>> I guess the question then are what changed such that it worked
>> on SL10 and it fails now,
>
>Exactly. I have no idea. Can you identify the most recent
>kernel version where it worked okay?
2.6.13 failed
2.6.12 worked, but neither ehci-hcd, nor ohci-hcd loaded and
instead the keyboard interrupts came in over IRQ1 i8042
so I guess there is some sort of emulation at play there?
Unclear why it isn't at play in other releases...
2.6.13-15 from SL10 works out of the box with kbd interrupts
over ehci-hcd with ohci-hcd also loaded.
>That suggests an interesting experiment. Rename both ehci-hcd.ko and
>ohci-hcd.ko so that neither of them is loaded automatically at
>boot-up.
>Then a few minutes after the startup is completed, via a network login,
>manually insmod ehci-hcd.ko and see what happens. As an alternate
>experiment, first manually insmod ohci-hcd.ko and then insmod
>ehci-hcd.ko.
SL10's 2.6.13-15 with ehci-hcd and ohci-hcd compressed came up with
no USB keyboard. uncompressed ehci-hcd and modprobe ehci-hcd
and the keyboard worked. loaded ohci-hcd and it still worked.
did the same but instead loaded only ohci-hcd,
and the keyboard also worked with just that.
modprobe of ehci-hcd caused interrupts to move over
to ehci-hcd from ohci-hcd, and the keyboard still worked.
----
Re: 2.6.15-rc6
Here is the dmesg for the same experiment using 2.6.15-rc6
modprobe of ehci-hcd after boot didn't make the kbd work.
modprobe of ohci-hcd aftet that didn't' fix it either.
so a delay in boot before loading ehci-hcd doesn't seem to help.
[ 0.000000] Bootdata ok (command line is root=/dev/hda4 console=tty0
console=ttyS0,115200n8 debug)
[ 0.000000] Linux version 2.6.15-rc6-gbb44f116 ([EMAIL PROTECTED]) (gcc
version 4.0.2 20050901 (prerelease) (SUSE Linux)) #22 SMP Wed Dec 21 20:21:22
EST 2005
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001ff70000 (usable)
[ 0.000000] BIOS-e820: 000000001ff70000 - 000000001ff7f000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001ff7f000 - 000000001ff80000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] ACPI: RSDP (v000 PTLTD ) @
0x00000000000f7280
[ 0.000000] ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @
0x000000001ff7a87e
[ 0.000000] ACPI: FADT (v001 NVIDIA CK8 0x06040000 PTL_ 0x000f4240) @
0x000000001ff7ee13
[ 0.000000] ACPI: MADT (v001 NVIDIA NV_APIC_ 0x06040000 LTP 0x00000000) @
0x000000001ff7ee87
[ 0.000000] ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @
0x000000001ff7eee1
[ 0.000000] ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @
0x000000001ff7ef09
[ 0.000000] ACPI: DSDT (v001 NVIDIA CK8 0x06040000 MSFT 0x0100000e) @
0x0000000000000000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] Number of nodes 1
[ 0.000000] Node 0 MemBase 0000000000000000 Limit 000000001ff70000
[ 0.000000] Using 63 for the hash shift.
[ 0.000000] Using node hash shift of 63
[ 0.000000] Bootmem setup node 0 0000000000000000-000000001ff70000
[ 0.000000] No mptable found.
[ 0.000000] On node 0 totalpages: 127312
[ 0.000000] DMA zone: 2709 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 124603 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages, LIFO batch:0
[ 0.000000] HighMem zone: 0 pages, LIFO batch:0
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:4 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to physical flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 30000000 (gap:
20000000:dff80000)
[ 0.000000] Checking aperture...
[ 0.000000] CPU 0: aperture @ e8000000 size 128 MB
[ 0.000000] SMP: Allowing 3 CPUs, 2 hotplug CPUs
[ 0.000000] Built 1 zonelists
[ 0.000000] Kernel command line: root=/dev/hda4 console=tty0
console=ttyS0,115200n8 debug
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 65536 bytes)
[ 0.000000] time.c: Using 3.579545 MHz PM timer.
[ 0.000000] time.c: Detected 797.948 MHz processor.
[ 18.941457] Console: colour VGA+ 80x25
[ 19.301848] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 19.310313] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 19.330905] Memory: 508260k/523712k available (2948k kernel code, 15064k
reserved, 1184k data, 216k init)
[ 19.422089] Calibrating delay using timer specific routine.. 1598.12
BogoMIPS (lpj=3196247)
[ 19.431950] Mount-cache hash table entries: 256
[ 19.437746] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 19.445649] CPU: L2 Cache: 1024K (64 bytes/line)
[ 19.450783] CPU 0(1) -> Node 0 -> Core 0
[ 19.455157] mtrr: v2.0 (20020519)
[ 19.459694] tbxface-0109 [02] load_tables : ACPI Tables
successfully acquired
[ 19.488140] Parsing all Control
Methods:.............................................................................................................................................................................................................
[ 19.564912] Table [DSDT](id 0006) - 650 Objects with 66 Devices 205 Methods
24 Regions
[ 19.574202] Parsing all Control Methods:.
[ 19.579110] Table [SSDT](id 0004) - 3 Objects with 0 Devices 1 Methods 0
Regions
[ 19.587570] ACPI Namespace successfully loaded at root ffffffff80554f80
[ 19.615655] evxfevnt-0091 [03] enable : Transition to ACPI
mode successful
[ 19.665254] Using local APIC timer interrupts.
[ 19.795891] Detected 12.467 MHz APIC timer.
[ 19.801109] Brought up 1 CPUs
[ 19.804708] time.c: Using PIT/TSC based timekeeping.
[ 19.810675] testing NMI watchdog ... OK.
