration based on ttyUSB0
-  Added support for configuration using /prod/edgeport
-  first attempt at using devfs (not working yet!)
-  Added IOCTL to GetProductInfo()
-  Added support for custom baud rates
-       Add support for random port numbers
-
- 0.9.12 (04/18/2000) david iacovelli
-       added additional configuration IOCTLs
-  use ttyUSB0 for configuration
-
- 0.9.11 (04/17/2000) greg kroah-hartman
-       fixed module initialization race conditions.
-       made all urbs dynamically allocated.
-       made driver devfs compatible. now it only registers the tty device
-       when the device is actually plugged in.
-
- 0.9.10 (04/13/2000) greg kroah-hartman
-       added proc interface framework.
-
- 0.9.9 (04/13/2000) david iacovelli
-       added enumeration code and ioctls to configure the device
-
- 0.9.8 (04/12/2000) david iacovelli
-  Change interrupt read start when device is plugged in
-  and stop when device is removed
-       process interrupt reads when all ports are closed
-  (keep value of rxBytesAvail consistent with the edgeport)
-  set the USB_BULK_QUEUE flag so that we can shove a bunch
-  of urbs at once down the pipe
-
- 0.9.7 (04/10/2000) david iacovelli
-       start to add enumeration code.
-  generate serial number for epic devices
-  add support for kdb
-
- 0.9.6 (03/30/2000) david iacovelli
-  add IOCTL to get string, manufacture, and boot descriptors
-
- 0.9.5 (03/14/2000) greg kroah-hartman
-       more error checking added to SerialOpen to try to fix UHCI open problem
-
- 0.9.4 (03/09/2000) greg kroah-hartman
-       added more error checking to handle oops when data is hanging
-       around and tty is abruptly closed.
-
- 0.9.3 (03/09/2000) david iacovelli
-       Add epic support for xon/xoff chars
-       play with performance
-
- 0.9.2 (03/08/2000) greg kroah-hartman
-       changed most "info" calls to "dbg"
-       implemented flow control properly in the termios call
-
- 0.9.1 (03/08/2000) david iacovelli
-       added EPIC support
-       enabled bootloader update
-
- 0.9 (03/08/2000) greg kroah-hartman
-       Release to IO networks.
-       Integrated changes that David made
-  made getting urbs for writing SMP safe
-
- 0.8 (03/07/2000) greg kroah-hartman
-       Release to IO networks.
-       Fixed problems that were seen in code by David.
-  Now both Edgeport/4 and Edgeport/2 works properly.
-  Changed most of the functions to use port instead of serial.
-
- 0.7 (02/27/2000) greg kroah-hartman
-       Milestone 3 release.
-       Release to IO Networks
-       ioctl for waiting on line change implemented.
-       ioctl for getting statistics implemented.
-       multiport support working.
-       lsr and msr registers are now handled properly.
-       change break now hooked up and working.
-       support for all known Edgeport devices.
-
- 0.6 (02/22/2000) greg kroah-hartman
-       Release to IO networks.
-       CHASE is implemented correctly when port is closed.
-       SerialOpen now blocks correctly until port is fully opened.
-
- 0.5 (02/20/2000) greg kroah-hartman
-       Release to IO networks.
-       Known problems:
-               modem status register changes are not sent on to the user
-               CHASE is not implemented when the port is closed.
-
- 0.4 (02/16/2000) greg kroah-hartman
-       Second cut at the CeBit demo.
-       Doesn't leak memory on every write to the port
-       Still small leaks on startup.
-       Added support for Edgeport/2 and Edgeport/8
-
- 0.3 (02/15/2000) greg kroah-hartman
-       CeBit demo release.
-       Force the line settings to 4800, 8, 1, e for the demo.
-       Warning! This version leaks memory like crazy!
-
- 0.2 (01/30/2000) greg kroah-hartman
-       Milestone 1 release.
-       Device is found by USB subsystem, enumerated, fimware is downloaded
-       and the descriptors are printed to the debug log, config is set, and
-       green light starts to blink. Open port works, and data can be sent
-       and received at the default settings of the UART. Loopback connector
-       and debug log confirms this.
-
- 0.1 (01/23/2000) greg kroah-hartman
-       Initial release to help IO Networks try to set up their test system.
-       Edgeport4 is recognized, firmware is downloaded, config is set so
-       device blinks green light every 3 sec. Port is bound, but opening,
-       closing, and sending data do not work properly.
-
-

--


-------------------------------------------------------
SF.Net email is sponsored by:
Tame your development challenges with Apache's Geronimo App Server. Download
it for free - -and be entered to win a 42" plasma tv or your very own
Sony(tm)PSP.  Click here to play: http://sourceforge.net/geronimo.php
_______________________________________________
linux-usb-devel@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel

Reply via email to