Greg:
This patch (as700) modifies the hub driver to take advantage of the new
usb_reset_composite_device API. The existing code had special-case calls
stuck into usb_reset_device, just before and after the reset. With the
new version there's no need for special-case stuff; it all happens
naturally in the form of pre_reset and post_reset notifications.
Alan Stern
Signed-off-by: Alan Stern <[EMAIL PROTECTED]>
---
Index: usb-2.6/drivers/usb/core/hub.c
===================================================================
--- usb-2.6.orig/drivers/usb/core/hub.c
+++ usb-2.6/drivers/usb/core/hub.c
@@ -525,15 +525,16 @@ static int hub_port_disable(struct usb_h
/* caller has locked the hub device */
-static void hub_pre_reset(struct usb_hub *hub, int disable_ports)
+static void hub_pre_reset(struct usb_interface *intf)
{
+ struct usb_hub *hub = usb_get_intfdata(intf);
struct usb_device *hdev = hub->hdev;
int port1;
for (port1 = 1; port1 <= hdev->maxchild; ++port1) {
if (hdev->children[port1 - 1]) {
usb_disconnect(&hdev->children[port1 - 1]);
- if (disable_ports)
+ if (hub->error == 0)
hub_port_disable(hub, port1, 0);
}
}
@@ -541,8 +542,10 @@ static void hub_pre_reset(struct usb_hub
}
/* caller has locked the hub device */
-static void hub_post_reset(struct usb_hub *hub)
+static void hub_post_reset(struct usb_interface *intf)
{
+ struct usb_hub *hub = usb_get_intfdata(intf);
+
hub_activate(hub);
hub_power_on(hub);
}
@@ -802,15 +805,16 @@ static void hub_disconnect(struct usb_in
struct usb_hub *hub = usb_get_intfdata (intf);
struct usb_device *hdev;
+ /* Disconnect all children and quiesce the hub */
+ hub->error = 0;
+ hub_pre_reset(intf);
+
usb_set_intfdata (intf, NULL);
hdev = hub->hdev;
if (hdev->speed == USB_SPEED_HIGH)
highspeed_hubs--;
- /* Disconnect all children and quiesce the hub */
- hub_pre_reset(hub, 1);
-
usb_free_urb(hub->urb);
hub->urb = NULL;
@@ -2737,7 +2741,8 @@ static void hub_events(void)
/* If the hub has died, clean up after it */
if (hdev->state == USB_STATE_NOTATTACHED) {
- hub_pre_reset(hub, 0);
+ hub->error = -ENODEV;
+ hub_pre_reset(intf);
goto loop;
}
@@ -2749,7 +2754,7 @@ static void hub_events(void)
dev_dbg (hub_dev, "resetting for error %d\n",
hub->error);
- ret = usb_reset_device(hdev);
+ ret = usb_reset_composite_device(hdev, intf);
if (ret) {
dev_dbg (hub_dev,
"error resetting hub: %d\n", ret);
@@ -2918,6 +2923,8 @@ static struct usb_driver hub_driver = {
.disconnect = hub_disconnect,
.suspend = hub_suspend,
.resume = hub_resume,
+ .pre_reset = hub_pre_reset,
+ .post_reset = hub_post_reset,
.ioctl = hub_ioctl,
.id_table = hub_id_table,
};
@@ -3023,7 +3030,6 @@ int usb_reset_device(struct usb_device *
struct usb_device *parent_hdev = udev->parent;
struct usb_hub *parent_hub;
struct usb_device_descriptor descriptor = udev->descriptor;
- struct usb_hub *hub = NULL;
int i, ret = 0;
int port1 = udev->portnum;
@@ -3041,14 +3047,6 @@ int usb_reset_device(struct usb_device *
}
parent_hub = hdev_to_hub(parent_hdev);
- /* If we're resetting an active hub, take some special actions */
- if (udev->actconfig && udev->actconfig->desc.bNumInterfaces > 0 &&
- udev->actconfig->interface[0]->dev.driver ==
- &hub_driver.driver &&
- (hub = hdev_to_hub(udev)) != NULL) {
- hub_pre_reset(hub, 0);
- }
-
set_bit(port1, parent_hub->busy_bits);
for (i = 0; i < SET_CONFIG_TRIES; ++i) {
@@ -3107,8 +3105,6 @@ int usb_reset_device(struct usb_device *
}
done:
- if (hub)
- hub_post_reset(hub);
return 0;
re_enumerate:
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