[ 19.858640] NET: Registered protocol family 16
[ 19.864125] ACPI: bus type pci registered
[ 19.868966] PCI: Using configuration type 1
[ 19.893691] ACPI: Subsystem revision 20050902
[ 19.903613] evgpeblk-0988 [06] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4
regs on int 0x9
[ 19.913797] evgpeblk-0996 [06] ev_create_gpe_block : Found 5 Wake, Enabled
1 Runtime GPEs in this block
[ 19.926978] evgpeblk-0988 [06] ev_create_gpe_block : GPE 20 to 5F [_GPE] 8
regs on int 0x9
[ 19.937157] evgpeblk-0996 [06] ev_create_gpe_block : Found 0 Wake, Enabled
1 Runtime GPEs in this block
[ 19.951402] Completing Region/Field/Buffer/Package
initialization:.....................................................................
[ 19.980515] Initialized 24/24 Regions 2/2 Fields 29/29 Buffers 14/21
Packages (662 nodes)
[ 19.990574] Executing all Device _STA and_INI
methods:......................................................................
[ 20.140198] 70 Devices found containing: 70 _STA, 1 _INI methods
[ 20.147945] ACPI: Interpreter enabled
[ 20.152367] ACPI: Using IOAPIC for interrupt routing
[ 20.163565] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 20.169356] PCI: Probing PCI hardware (bus 00)
[ 20.310166] Boot video device is 0000:01:00.0
[ 20.315616] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 20.503888] ACPI: Embedded Controller [EC0] (gpe 33)
[ 20.578345] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
[ 20.588524] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP0._PRT]
[ 20.596138] Losing some ticks... checking if CPU frequency changed.
[ 20.610201] ACPI: PCI Interrupt Link [LNK1] (IRQs 16 18 19) *0
[ 20.620311] ACPI: PCI Interrupt Link [LNK2] (IRQs 16 18 19) *0
[ 20.630440] ACPI: PCI Interrupt Link [LNK3] (IRQs 17) *0
[ 20.644527] ACPI: PCI Interrupt Link [LNK4] (IRQs 16 18 19) *0, disabled.
[ 20.655816] ACPI: PCI Interrupt Link [LNK5] (IRQs 16 18 19) *0
[ 20.665896] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22) *0
[ 20.675964] ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *0
[ 20.686058] ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *0
[ 20.696127] ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *0
[ 20.706188] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22) *0, disabled.
[ 20.717413] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22) *0
[ 20.727491] ACPI: PCI Interrupt Link [LMCI] (IRQs 20 21 22) *0
[ 20.737606] ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22) *0, disabled.
[ 20.748920] ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *0, disabled.
[ 20.758488] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 20.765336] pnp: PnP ACPI init
[ 20.769963] pnp: ACPI device : hid PNP0C02
[ 20.779677] pnp: ACPI device : hid PNP0C01
[ 20.808814] pnp: ACPI device : hid PNP0C02
[ 20.814175] pnp: ACPI device : hid PNP0200
[ 20.819469] pnp: ACPI device : hid PNP0800
[ 20.824750] pnp: ACPI device : hid PNP0B00
[ 20.830048] pnp: ACPI device : hid PNP0C04
[ 20.835567] pnp: ACPI device : hid PNP0303
[ 20.841032] pnp: ACPI device : hid PNP0F13
[ 20.846311] pnp: ACPI device : hid PNP0A05
[ 20.852622] pnp: ACPI device : hid PNP0700
[ 20.860231] pnp: ACPI device : hid PNP0501
[ 20.873780] pnp: ACPI device : hid PNP0401
[ 20.887273] pnp: PnP ACPI: found 13 devices
[ 20.895187] SCSI subsystem initialized
[ 20.900012] PCI: Using ACPI for IRQ routing
[ 20.905039] PCI: If a device doesn't work, try "pci=routeirq". If it helps,
post a report
[ 20.915287] agpgart: Detected AGP bridge 0
[ 20.920242] agpgart: Setting up Nforce3 AGP.
[ 20.933174] agpgart: AGP aperture is 128M @ 0xe8000000
[ 20.939412] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 20.952433] pnp: the driver 'system' has been registered
[ 20.959013] pnp: match found with the PnP device '00:00' and the driver
'system'
[ 20.967885] pnp: 00:00: ioport range 0x8000-0x807f could not be reserved
[ 20.975932] pnp: 00:00: ioport range 0x8080-0x80ff has been reserved
[ 20.983553] pnp: 00:00: ioport range 0x8400-0x847f has been reserved
[ 20.991188] pnp: 00:00: ioport range 0x8480-0x84ff could not be reserved
[ 20.999229] pnp: 00:00: ioport range 0x8800-0x887f has been reserved
[ 21.006870] pnp: 00:00: ioport range 0x8880-0x88ff has been reserved
[ 21.014495] pnp: 00:00: ioport range 0x2040-0x207f has been reserved
[ 21.022103] pnp: 00:00: ioport range 0x2000-0x203f has been reserved
[ 21.029736] pnp: match found with the PnP device '00:01' and the driver
'system'
[ 21.038612] pnp: match found with the PnP device '00:02' and the driver
'system'
[ 21.049295] PCI: Failed to allocate mem resource #10:[EMAIL PROTECTED] for
0000:02:04.0
[ 21.058796] PCI: Failed to allocate mem resource #10:[EMAIL PROTECTED] for
0000:02:04.1
[ 21.068340] PCI: Bus 3, cardbus bridge: 0000:02:04.0
[ 21.074294] IO window: 00003000-000030ff
[ 21.079216] IO window: 00003400-000034ff
[ 21.084146] PREFETCH window: 30000000-31ffffff
[ 21.089692] PCI: Bus 7, cardbus bridge: 0000:02:04.1
[ 21.095664] IO window: 00003800-000038ff
[ 21.100618] IO window: 00003c00-00003cff
[ 21.105566] PREFETCH window: 32000000-33ffffff
[ 21.111103] PCI: Bridge: 0000:00:0a.0
[ 21.115502] IO window: 3000-7fff
[ 21.119593] MEM window: e0100000-e17fffff
[ 21.124620] PREFETCH window: 30000000-33ffffff
[ 21.130160] PCI: Bridge: 0000:00:0b.0
[ 21.134571] IO window: disabled.
