Hi, uhci-hcd driver is loaded, because I built it in the kernel to be sure it's correctly loaded. So, it's enabled.
dmesg displays, when I boot with my hd connected, this (about USB): Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Athlon(tm) XP 1900+ stepping 02 Enabling fast FPU save and restore... done. Linux Plug and Play Support v0.97 (c) Adam Belay SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected VIA KT266/KY266x/KT333 chipset agpgart: Maximum main memory to use for agp memory: 203M agpgart: AGP aperture is 64M @ 0xe0000000 [drm] Initialized drm 1.0.0 20040925 ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) USB Universal Host Controller Interface driver v2.2 uhci_hcd 0000:00:11.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller uhci_hcd 0000:00:11.2: irq 11, io base 0xd800 uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:11.2: USBCMD_HCRESET timed out! uhci_hcd 0000:00:11.2: init error -110 uhci_hcd 0000:00:11.2: remove, state 0 Uninitialised timer! This is just a warning. Your computer is OK function=0x00000000, data=0x0 [<c011f9ed>] check_timer_failed+0x5d/0x70 [<c011fdfb>] del_timer+0x1b/0xc0 [<c026dd1d>] uhci_stop+0x1d/0xb0 [<c025a66f>] usb_hcd_pci_remove+0x8f/0x1b0 [<c025a395>] usb_hcd_pci_probe+0x2b5/0x500 [<c01c42f2>] pci_device_probe_static+0x52/0x70 [<c01c434c>] __pci_device_probe+0x3c/0x50 [<c01c438c>] pci_device_probe+0x2c/0x60 [<c0203e2f>] driver_probe_device+0x2f/0x80 [<c0203f82>] driver_attach+0x52/0xa0 [<c02044c8>] bus_add_driver+0x98/0xe0 [<c0204b2f>] driver_register+0x2f/0x40 [<c01c461c>] pci_register_driver+0x5c/0x80 [<c03c6a9f>] uhci_hcd_init+0x7f/0x100 [<c03ae883>] do_initcalls+0x53/0xc0 [<c01002b0>] init+0x0/0x120 [<c01002b0>] init+0x0/0x120 [<c01002df>] init+0x2f/0x120 [<c0100830>] kernel_thread_helper+0x0/0x10 [<c0100835>] kernel_thread_helper+0x5/0x10 uhci_hcd 0000:00:11.2: USB bus 1 deregistered uhci_hcd: probe of 0000:00:11.2 failed with error -110 uhci_hcd 0000:00:11.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2) uhci_hcd 0000:00:11.3: irq 11, io base 0xdc00 uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:11.3: USBCMD_HCRESET timed out! uhci_hcd 0000:00:11.3: init error -110 uhci_hcd 0000:00:11.3: remove, state 0 Uninitialised timer! This is just a warning. Your computer is OK function=0x00000000, data=0x0 [<c011f9ed>] check_timer_failed+0x5d/0x70 [<c011fdfb>] del_timer+0x1b/0xc0 [<c026dd1d>] uhci_stop+0x1d/0xb0 [<c025a66f>] usb_hcd_pci_remove+0x8f/0x1b0 [<c025a395>] usb_hcd_pci_probe+0x2b5/0x500 [<c01c42f2>] pci_device_probe_static+0x52/0x70 [<c01c434c>] __pci_device_probe+0x3c/0x50 [<c01c438c>] pci_device_probe+0x2c/0x60 [<c0203e2f>] driver_probe_device+0x2f/0x80 [<c0203f82>] driver_attach+0x52/0xa0 [<c02044c8>] bus_add_driver+0x98/0xe0 [<c0204b2f>] driver_register+0x2f/0x40 [<c01c461c>] pci_register_driver+0x5c/0x80 [<c03c6a9f>] uhci_hcd_init+0x7f/0x100 [<c03ae883>] do_initcalls+0x53/0xc0 [<c01002b0>] init+0x0/0x120 [<c01002b0>] init+0x0/0x120 [<c01002df>] init+0x2f/0x120 [<c0100830>] kernel_thread_helper+0x0/0x10 [<c0100835>] kernel_thread_helper+0x5/0x10 uhci_hcd 0000:00:11.3: USB bus 1 deregistered uhci_hcd: probe of 0000:00:11.3 failed with error -110 uhci_hcd 0000:00:11.4: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3) uhci_hcd 0000:00:11.4: irq 11, io base 0xe000 uhci_hcd 0000:00:11.4: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:11.4: USBCMD_HCRESET timed out! uhci_hcd 0000:00:11.4: init error -110 uhci_hcd 0000:00:11.4: remove, state 0 Uninitialised timer! This is just a warning. Your computer is OK function=0x00000000, data=0x0 [<c011f9ed>] check_timer_failed+0x5d/0x70 [<c011fdfb>] del_timer+0x1b/0xc0 [<c026dd1d>] uhci_stop+0x1d/0xb0 [<c025a66f>] usb_hcd_pci_remove+0x8f/0x1b0 [<c025a395>] usb_hcd_pci_probe+0x2b5/0x500 [<c01c42f2>] pci_device_probe_static+0x52/0x70 [<c01c434c>] __pci_device_probe+0x3c/0x50 [<c01c438c>] pci_device_probe+0x2c/0x60 [<c0203e2f>] driver_probe_device+0x2f/0x80 [<c0203f82>] driver_attach+0x52/0xa0 [<c02044c8>] bus_add_driver+0x98/0xe0 [<c0204b2f>] driver_register+0x2f/0x40 [<c01c461c>] pci_register_driver+0x5c/0x80 [<c03c6a9f>] uhci_hcd_init+0x7f/0x100 [<c03ae883>] do_initcalls+0x53/0xc0 [<c01002b0>] init+0x0/0x120 [<c01002b0>] init+0x0/0x120 [<c01002df>] init+0x2f/0x120 [<c0100830>] kernel_thread_helper+0x0/0x10 [<c0100835>] kernel_thread_helper+0x5/0x10 uhci_hcd 0000:00:11.4: USB bus 1 deregistered uhci_hcd: probe of 0000:00:11.4 failed with error -110 Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver Thanks for your help, and information. That's right I really don't know jhat I can do, because I don't find the origin of the problem. Sincerely, JP ------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642 _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
