Hello:
After looking the first message twice, and reading the bug report
section on the project home page, i thought to send a second more
correct mail.
I have an Asus P4S533 mother board. It has a SiS 645DX Chipset. It came
with two USB 1.0 OHCI Host Controllers. Both with two usb connectors. In
one of them i have a Thomson DCM245 Cable Modem and a Chicony
Electronics USB Wireless HID for my keyboard and mouse. In the other i
have the Wisegroup MP-8866 Dual USB Joypad i have problem with. It does
not work and when i connect it i can see this in dmesg:
usb 2-1: new low speed USB device using ohci_hcd and address 2
usb 2-1: string descriptor 0 read error: -32
usb 2-1: string descriptor 0 read error: -32
At the moment i'm using 2.6.15-rc7 kernel. I'm loading these modules at
boot: ohci-hcd, uhci-hcd, usbnet, cdc_ether, usbhid, joydev and evdev
among others not related to the problem or usb.
As i said in the first mail, i have collected some urls talking about
the problem. I will add them here so they could be helpful:
https://bugzilla.redhat.com/bugzilla/long_list.cgi?buglist=125353
http://www.spinics.net/lists/usb/msg01863.html
http://www.mail-archive.com/linux-usb-users@lists.sourceforge.net/msg12210.html
http://www.mail-archive.com/linux-usb-devel@lists.sourceforge.net/msg35704.html
The last one is interesting as the author figured out what was the problem.
As suggested by the bug report section i have collected information from
lspci, lsusb, devices and dmesg. I didn't wanted to send a very large
message so i'm sending them as attached files. The information from
those commands is full, not only related to the MP-8866 Dual USB Joypad
as i didn't want to miss anything that could be helpful.
Thank you very much,
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.15-rc7 ohci_hcd
S: Product=OHCI Host Controller
S: SerialNumber=0000:00:02.3
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0925 ProdID=8866 Rev= 2.88
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=400mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 7 Ivl=10ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3
B: Alloc= 42/900 us ( 5%), #Int= 4, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.15-rc7 ohci_hcd
S: Product=OHCI Host Controller
S: SerialNumber=0000:00:02.2
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=02(comm.) Sub=00 Prot=00 MxPS=32 #Cfgs= 1
P: Vendor=069b ProdID=0704 Rev= 1.01
S: Manufacturer=Thomson Inc.
S: Product=Thomson USB CDC Device
S: SerialNumber=009064F02BD4
C:* #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E: Ad=85(I) Atr=03(Int.) MxPS= 8 Ivl=64ms
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=1.5 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=04f2 ProdID=0210 Rev= 0.03
S: Manufacturer=Chicony
S: Product=USB Wireless HID Receiver
C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
I: If#= 2 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid
E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
Linux version 2.6.15-rc7 ([EMAIL PROTECTED]) (gcc versión 3.4.4 (Gentoo
3.4.4-r1, ssp-3.4.4-1.0, pie-8.7.8)) #1 PREEMPT Sun Dec 25 13:09:14 CET 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fffc000 (usable)
BIOS-e820: 000000000fffc000 - 000000000ffff000 (ACPI data)
BIOS-e820: 000000000ffff000 - 0000000010000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
255MB LOWMEM available.
On node 0 totalpages: 65532
DMA zone: 4096 pages, LIFO batch:0
DMA32 zone: 0 pages, LIFO batch:0
Normal zone: 61436 pages, LIFO batch:15
HighMem zone: 0 pages, LIFO batch:0
DMI 2.3 present.