[ 21.138683] MEM window: e2000000-e2ffffff
[ 21.143717] PREFETCH window: f0000000-f80fffff
[ 21.149281] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[ 21.159419] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 19
[ 21.166333] GSI 16 sharing vector 0xB1 and IRQ 16
[ 21.171975] ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNK1] -> GSI 19
(level, low) -> IRQ 177
[ 21.185143] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 18
[ 21.192037] GSI 17 sharing vector 0xB9 and IRQ 17
[ 21.197682] ACPI: PCI Interrupt 0000:02:04.1[B] -> Link [LNK2] -> GSI 18
(level, low) -> IRQ 185
[ 21.209006] Simple Boot Flag at 0x37 set to 0x1
[ 21.215660] IA-32 Microcode Update Driver: v1.14 <[EMAIL PROTECTED]>
[ 21.224004] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp
$
[ 21.243249] Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
[ 21.252680] io scheduler noop registered
[ 21.257498] io scheduler anticipatory registered
[ 21.263155] io scheduler deadline registered
[ 21.268434] io scheduler cfq registered
[ 21.704678] ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 16
[ 21.711603] GSI 18 sharing vector 0xC1 and IRQ 18
[ 21.717269] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNK5] -> GSI 16
(level, low) -> IRQ 193
[ 21.727895] nvidiafb: nVidia device/chipset 10DE0179
[ 21.752453] nvidiafb: CRTC0 analog not found
[ 21.772447] nvidiafb: CRTC1 analog not found
[ 21.905805] nvidiafb: CRTC 1 is currently programmed for DFP
[ 21.912612] nvidiafb: Using DFP on CRTC 1
[ 21.917430] Panel size is 1280 x 800
[ 21.922334] nvidiafb: MTRR set to ON
[ 21.926689] fbcvt: [EMAIL PROTECTED]: CVT Name - 1.024MA-R
[ 21.933172] nvidiafb: PCI nVidia NV17 framebuffer (64MB @ 0xF0000000)
[ 21.942921] ACPI: AC Adapter [ACAD] (on-line)
[ 22.067962] ACPI: Battery Slot [BAT1] (battery present)
[ 22.074287] ACPI: Power Button (FF) [PWRF]
[ 22.079223] ACPI: Power Button (CM) [PWRB]
[ 22.084169] ACPI: Lid Switch [LID]
[ 22.092647] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 22.103347] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 22.168239] acpi_thermal-0417 [24] thermal_get_trip_point: Invalid active
threshold [0]
[ 22.182712] ACPI: Thermal Zone [THRM] (42 C)
[ 22.188051] ibm_acpi: ec object not found
[ 22.307163] Real Time Clock Driver v1.12
[ 22.312219] Linux agpgart interface v0.101 (c) Dave Jones
[ 22.319034] pnp: the driver 'i8042 kbd' has been registered
[ 22.326003] pnp: match found with the PnP device '00:07' and the driver
'i8042 kbd'
[ 22.335233] pnp: the driver 'i8042 aux' has been registered
[ 22.342112] pnp: match found with the PnP device '00:08' and the driver
'i8042 aux'
[ 22.351339] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64
irq 1,12
[ 22.368924] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 22.383370] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 22.389781] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 22.396193] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 22.402597] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 22.410077] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 22.416040] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
disabled
[ 22.426165] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 22.435297] pnp: the driver 'serial' has been registered
[ 22.441960] pnp: match found with the PnP device '00:0b' and the driver
'serial'
[ 22.451184] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 22.458378] acpi_bus-0201 [19] bus_set_power : Device is not power
manageable
[ 22.470508] ACPI: PCI Interrupt Link [LMCI] enabled at IRQ 22
[ 22.477420] GSI 19 sharing vector 0xC9 and IRQ 19
[ 22.483082] ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [LMCI] -> GSI 22
(level, low) -> IRQ 201
[ 22.493717] ACPI: PCI interrupt for device 0000:00:06.1 disabled
[ 25.513013] floppy0: no floppy controllers found
[ 25.521930] RAMDISK driver initialized: 16 RAM disks of 4096K size 1024
blocksize
[ 25.532632] loop: loaded (max 8 devices)
[ 25.537357] Intel(R) PRO/1000 Network Driver - version 6.1.16-k2
[ 25.544607] Copyright (c) 1999-2005 Intel Corporation.
[ 25.551664] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 25.559313] ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
[ 25.569015] NFORCE3-150: IDE controller at PCI slot 0000:00:08.0
[ 25.576226] acpi_bus-0201 [19] bus_set_power : Device is not power
manageable
[ 25.585734] NFORCE3-150: chipset revision 165
[ 25.590980] NFORCE3-150: not 100% native mode: will probe irqs later
[ 25.598610] NFORCE3-150: BIOS didn't set cable bits correctly. Enabling
workaround.
[ 25.607811] NFORCE3-150: 0000:00:08.0 (rev a5) UDMA133 controller
[ 25.615131] ide0: BM-DMA at 0x2080-0x2087, BIOS settings: hda:DMA,
hdb:pio
[ 25.623894] ide1: BM-DMA at 0x2088-0x208f, BIOS settings: hdc:DMA,
hdd:pio
[ 25.632665] Probing IDE interface ide0...
[ 25.925024] hda: HTE726040M9AT00, ATA DISK drive
[ 26.601620] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 26.607388] Probing IDE interface ide1...
