On Wed, 31 May 2006, Bart Whiteley wrote: > I haven't been able to get my RCA Lyra to work reliably with Linux. I > often get failures while reading or writing to the device. > > I'm running 2.6.16.18. I have enabled CONFIG_USB_STORAGE_DEBUG. I've > attached logs from two different session. The first failed while > writing to the device, after successfully reading from it. The second > is a failure while reading from the device.
In reality both logs show a failure occurring during a write. There's no obvious reason why the device should crash like this. Apparently it just doesn't like 120 KB writes. You wouldn't think something like that would bother a flash device, but in this case it does. Perhaps if you set max_sectors to 64 it will help. (See the explanation at <http://www.linux-usb.org/FAQ.html#i5>.) Alan Stern ------------------------------------------------------- All the advantages of Linux Managed Hosting--Without the Cost and Risk! Fully trained technicians. The highest number of Red Hat certifications in the hosting industry. Fanatical Support. Click to learn more http://sel.as-us.falkag.net/sel?cmd=lnk&kid=107521&bid=248729&dat=121642 _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