ACPI: RSDP (v000 ASUS ) @ 0x000f6840
ACPI: RSDT (v001 ASUS P4S533 0x42302e31 MSFT 0x31313031) @ 0x0fffc000
ACPI: FADT (v001 ASUS P4S533 0x42302e31 MSFT 0x31313031) @ 0x0fffc100
ACPI: BOOT (v001 ASUS P4S533 0x42302e31 MSFT 0x31313031) @ 0x0fffc040
ACPI: MADT (v001 ASUS P4S533 0x42302e31 MSFT 0x31313031) @ 0x0fffc080
ACPI: DSDT (v001 ASUS P4S533 0x00001000 MSFT 0x0100000b) @ 0x00000000
ACPI: PM-Timer IO Port: 0xe408
Allocating PCI resources starting at 20000000 (gap: 10000000:eec00000)
Built 1 zonelists
Kernel command line: root/dev/hda6
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 16384 bytes)
Detected 1800.461 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 255324k/262128k available (2566k kernel code, 6204k reserved, 837k
data, 148k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3604.24 BogoMIPS (lpj=7208480)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000
00000000 00000000
CPU: After vendor identify, caps: 3febfbff 00000000 00000000 00000000 00000000
00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: After all inits, caps: 3febfbff 00000000 00000000 00000080 00000000
00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
mtrr: v2.0 (20020519)
CPU: Intel(R) Pentium(R) 4 CPU 1.80GHz stepping 04
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0a20)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf15a0, last bus=1
PCI: Using configuration type 1
ACPI: Subsystem revision 20050902
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
Enabling SiS 96x SMBus.
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:01: ioport range 0xe400-0xe47f could not be reserved
pnp: 00:01: ioport range 0xe480-0xe4ff has been reserved
pnp: 00:01: ioport range 0xe600-0xe61f has been reserved
pnp: 00:01: ioport range 0x480-0x48f has been reserved
pnp: 00:0d: ioport range 0x3f0-0x3f1 has been reserved
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: d7000000-d7ffffff
PREFETCH window: dff00000-febfffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
Simple Boot Flag at 0x3a set to 0x1
Machine check exception polling timer started.
audit: initializing netlink socket (disabled)
audit(1135518944.336:1): initialized
Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
NTFS driver 2.1.25 [Flags: R/W].
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ibm_acpi: ec object not found
lp: driver loaded but no devices found
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected SiS 646 chipset
agpgart: AGP aperture is 64M @ 0xd8000000
[drm] Initialized drm 1.0.0 20040925
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)]
lp0: using parport0 (interrupt-driven).
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
PPP generic driver version 2.4.2
NET: Registered protocol family 24
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
8139cp: pci dev 0000:00:0c.0 (id 10ec:8139 rev 10) is not an 8139C+ compatible
chip
8139cp: Try the "8139too" driver instead.
8139too Fast Ethernet driver 0.9.27
PCI: Enabling device 0000:00:0c.0 (0004 -> 0007)
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKA] -> GSI 11 (level, low) ->
IRQ 11
eth0: RealTek RTL8139 at 0xa000, 00:a0:c5:7b:f6:6f, IRQ 11
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 961B MuTIOL IDE UDMA133 controller
ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:pio, hdd:DMA
Probing IDE interface ide0...
hda: Maxtor 6Y120L0, ATA DISK drive
hdb: ST34321A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdd: BENQ DVD DD DW1640, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(33)
hda: cache flushes supported
hda: hda1 hda2 < hda5 hda6 hda7 hda8 >
hdb: max request size: 128KiB
hdb: 8404830 sectors (4303 MB) w/128KiB Cache, CHS=8894/15/63, UDMA(33)
hdb: cache flushes not supported
hdb:
hdd: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
libata version 1.20 loaded.
ieee1394: raw1394: /dev/raw1394 device initialized
usbmon: debugfs is not available
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
mice: PS/2 mouse device common for all mice
Advanced Linux Sound Architecture Driver Version 1.0.10rc3 (Mon Nov 07 13:30:21
2005 UTC).
ALSA device list:
No soundcards found.
oprofile: using timer interrupt.
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 4, 65536 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
ip_conntrack version 2.4 (2047 buckets, 16376 max) - 212 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <[EMAIL PROTECTED]>.