[ 27.348768] hdc: HL-DT-STCD-RW/DVD DRIVE GCC-4241N, ATAPI CD/DVD-ROM drive
[ 27.694964] ide1 at 0x170-0x177,0x376 on irq 15
[ 27.701692] hda: max request size: 1024KiB
[ 27.712760] hda: 78140160 sectors (40007 MB) w/7877KiB Cache,
CHS=16383/255/63, UDMA(100)
[ 27.723035] hda: cache flushes supported
[ 27.728078] hda: hda1 hda2 hda3 hda4
[ 27.745559] hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, DMA
[ 27.753322] Uniform CD-ROM driver Revision: 3.20
[ 27.769960] megaraid cmm: 2.20.2.6 (Release Date: Mon Mar 7 00:01:03 EST
2005)
[ 27.778649] megaraid: 2.20.4.6 (Release Date: Mon Mar 07 12:27:22 EST 2005)
[ 27.787283] libata version 1.20 loaded.
[ 27.797473] ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNK1] -> GSI 19
(level, low) -> IRQ 177
[ 27.808122] Yenta: CardBus bridge found at 0000:02:04.0 [103c:006d]
[ 27.815667] PCI: Bus 3, cardbus bridge: 0000:02:04.0
[ 27.821636] IO window: 00003000-000030ff
[ 27.826566] IO window: 00003400-000034ff
[ 27.831496] PREFETCH window: 30000000-31ffffff
[ 27.837043] MEM window: e0400000-e07fffff
[ 27.842084] Yenta: Enabling burst memory read transactions
[ 27.848671] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 27.855680] Yenta: Routing CardBus interrupts to PCI
[ 27.861654] Yenta TI: socket 0000:02:04.0, mfunc 0x01111d22, devctl 0x64
[ 28.101301] Yenta: ISA IRQ mask 0x0ce8, PCI irq 177
[ 28.107165] Socket status: 30000086
[ 28.111377] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x7fff
[ 28.118687] pcmcia: parent PCI bridge Memory window: 0xe0100000 - 0xe17fffff
[ 28.127135] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
[ 28.388535] ACPI: PCI Interrupt 0000:02:04.1[B] -> Link [LNK2] -> GSI 18
(level, low) -> IRQ 185
[ 28.399161] Yenta: CardBus bridge found at 0000:02:04.1 [103c:006d]
[ 28.406700] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 28.413701] Yenta: Routing CardBus interrupts to PCI
[ 28.419673] Yenta TI: socket 0000:02:04.1, mfunc 0x01111d22, devctl 0x64
[ 28.657195] Yenta: ISA IRQ mask 0x0ce8, PCI irq 185
[ 28.663063] Socket status: 30000006
[ 28.667267] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x7fff
[ 28.674577] pcmcia: parent PCI bridge Memory window: 0xe0100000 - 0xe17fffff
[ 28.683042] pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
[ 28.944802] mice: PS/2 mouse device common for all mice
[ 28.951288] NET: Registered protocol family 2
[ 28.996633] IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 29.005842] TCP established hash table entries: 16384 (order: 7, 524288
bytes)
[ 29.015772] TCP bind hash table entries: 16384 (order: 7, 524288 bytes)
[ 29.024913] TCP: Hash tables configured (established 16384 bind 16384)
[ 29.032751] TCP reno registered
[ 29.036806] TCP bic registered
[ 29.040557] NET: Registered protocol family 1
[ 29.046004] NET: Registered protocol family 10
[ 29.052283] IPv6 over IPv4 tunneling driver
[ 29.057730] NET: Registered protocol family 17
[ 29.063969] input: AT Translated Set 2 keyboard as /class/input/input0
[ 29.075060] ACPI wakeup devices:
[ 29.079077] USB0 USB1 USB2 PS2K PS2M UAR1 MAC0
[ 29.084762] ACPI: (supports S0 S3 S4 S5)
[ 29.099492] ReiserFS: hda4: found reiserfs format "3.6" with standard journal
[ 29.445488] input: PS/2 Mouse as /class/input/input1
[ 29.476734] input: AlpsPS/2 ALPS GlidePoint as /class/input/input2
[ 30.390180] ReiserFS: hda4: using ordered data mode
[ 30.417851] ReiserFS: hda4: journal params: device hda4, size 8192, journal
first block 18, max trans len 1024, max batch 900, max commit age 30, max trans
age 30
[ 30.438447] ReiserFS: hda4: checking transaction log (hda4)
[ 30.504302] ReiserFS: hda4: Using r5 hash to sort names
[ 30.510732] VFS: Mounted root (reiserfs filesystem) readonly.
[ 30.518059] Freeing unused kernel memory: 216k freed
[ 37.546972] Adding 1052248k swap on /dev/hda3. Priority:-1 extents:1
across:1052248k
[ 37.652946] lp: driver loaded but no devices found
[ 38.143806] ip_tables: (C) 2000-2002 Netfilter core team
[ 39.099711] i2c_adapter i2c-3: nForce2 SMBus adapter at 0x2040
[ 39.106854] i2c_adapter i2c-4: nForce2 SMBus adapter at 0x2000
[ 39.286058] cdrom: open failed.
