>>>>> "Pete" == Pete Zaitcev <[EMAIL PROTECTED]> writes: Pete> On Sun, 12 Mar 2006 14:49:56 +0100, Jan Rychter <[EMAIL PROTECTED]> Pete> wrote: >> Thanks for the hint. I've attached a trace -- it didn't take long to >> reproduce the problem. [...]
Pete> All we see that the printer does not complete a transfer. Pete> At this point I think we can exonerate usblp.c. Only two Pete> possibilities remain that I can see: Pete> - foo2zjs should insert padding to let printer breathe, or worse, Pete> it has to be an actual delay in front of the chunk, Pete> - Something is not right with the Host Controller or its driver. Pete> Unfortunately, I do not see any easy way to split the two. Pete> Have you tried to put a USB 1.1 hub in between the printer and Pete> the host, or trying "rmmod ehci_hcd"? I've tried the latter -- these problems occur both with and without ehci_hcd. Should I try with a USB 1.1 hub? --J. ------------------------------------------------------- This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory! http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642 _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