http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
Using IPI Shortcut mode
ACPI wakeup devices:
PCI0 PCI1 PS2K USB0 USB1 MC97
ACPI: (supports S0 S1 S4 S5)
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 148k freed
kjournald starting. Commit interval 5 seconds
Adding 265032k swap on /dev/hda8. Priority:-1 extents:1 across:265032k
EXT3 FS on hda6, internal journal
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:02.2[D] -> Link [LNKE] -> GSI 5 (level, low) -> IRQ
5
ohci_hcd 0000:00:02.2: OHCI Host Controller
ohci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:02.2: irq 5, io mem 0xd6800000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:02.3[A] -> Link [LNKH] -> GSI 11 (level, low) ->
IRQ 11
ohci_hcd 0000:00:02.3: OHCI Host Controller
ohci_hcd 0000:00:02.3: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.3: irq 11, io mem 0xd6000000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
USB Universal Host Controller Interface driver v2.3
usb 1-1: new full speed USB device using ohci_hcd and address 2
usb 1-2: new low speed USB device using ohci_hcd and address 3
eth1: register 'cdc_ether' at usb-0000:00:02.2-1, CDC Ethernet Device,
00:90:64:f0:2b:d4
usbcore: registered new driver cdc_ether
usb 2-1: new low speed USB device using ohci_hcd and address 2
usb 2-1: string descriptor 0 read error: -32
usb 2-1: string descriptor 0 read error: -32
usbcore: registered new driver hiddev
input: Chicony USB Wireless HID Receiver as /class/input/input0
input: USB HID v1.10 Keyboard [Chicony USB Wireless HID Receiver] on
usb-0000:00:02.2-2
input: Chicony USB Wireless HID Receiver as /class/input/input1
input,hiddev96: USB HID v1.10 Device [Chicony USB Wireless HID Receiver] on
usb-0000:00:02.2-2
input: Chicony USB Wireless HID Receiver as /class/input/input2
input: USB HID v1.10 Mouse [Chicony USB Wireless HID Receiver] on
usb-0000:00:02.2-2
input: HID 0925:8866 as /class/input/input3
input: USB HID v1.00 Joystick [HID 0925:8866] on usb-0000:00:02.3-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PCI: Enabling device 0000:00:0a.0 (0004 -> 0005)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 11 (level, low) ->
IRQ 11
PCI: Enabling device 0000:00:0a.1 (0004 -> 0005)
gameport: EMU10K1 is pci0000:00:0a.1/gameport0, io 0xa400, speed 994kHz
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda7, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
EXT3 FS on hda6, internal journal
NTFS volume version 3.1.
NTFS volume version 3.1.
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) ->
IRQ 11
NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-8178 Wed Dec 14
16:22:51 PST 2005
eth1: no IPv6 routers present
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
usb 2-1: usbfs: process 8429 (lsusb) did not claim interface 0 before use
usb 1-2: usbfs: process 8429 (lsusb) did not claim interface 0 before use
usb 1-2: usbfs: process 8429 (lsusb) did not claim interface 1 before use
usb 1-2: usbfs: process 8429 (lsusb) did not claim interface 2 before use
usb 2-1: usbfs: process 8430 (lsusb) did not claim interface 0 before use
usb 1-2: usbfs: process 8430 (lsusb) did not claim interface 0 before use
usb 1-2: usbfs: process 8430 (lsusb) did not claim interface 1 before use
usb 1-2: usbfs: process 8430 (lsusb) did not claim interface 2 before use
00:00.0 Host bridge: Silicon Integrated Systems [SiS] SiS645DX Host & Memory &
AGP Controller
Subsystem: ASUSTeK Computer Inc. Unknown device 8081
Flags: bus master, medium devsel, latency 32
Memory at d8000000 (32-bit, non-prefetchable) [size=64M]
Capabilities: [c0] AGP version 2.0
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge
(AGP) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: d7000000-d7ffffff
Prefetchable memory behind bridge: dff00000-febfffff
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS961 [MuTIOL Media IO]
(rev 10)
Flags: bus master, medium devsel, latency 0
00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
Flags: medium devsel
I/O ports at e600 [size=32]
00:02.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller
(rev 07) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device 807a
Flags: bus master, medium devsel, latency 32, IRQ 5
Memory at d6800000 (32-bit, non-prefetchable) [size=4K]
00:02.3 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller
(rev 07) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Unknown device 807a
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at d6000000 (32-bit, non-prefetchable) [size=4K]
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0)
(prog-if 80 [Master])
Subsystem: ASUSTeK Computer Inc. Unknown device 807a
Flags: bus master, fast devsel, latency 128
I/O ports at d800 [size=16]
00:0a.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 06)
Subsystem: Creative Labs CT4832 SBLive! Value
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at a800 [size=32]
Capabilities: [dc] Power Management version 1
00:0a.1 Input device controller: Creative Labs SB Live! MIDI/Game Port (rev 06)
Subsystem: Creative Labs Gameport Joystick