[ 40.238483] acpi_bus-0201 [19] bus_set_power : Device is not power
manageable
[ 40.250671] ACPI: PCI Interrupt Link [LACI] enabled at IRQ 21
[ 40.257587] GSI 20 sharing vector 0xD1 and IRQ 20
[ 40.263246] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LACI] -> GSI 21
(level, low) -> IRQ 209
[ 40.274297] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 40.843929] intel8x0_measure_ac97_clock: measured 54983 usecs
[ 40.850854] intel8x0: clocking to 48000
[ 41.611072] ohci1394: $Rev: 1313 $ Ben Collins <[EMAIL PROTECTED]>
[ 41.618733] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNK1] -> GSI 19
(level, low) -> IRQ 177
[ 41.680369] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[177]
MMIO=[e0108000-e01087ff] Max Packet=[2048]
[ 41.738922] 8139too Fast Ethernet driver 0.9.27
[ 41.744524] acpi_bus-0201 [19] bus_set_power : Device is not power
manageable
[ 41.754087] ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNK2] -> GSI 18
(level, low) -> IRQ 185
[ 41.765298] eth0: RealTek RTL8139 at 0x7000, 00:0f:b0:0b:bc:36, IRQ 185
[ 41.773251] eth0: Identified 8139 chip type 'RTL-8101'
[ 42.525424] usbcore: registered new driver usbfs
[ 42.531117] usbcore: registered new driver hub
[ 42.962467] ieee1394: Host added: ID:BUS[0-00:1023] GUID[493f0200493f0200]
[ 46.850841] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 50.228164] microcode: CPU0 not a capable Intel processor
[ 50.234768] microcode: No new microcode data for CPU0
[ 51.461213] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version
1.50.4)
[ 51.472256] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x2 (1500 mV)
[ 51.479828] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0xa (1300 mV)
[ 51.487398] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x12 (1100 mV)
[ 51.494976] cpu_init done, current fid 0x0, vid 0x12
[ 62.226595] eth0: no IPv6 routers present
# modprobe ehci-hcd
[ 111.273725] ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96
[ 111.273859] acpi_bus-0201 [92] bus_set_power : Device is not power
manageable
[ 111.276579] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 20
[ 111.276592] GSI 21 sharing vector 0xD9 and IRQ 21
[ 111.276602] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [LUS2] -> GSI 20
(level, low) -> IRQ 217
[ 111.276941] PCI: Setting latency timer of device 0000:00:02.2 to 64
[ 111.276953] ehci_hcd 0000:00:02.2: EHCI Host Controller
[ 111.276964] ehci_hcd 0000:00:02.2: reset hcs_params 0x102486 dbg=1 cc=2
pcc=4 !ppc ports=6
[ 111.276977] ehci_hcd 0000:00:02.2: reset portroute 0 0 1 1 1 0
[ 111.276985] ehci_hcd 0000:00:02.2: reset hcc_params a086 caching frame
256/512/1024 park
[ 111.277141] ehci_hcd 0000:00:02.2: park 0
[ 111.277157] ehci_hcd 0000:00:02.2: capability 0001 at a0
[ 111.277166] PCI: cache line size of 64 is not supported by device
0000:00:02.2
[ 111.280298] drivers/usb/core/inode.c: creating file 'devices'
[ 111.280327] drivers/usb/core/inode.c: creating file '001'
[ 111.280346] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus
number 1
[ 111.280375] ehci_hcd 0000:00:02.2: irq 217, io mem 0xe0004000
[ 111.280408] ehci_hcd 0000:00:02.2: reset command 080b02 park=3 ithresh=8
period=1024 Reset HALT
[ 111.280420] ehci_hcd 0000:00:02.2: init command 010009 (park)=0 ithresh=1
period=256 RUN
[ 111.280429] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 111.280504] usb usb1: default language 0x0409
[ 111.280548] usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
[ 111.280554] usb usb1: Product: EHCI Host Controller
[ 111.280559] usb usb1: Manufacturer: Linux 2.6.15-rc6-gbb44f116 ehci_hcd
[ 111.280565] usb usb1: SerialNumber: 0000:00:02.2
[ 111.280605] usb usb1: hotplug
[ 111.280768] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 111.280808] usb 1-0:1.0: hotplug
[ 111.280880] hub 1-0:1.0: usb_probe_interface
[ 111.280885] hub 1-0:1.0: usb_probe_interface - got id
[ 111.280891] hub 1-0:1.0: USB hub found
[ 111.280920] hub 1-0:1.0: 6 ports detected
[ 111.280925] hub 1-0:1.0: standalone hub
[ 111.280930] hub 1-0:1.0: no power switching (usb 1.0)
[ 111.280936] hub 1-0:1.0: individual port over-current protection
[ 111.280941] hub 1-0:1.0: Single TT
[ 111.280947] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
[ 111.280954] hub 1-0:1.0: power on to power good time: 20ms
[ 111.280975] hub 1-0:1.0: local power source is good
[ 111.386026] drivers/usb/core/inode.c: creating file '001'
[ 111.386112] hub 1-0:1.0: state 5 ports 6 chg 0000 evt 0000
[ 111.386167] ehci_hcd 0000:00:02.2: GetStatus port 5 status 001803 POWER
sig=j CSC CONNECT
