Hi Dave, It definitely was a DMA problem, could figure it out, now (my board)she runs like an angel.
Thanks shivas ----- Original Message ----- From: David Brownell <[EMAIL PROTECTED]> To: [email protected] Cc: Shivahshankar Shankarnarayan Rao <[EMAIL PROTECTED]> Sent: Thu, 29 Dec 2005 16:23:38 -0800 Subject: Re: [linux-usb-devel] OHCI Unrecoverable error on ARM Linux 2.6.14 > On Monday 26 December 2005 7:01 pm, Shivahshankar Shankarnarayan Rao wrote: > > Hi All, > > > > Am having a PCI bridge on a custom ARM 922 board. The PCI initialization is > > fine and the OHCI driver is called after the Initialization I get "OHCI > > unrecoverable error" and core dumps continuously. > > Thoese UE errors usually boil down to DMA failures. I notice > it hadn't even written a frame number into the HCCA yet, so > you might double check that dma setup. > > - Dave > > > ------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://ads.osdn.com/?ad_idv37&alloc_id865&op=click _______________________________________________ [email protected] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
