From: David Brownell <[EMAIL PROTECTED]>
This moves header files for controller-specific platform data
from <linux/usb_XXX.h> to <linux/usb/XXX.h> to start reducing
some clutter.
Signed-off-by: David Brownell <[EMAIL PROTECTED]>
Signed-off-by: Greg Kroah-Hartman <[EMAIL PROTECTED]>
---
drivers/usb/host/isp116x-hcd.c | 2 +-
drivers/usb/host/sl811-hcd.c | 2 +-
drivers/usb/host/sl811_cs.c | 2 +-
include/linux/usb/isp116x.h | 29 +++++++++++++++++++++++++++++
include/linux/usb/sl811.h | 26 ++++++++++++++++++++++++++
include/linux/usb_isp116x.h | 29 -----------------------------
include/linux/usb_sl811.h | 26 --------------------------
7 files changed, 58 insertions(+), 58 deletions(-)
diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c
index c5e2240..1438625 100644
--- a/drivers/usb/host/isp116x-hcd.c
+++ b/drivers/usb/host/isp116x-hcd.c
@@ -63,7 +63,7 @@ #include <linux/errno.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/usb.h>
-#include <linux/usb_isp116x.h>
+#include <linux/usb/isp116x.h>
#include <linux/platform_device.h>
#include <asm/io.h>
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index a923430..6b4bc3f 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -46,7 +46,7 @@ #include <linux/timer.h>
#include <linux/list.h>
#include <linux/interrupt.h>
#include <linux/usb.h>
-#include <linux/usb_sl811.h>
+#include <linux/usb/sl811.h>
#include <linux/platform_device.h>
#include <asm/io.h>
diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c
index 302aa1e..54f554e 100644
--- a/drivers/usb/host/sl811_cs.c
+++ b/drivers/usb/host/sl811_cs.c
@@ -27,7 +27,7 @@ #include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
#include <pcmcia/ds.h>
-#include <linux/usb_sl811.h>
+#include <linux/usb/sl811.h>
MODULE_AUTHOR("Botond Botyanszki");
MODULE_DESCRIPTION("REX-CFU1U PCMCIA driver for 2.6");
diff --git a/include/linux/usb/isp116x.h b/include/linux/usb/isp116x.h
new file mode 100644
index 0000000..436dd8a
--- /dev/null
+++ b/include/linux/usb/isp116x.h
@@ -0,0 +1,29 @@
+
+/*
+ * Board initialization code should put one of these into dev->platform_data
+ * and place the isp116x onto platform_bus.
+ */
+
+struct isp116x_platform_data {
+ /* Enable internal resistors on downstream ports */
+ unsigned sel15Kres:1;
+ /* On-chip overcurrent detection */
+ unsigned oc_enable:1;
+ /* INT output polarity */
+ unsigned int_act_high:1;
+ /* INT edge or level triggered */
+ unsigned int_edge_triggered:1;
+ /* Enable wakeup by devices on usb bus (e.g. wakeup
+ by attachment/detachment or by device activity
+ such as moving a mouse). When chosen, this option
+ prevents stopping internal clock, increasing
+ thereby power consumption in suspended state. */
+ unsigned remote_wakeup_enable:1;
+ /* Inter-io delay (ns). The chip is picky about access timings; it
+ expects at least:
+ 150ns delay between consecutive accesses to DATA_REG,
+ 300ns delay between access to ADDR_REG and DATA_REG
+ OE, WE MUST NOT be changed during these intervals
+ */
+ void (*delay) (struct device * dev, int delay);
+};
diff --git a/include/linux/usb/sl811.h b/include/linux/usb/sl811.h
new file mode 100644
index 0000000..397ee3b
--- /dev/null
+++ b/include/linux/usb/sl811.h
@@ -0,0 +1,26 @@
+
+/*
+ * board initialization should put one of these into dev->platform_data
+ * and place the sl811hs onto platform_bus named "sl811-hcd".
+ */
+
+struct sl811_platform_data {
+ unsigned can_wakeup:1;
+
+ /* given port_power, msec/2 after power on till power good */
+ u8 potpg;
+
+ /* mA/2 power supplied on this port (max = default = 250) */
+ u8 power;
+
+ /* sl811 relies on an external source of VBUS current */
+ void (*port_power)(struct device *dev, int is_on);
+
+ /* pulse sl811 nRST (probably with a GPIO) */
+ void (*reset)(struct device *dev);
+
+ // some boards need something like these:
+ // int (*check_overcurrent)(struct device *dev);
+ // void (*clock_enable)(struct device *dev, int is_on);
+};
+
diff --git a/include/linux/usb_isp116x.h b/include/linux/usb_isp116x.h
deleted file mode 100644
index 436dd8a..0000000
--- a/include/linux/usb_isp116x.h
+++ /dev/null
@@ -1,29 +0,0 @@
-
-/*
- * Board initialization code should put one of these into dev->platform_data
- * and place the isp116x onto platform_bus.
- */
-
-struct isp116x_platform_data {
- /* Enable internal resistors on downstream ports */
- unsigned sel15Kres:1;
- /* On-chip overcurrent detection */
- unsigned oc_enable:1;
- /* INT output polarity */
- unsigned int_act_high:1;
- /* INT edge or level triggered */
- unsigned int_edge_triggered:1;
- /* Enable wakeup by devices on usb bus (e.g. wakeup
- by attachment/detachment or by device activity
- such as moving a mouse). When chosen, this option
- prevents stopping internal clock, increasing
- thereby power consumption in suspended state. */
- unsigned remote_wakeup_enable:1;
- /* Inter-io delay (ns). The chip is picky about access timings; it
- expects at least:
- 150ns delay between consecutive accesses to DATA_REG,
- 300ns delay between access to ADDR_REG and DATA_REG
- OE, WE MUST NOT be changed during these intervals
- */
- void (*delay) (struct device * dev, int delay);
-};
diff --git a/include/linux/usb_sl811.h b/include/linux/usb_sl811.h
deleted file mode 100644
index 4f2d012..0000000
--- a/include/linux/usb_sl811.h
+++ /dev/null
@@ -1,26 +0,0 @@
-
-/*
- * board initialization should put one of these into dev->platform_data
- * and place the sl811hs onto platform_bus named "sl811-hcd".
- */
-
-struct sl811_platform_data {
- unsigned can_wakeup:1;
-
- /* given port_power, msec/2 after power on till power good */
- u8 potpg;
-
- /* mA/2 power supplied on this port (max = default = 250) */
- u8 power;
-
- /* sl811 relies on an external source of VBUS current */
- void (*port_power)(struct device *dev, int is_on);
-
- /* pulse sl811 nRST (probably with a GPIO) */
- void (*reset)(struct device *dev);
-
- // some boards need something like these:
- // int (*check_overcurrent)(struct device *dev);
- // void (*clock_enable)(struct device *dev, int is_on);
-};
-
--
1.4.0
All the advantages of Linux Managed Hosting--Without the Cost and Risk!
Fully trained technicians. The highest number of Red Hat certifications in
the hosting industry. Fanatical Support. Click to learn more
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=107521&bid=248729&dat=121642
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