[ 111.386187] hub 1-0:1.0: port 5, status 0501, change 0001, 480 Mb/s
[ 111.515305] hub 1-0:1.0: debounce: port 5: total 100ms stable 100ms status
0x501
[ 111.570029] ehci_hcd 0000:00:02.2: port 5 high speed
[ 111.570045] ehci_hcd 0000:00:02.2: GetStatus port 5 status 001005 POWER
sig=se0 PE CONNECT
[ 111.625799] usb 1-5: new high speed USB device using ehci_hcd and address 2
[ 112.625747] usb 1-5: khubd timed out on ep0in len=0/64
[ 113.625507] usb 1-5: khubd timed out on ep0in len=0/64
[ 114.625276] usb 1-5: khubd timed out on ep0in len=0/64
[ 114.681480] ehci_hcd 0000:00:02.2: port 5 high speed
[ 114.681493] ehci_hcd 0000:00:02.2: GetStatus port 5 status 001005 POWER
sig=se0 PE CONNECT
[ 114.737242] usb 1-5: device descriptor read/64, error -110
[ 119.836428] usb 1-5: khubd timed out on ep0in len=0/64
[ 124.835501] usb 1-5: khubd timed out on ep0in len=0/64
[ 129.834574] usb 1-5: khubd timed out on ep0in len=0/64
[ 129.890773] ehci_hcd 0000:00:02.2: port 5 high speed
[ 129.890787] ehci_hcd 0000:00:02.2: GetStatus port 5 status 001005 POWER
sig=se0 PE CONNECT
[ 129.946530] usb 1-5: device descriptor read/64, error -110
[ 130.106719] ehci_hcd 0000:00:02.2: port 5 high speed
[ 130.106731] ehci_hcd 0000:00:02.2: GetStatus port 5 status 001005 POWER
sig=se0 PE CONNECT
[ 130.162491] usb 1-5: new high speed USB device using ehci_hcd and address 3
[ 131.162384] usb 1-5: khubd timed out on ep0in len=0/64
[ 132.162266] usb 1-5: khubd timed out on ep0in len=0/64
[ 133.162030] usb 1-5: khubd timed out on ep0in len=0/64
[ 133.218189] ehci_hcd 0000:00:02.2: port 5 high speed
[ 133.218201] ehci_hcd 0000:00:02.2: GetStatus port 5 status 001005 POWER
sig=se0 PE CONNECT
[ 133.273937] usb 1-5: device descriptor read/64, error -110
[ 138.377060] usb 1-5: khubd timed out on ep0in len=0/64
[ 143.376259] usb 1-5: khubd timed out on ep0in len=0/64
[ 148.375330] usb 1-5: khubd timed out on ep0in len=0/64
[ 148.431481] ehci_hcd 0000:00:02.2: port 5 high speed
[ 148.431494] ehci_hcd 0000:00:02.2: GetStatus port 5 status 001005 POWER
sig=se0 PE CONNECT
[ 148.487224] usb 1-5: device descriptor read/64, error -110
[ 148.647405] ehci_hcd 0000:00:02.2: port 5 high speed
[ 148.647417] ehci_hcd 0000:00:02.2: GetStatus port 5 status 001005 POWER
sig=se0 PE CONNECT
[ 148.703186] usb 1-5: new high speed USB device using ehci_hcd and address 4
[ 153.702327] usb 1-5: khubd timed out on ep0out len=0/0
[ 158.905479] usb 1-5: khubd timed out on ep0out len=0/0
[ 159.109318] usb 1-5: device not accepting address 4, error -110
[ 159.165553] ehci_hcd 0000:00:02.2: port 5 high speed
[ 159.165567] ehci_hcd 0000:00:02.2: GetStatus port 5 status 001005 POWER
sig=se0 PE CONNECT
[ 159.221309] usb 1-5: new high speed USB device using ehci_hcd and address 5
[ 164.220474] usb 1-5: khubd timed out on ep0out len=0/0
[ 169.423626] usb 1-5: khubd timed out on ep0out len=0/0
[ 169.627442] usb 1-5: device not accepting address 5, error -110
[ 169.863411] hub 1-0:1.0: state 5 ports 6 chg 0000 evt 0020
[ 169.863431] ehci_hcd 0000:00:02.2: GetStatus port 5 status 001803 POWER
sig=j CSC CONNECT
[ 169.863451] hub 1-0:1.0: port 5, status 0501, change 0001, 480 Mb/s
[ 169.991387] hub 1-0:1.0: debounce: port 5: total 100ms stable 100ms status
0x501
[ 170.047613] ehci_hcd 0000:00:02.2: port 5 high speed
[ 170.047624] ehci_hcd 0000:00:02.2: GetStatus port 5 status 001005 POWER
sig=se0 PE CONNECT
[ 170.103367] usb 1-5: new high speed USB device using ehci_hcd and address 6
[ 171.103226] usb 1-5: khubd timed out on ep0in len=0/64
[ 172.103110] usb 1-5: khubd timed out on ep0in len=0/64
[ 173.102874] usb 1-5: khubd timed out on ep0in len=0/64
[ 173.159033] ehci_hcd 0000:00:02.2: port 5 high speed
[ 173.159045] ehci_hcd 0000:00:02.2: GetStatus port 5 status 001005 POWER
sig=se0 PE CONNECT
[ 173.214813] usb 1-5: device descriptor read/64, error -110
[ 178.318030] usb 1-5: khubd timed out on ep0in len=0/64
[ 183.317101] usb 1-5: khubd timed out on ep0in len=0/64
[ 188.316171] usb 1-5: khubd timed out on ep0in len=0/64
[ 188.372324] ehci_hcd 0000:00:02.2: port 5 high speed
[ 188.372338] ehci_hcd 0000:00:02.2: GetStatus port 5 status 001005 POWER
sig=se0 PE CONNECT
[ 188.429687] usb 1-5: device descriptor read/64, error -110
[ 188.588071] ehci_hcd 0000:00:02.2: GetStatus port 5 status 001802 POWER
sig=j CSC
[ 188.764040] hub 1-0:1.0: state 5 ports 6 chg 0000 evt 0020
[ 188.764059] ehci_hcd 0000:00:02.2: GetStatus port 5 status 001803 POWER
sig=j CSC CONNECT
[ 188.764079] hub 1-0:1.0: port 5, status 0501, change 0001, 480 Mb/s
[ 188.892015] hub 1-0:1.0: debounce: port 5: total 100ms stable 100ms status
