Hi
Usbatm need code to check correctness of both bulk and isoc
urb. Now urb->status is used howewer it seems uhci driver
set negative urb->status if error occurs on at least one frame,
even if all others are ok. (This is problem for eagle ADSL usb
modems in isoc mode, as modem produce lot frames with
-EILSEQ error mixed with valid packets)
So my question is if urb->actual_length can be used for
check error on both isoc and bulk urbs whitout using
conditionals for distinguish pipes, for example:
if (likely(urb->actual_length > 0)) {
/* we have good bulk urb or at least one good isoc frame */
...
} else
print_error(urb->status);
I think this code will work if:
1) for isoc urb: urb->actual_length is equal sum actual_length of all frames
2) if error occurs on urb/frame - actual_length is equal 0
Is 1) and 2) true?
__
Staszek Gruszka
-------------------------------------------------------
This SF.Net email is sponsored by the JBoss Inc. Get Certified Today
Register for a JBoss Training Course. Free Certification Exam
for All Training Attendees Through End of 2005. For more info visit:
http://ads.osdn.com/?ad_id=7628&alloc_id=16845&op=click
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