Flags: bus master, medium devsel, latency 32
I/O ports at a400 [size=8]
Capabilities: [dc] Power Management version 1
00:0c.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
Subsystem: ZyXEL Communication Corporation Unknown device 3303
Flags: bus master, medium devsel, latency 32, IRQ 11
I/O ports at a000 [size=256]
Memory at d5000000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200]
(rev a1) (prog-if 00 [VGA])
Flags: bus master, 66MHz, medium devsel, latency 248, IRQ 11
Memory at d7000000 (32-bit, non-prefetchable) [size=16M]
Memory at e0000000 (32-bit, prefetchable) [size=256M]
[virtual] Expansion ROM at dffe0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Capabilities: [44] AGP version 3.0
Bus 002 Device 002: ID 0925:8866 Wisegroup, Ltd MP-8866 Dual USB Joypad
Language IDs: none (cannot get min. string descriptor; got len=-1,
error=32:Broken pipe)
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0925 Wisegroup, Ltd
idProduct 0x8866 MP-8866 Dual USB Joypad
bcdDevice 2.88
iManufacturer 1
iProduct 2 MP-8866 Dual USB Joypad
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
MaxPower 400mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Devices
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 0 None
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.00
bCountryCode 0
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 188
cannot get report descriptor
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
wMaxPacketSize 7
bInterval 10
Language IDs: none (cannot get min. string descriptor; got len=-1,
error=32:Broken pipe)
Bus 002 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.15-rc7 ohci_hcd
iProduct 2 OHCI Host Controller
iSerial 1 0000:00:02.3
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
wMaxPacketSize 2
bInterval 255
Language IDs: (length=4)
0409 English(US)
Bus 001 Device 003: ID 04f2:0210 Chicony Electronics Co., Ltd
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x04f2 Chicony Electronics Co., Ltd
idProduct 0x0210
bcdDevice 0.03
iManufacturer 1
iProduct 2
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 84
bNumInterfaces 3
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Devices
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 1 Keyboard
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 33
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 65
cannot get report descriptor
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
wMaxPacketSize 8
bInterval 10
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Devices
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 0 None
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 33
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 238
cannot get report descriptor
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
wMaxPacketSize 8
bInterval 10
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 2
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Devices
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.10
bCountryCode 33
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 50
cannot get report descriptor
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
wMaxPacketSize 8
bInterval 10
Language IDs: (length=4)
0409 English(US)
Bus 001 Device 002: ID 069b:0704 Thomson, Inc. DCM245 Cable Modem
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 2 Communications
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 32
idVendor 0x069b Thomson, Inc.
idProduct 0x0704 DCM245 Cable Modem
bcdDevice 1.01
iManufacturer 1 Thomson Inc.
iProduct 2 Thomson USB CDC Device
iSerial 3 009064F02BD4
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 80
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 4
bmAttributes 0xc0
Self Powered
MaxPower 100mA
unknown descriptor type: 05 24 00 10 01
unknown descriptor type: 05 24 06 00 01
unknown descriptor type: 0d 24 0f 03 00 00 00 00 ea 05 00 00 00
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 6 Ethernet Networking
bInterfaceProtocol 0
iInterface 5 Communication Interface Class
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
wMaxPacketSize 8
bInterval 64
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 0
bInterfaceClass 10 Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 6 Data Interface Class
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 1
bNumEndpoints 2
bInterfaceClass 10 Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 6 Data Interface Class
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type none
wMaxPacketSize 64
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type none
wMaxPacketSize 64
bInterval 0
Language IDs: (length=4)
0409 English(US)
Bus 001 Device 001: ID 0000:0000
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0 Unused
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0000
idProduct 0x0000
bcdDevice 2.06
iManufacturer 3 Linux 2.6.15-rc7 ohci_hcd
iProduct 2 OHCI Host Controller
iSerial 1 0000:00:02.2
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
wMaxPacketSize 2
bInterval 255
Language IDs: (length=4)
0409 English(US)