0x501
[ 188.948237] ehci_hcd 0000:00:02.2: port 5 high speed
[ 188.948248] ehci_hcd 0000:00:02.2: GetStatus port 5 status 001005 POWER
sig=se0 PE CONNECT
[ 189.003997] usb 1-5: new high speed USB device using ehci_hcd and address 8
[ 190.003898] usb 1-5: khubd timed out on ep0in len=0/64
[ 191.003663] usb 1-5: khubd timed out on ep0in len=0/64
[ 192.003549] usb 1-5: khubd timed out on ep0in len=0/64
[ 192.059656] ehci_hcd 0000:00:02.2: port 5 high speed
[ 192.059669] ehci_hcd 0000:00:02.2: GetStatus port 5 status 001005 POWER
sig=se0 PE CONNECT
[ 192.115442] usb 1-5: device descriptor read/64, error -110
[ 197.218577] usb 1-5: khubd timed out on ep0in len=0/64
[ 202.217772] usb 1-5: khubd timed out on ep0in len=0/64
# modprobe ohci-hcd
[ 204.805383] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI)
Driver (PCI)
[ 204.805396] ohci_hcd: block sizes: ed 80 td 96
[ 204.805516] acpi_bus-0201 [160] bus_set_power : Device is not power
manageable
[ 204.808170] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22
[ 204.808180] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 22
(level, low) -> IRQ 201
[ 204.808524] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 204.808536] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 204.808710] drivers/usb/core/inode.c: creating file '002'
[ 204.808732] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus
number 2
[ 204.808761] ohci_hcd 0000:00:02.0: irq 201, io mem 0xe0000000
[ 204.808805] ohci_hcd 0000:00:02.0: resetting from state 'reset', control =
0x600
[ 204.863169] ohci_hcd 0000:00:02.0: OHCI controller state
[ 204.863182] ohci_hcd 0000:00:02.0: OHCI 1.0, NO legacy support registers
[ 204.863191] ohci_hcd 0000:00:02.0: control 0x683 RWE RWC HCFS=operational
CBSR=3
[ 204.863200] ohci_hcd 0000:00:02.0: cmdstatus 0x00000 SOC=0
[ 204.863208] ohci_hcd 0000:00:02.0: intrstatus 0x00000004 SF
[ 204.863216] ohci_hcd 0000:00:02.0: intrenable 0x8000000a MIE RD WDH
[ 204.863224] ohci_hcd 0000:00:02.0: hcca frame #0003
[ 204.863233] ohci_hcd 0000:00:02.0: roothub.a 01000203 POTPGT=1 NPS NDP=3(3)
[ 204.863241] ohci_hcd 0000:00:02.0: roothub.b 00000000 PPCM=0000 DR=0000
[ 204.863249] ohci_hcd 0000:00:02.0: roothub.status 00008000 DRWE
[ 204.863259] ohci_hcd 0000:00:02.0: roothub.portstatus [0] 0x00000100 PPS
[ 204.863267] ohci_hcd 0000:00:02.0: roothub.portstatus [1] 0x00000100 PPS
[ 204.863276] ohci_hcd 0000:00:02.0: roothub.portstatus [2] 0x00000100 PPS
[ 204.863288] ohci_hcd 0000:00:02.0: created debug files
[ 204.863295] ohci_hcd 0000:00:02.0: supports USB remote wakeup
[ 204.863366] usb usb2: default language 0x0409
[ 204.863411] usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
[ 204.863417] usb usb2: Product: OHCI Host Controller
[ 204.863423] usb usb2: Manufacturer: Linux 2.6.15-rc6-gbb44f116 ohci_hcd
[ 204.863429] usb usb2: SerialNumber: 0000:00:02.0
[ 204.863476] usb usb2: hotplug
[ 204.863660] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 204.863695] usb 2-0:1.0: hotplug
[ 204.863782] hub 2-0:1.0: usb_probe_interface
[ 204.863788] hub 2-0:1.0: usb_probe_interface - got id
[ 204.863794] hub 2-0:1.0: USB hub found
[ 204.863829] hub 2-0:1.0: 3 ports detected
[ 204.863834] hub 2-0:1.0: standalone hub
[ 204.863839] hub 2-0:1.0: no power switching (usb 1.0)
[ 204.863844] hub 2-0:1.0: global over-current protection
[ 204.863851] hub 2-0:1.0: power on to power good time: 2ms
[ 204.863873] hub 2-0:1.0: local power source is good
[ 204.863879] hub 2-0:1.0: no over-current condition exists
[ 204.965329] drivers/usb/core/inode.c: creating file '001'
[ 204.965388] acpi_bus-0201 [160] bus_set_power : Device is not power
manageable
[ 204.968042] ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 21
[ 204.968051] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS1] -> GSI 21
(level, low) -> IRQ 209
[ 204.968445] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 204.968456] ohci_hcd 0000:00:02.1: OHCI Host Controller
[ 204.968632] drivers/usb/core/inode.c: creating file '003'
[ 204.968660] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus
number 3
[ 204.968679] ohci_hcd 0000:00:02.1: irq 209, io mem 0xe0001000
[ 204.968708] ohci_hcd 0000:00:02.1: resetting from state 'reset', control =
0x600
[ 205.031492] ohci_hcd 0000:00:02.1: OHCI controller state
[ 205.031506] ohci_hcd 0000:00:02.1: OHCI 1.0, NO legacy support registers
[ 205.031516] ohci_hcd 0000:00:02.1: control 0x683 RWE RWC HCFS=operational
CBSR=3
[ 205.031525] ohci_hcd 0000:00:02.1: cmdstatus 0x00000 SOC=0
[ 205.031533] ohci_hcd 0000:00:02.1: intrstatus 0x00000004 SF
[ 205.031541] ohci_hcd 0000:00:02.1: intrenable 0x8000000a MIE RD WDH
[ 205.031549] ohci_hcd 0000:00:02.1: hcca frame #0003
[ 205.031558] ohci_hcd 0000:00:02.1: roothub.a 01000203 POTPGT=1 NPS NDP=3(3)
[ 205.031566] ohci_hcd 0000:00:02.1: roothub.b 00000000 PPCM=0000 DR=0000
[ 205.031574] ohci_hcd 0000:00:02.1: roothub.status 00008000 DRWE
[ 205.031583] ohci_hcd 0000:00:02.1: roothub.portstatus [0] 0x00000100 PPS
[ 205.031592] ohci_hcd 0000:00:02.1: roothub.portstatus [1] 0x00000100 PPS
[ 205.031600] ohci_hcd 0000:00:02.1: roothub.portstatus [2] 0x00000100 PPS
[ 205.031614] ohci_hcd 0000:00:02.1: created debug files
[ 205.031620] ohci_hcd 0000:00:02.1: supports USB remote wakeup
[ 205.031695] usb usb3: default language 0x0409
[ 205.031744] usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
[ 205.031750] usb usb3: Product: OHCI Host Controller
[ 205.031756] usb usb3: Manufacturer: Linux 2.6.15-rc6-gbb44f116 ohci_hcd
[ 205.031761] usb usb3: SerialNumber: 0000:00:02.1
[ 205.031816] usb usb3: hotplug
[ 205.031987] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 205.032022] usb 3-0:1.0: hotplug
[ 205.032095] hub 3-0:1.0: usb_probe_interface
[ 205.032100] hub 3-0:1.0: usb_probe_interface - got id
[ 205.032106] hub 3-0:1.0: USB hub found
[ 205.032144] hub 3-0:1.0: 3 ports detected
[ 205.032149] hub 3-0:1.0: standalone hub
[ 205.032154] hub 3-0:1.0: no power switching (usb 1.0)
[ 205.032159] hub 3-0:1.0: global over-current protection
[ 205.032166] hub 3-0:1.0: power on to power good time: 2ms
[ 205.032188] hub 3-0:1.0: local power source is good
[ 205.032193] hub 3-0:1.0: no over-current condition exists
[ 205.200562] drivers/usb/core/inode.c: creating file '001'
[ 205.220691] ohci_hcd 0000:00:02.0: suspend root hub
[ 205.449057] ohci_hcd 0000:00:02.1: suspend root hub
[ 207.216848] usb 1-5: khubd timed out on ep0in len=0/64
[ 207.272949] ehci_hcd 0000:00:02.2: port 5 high speed
[ 207.272962] ehci_hcd 0000:00:02.2: GetStatus port 5 status 001005 POWER
sig=se0 PE CONNECT
[ 207.328729] usb 1-5: device descriptor read/64, error -110
[ 207.492941] ehci_hcd 0000:00:02.2: port 5 high speed
[ 207.492954] ehci_hcd 0000:00:02.2: GetStatus port 5 status 001005 POWER
sig=se0 PE CONNECT
[ 207.548689] usb 1-5: new high speed USB device using ehci_hcd and address 9
[ 208.548531] usb 1-5: khubd timed out on ep0in len=0/64
[ 209.548418] usb 1-5: khubd timed out on ep0in len=0/64
[ 210.548181] usb 1-5: khubd timed out on ep0in len=0/64
[ 210.604389] ehci_hcd 0000:00:02.2: port 5 high speed
[ 210.604401] ehci_hcd 0000:00:02.2: GetStatus port 5 status 001005 POWER
sig=se0 PE CONNECT
[ 210.660134] usb 1-5: device descriptor read/64, error -110
[ 215.763340] usb 1-5: khubd timed out on ep0in len=0/64
[ 220.762405] usb 1-5: khubd timed out on ep0in len=0/64
[ 225.761479] usb 1-5: khubd timed out on ep0in len=0/64
[ 225.817632] ehci_hcd 0000:00:02.2: port 5 high speed
[ 225.817645] ehci_hcd 0000:00:02.2: GetStatus port 5 status 001005 POWER
sig=se0 PE CONNECT
[ 225.873424] usb 1-5: device descriptor read/64, error -110
[ 226.033392] ehci_hcd 0000:00:02.2: GetStatus port 5 status 001802 POWER
sig=j CSC
[ 226.033435] hub 2-0:1.0: state 5 ports 3 chg 0000 evt 0000
[ 226.033444] hub 3-0:1.0: state 5 ports 3 chg 0000 evt 0000
[ 226.057389] hub 1-0:1.0: state 5 ports 6 chg 0000 evt 0020
[ 226.057407] ehci_hcd 0000:00:02.2: GetStatus port 5 status 001803 POWER
sig=j CSC CONNECT
[ 226.057427] hub 1-0:1.0: port 5, status 0501, change 0001, 480 Mb/s
[ 226.185364] hub 1-0:1.0: debounce: port 5: total 100ms stable 100ms status
0x501
[ 226.241585] ehci_hcd 0000:00:02.2: port 5 high speed
[ 226.241597] ehci_hcd 0000:00:02.2: GetStatus port 5 status 001005 POWER
sig=se0 PE CONNECT
[ 226.297346] usb 1-5: new high speed USB device using ehci_hcd and address 11
[ 227.297242] usb 1-5: khubd timed out on ep0in len=0/64
[ 228.297002] usb 1-5: khubd timed out on ep0in len=0/64
[ 229.296891] usb 1-5: khubd timed out on ep0in len=0/64
[ 229.352998] ehci_hcd 0000:00:02.2: port 5 high speed
[ 229.353010] ehci_hcd 0000:00:02.2: GetStatus port 5 status 001005 POWER
sig=se0 PE CONNECT
[ 229.408791] usb 1-5: device descriptor read/64, error -110
[ 234.511921] usb 1-5: khubd timed out on ep0in len=0/64
[ 239.511117] usb 1-5: khubd timed out on ep0in len=0/64
-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems? Stop! Download the new AJAX search engine that makes
searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_idv37&alloc_id865&op=click
_______________________________________________
linux-usb-devel@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
