On Fri, 2006-06-30 at 00:10 -0700, Andrew Morton wrote:
> >
> > ...
> >
> > +static void airprime_read_bulk_callback(struct urb *urb, struct pt_regs
> > *regs)
> > +{
...
> > + tty = port->tty;
> > + if (tty && urb->actual_length) {
> > + tty_buffer_request_room(tty, urb->actual_length);
> > + tty_insert_flip_string(tty, data, urb->actual_length);
>
> Is it correct to ignore the return value from those two functions?
Not my code :) - generic.c and several other drivers do the same
thing... Not that that's an excuse, of course :)
Actually though, I think it's OK to ignore the tty_insert_flip_string
result. These adapters are used at layer 1 for ppp connection, the
higher layers will attempt to recover.
I will remove the tty_buffer_request_room() call though, as suggested by
Sergei Organov and Alan Cox.
>
> > + tty_flip_buffer_push(tty);
> > + }
> > + /* should this use GFP_KERNEL? */
> > + result = usb_submit_urb(urb, GFP_ATOMIC);
>
> If possible, yep.
Oops - that was a comment to myself I left in by mistake. As pointed out
by Pete Zaitcev, this is a callback function. I think it has to be
GFP_ATOMIC here, doesn't it?
>
> > ...
> >
> > +static int airprime_open(struct usb_serial_port *port, struct file *filp)
> > +{
> > + struct airprime_private *priv = usb_get_serial_port_data(port);
> > + struct usb_serial *serial = port->serial;
> > + struct urb *urb;
> > + char *buffer;
> > + int i;
> > + int result = 0;
> > +
> > + dbg("%s - port %d", __FUNCTION__, port->number);
> > +
> > + /* initialize our private data structure if it isn't already created */
> > + if (!priv) {
> > + priv = kzalloc(sizeof(*priv), GFP_KERNEL);
> > + if (!priv)
> > + return -ENOMEM;
> > + spin_lock_init(&priv->lock);
> > + usb_set_serial_port_data(port, priv);
> > + }
> > + /* TODO handle error conditions better, right now we leak memory */
> > + for (i = 0; i < NUM_READ_URBS; ++i) {
> > + buffer = kmalloc(buffer_size, GFP_KERNEL);
> > + if (!buffer) {
> > + dev_err(&port->dev, "%s - out of memory.\n",
> > + __FUNCTION__);
> > + return -ENOMEM;
> > + }
> > + urb = usb_alloc_urb(0, GFP_KERNEL);
> > + if (!urb) {
> > + dev_err(&port->dev, "%s - no more urbs?\n",
> > + __FUNCTION__);
> > + return -ENOMEM;
> > + }
> > + usb_fill_bulk_urb(urb, serial->dev,
> > + usb_rcvbulkpipe(serial->dev,
> > +
> > port->bulk_out_endpointAddress),
> > + buffer, buffer_size,
> > + airprime_read_bulk_callback, port);
> > + result = usb_submit_urb(urb, GFP_KERNEL);
> > + if (result) {
> > + dev_err(&port->dev,
> > + "%s - failed submitting read urb %d for port
> > %d, error %d\n",
> > + __FUNCTION__, i, port->number, result);
> > + return result;
> > + }
> > + /* fun with reference counting, when this urb is finished, the
> > + * host driver will free it up automatically */
> > + /* don't do this here, we need the urb to stay around until the
> > close
> > + function can take care of it */
> > + //usb_free_urb (urb);
> > + /* instead remember this urb so we can kill it when the
> > + port is closed */
> > + priv->read_urbp[i] = urb;
> > + }
> > + return result;
> > +}
> > +
>
> This function leaks memory all over the place if something goes wrong.
Indeed. Hence the TODO comment.
>
> Please redesign it to have a single `return' statement. You'll find that'll
> help avoid leaks now and during any later enhancements.
OK, I'll work on that.
>
>
> > +{
> > + struct airprime_private *priv = usb_get_serial_port_data(port);
> > + int i;
> > +
> > + dbg("%s - port %d", __FUNCTION__, port->number);
> > +
> > + /* killing the urb will invoke read_bulk_callback() with an error
> > status,
> > + so the transfer buffer will be freed there */
> > + for (i = 0; i < NUM_READ_URBS; ++i) {
> > + usb_kill_urb (priv->read_urbp[i]);
> > + usb_free_urb (priv->read_urbp[i]);
> > + }
> > +
> > + /* free up private structure? */
>
> Yes please ;)
Easily done. But we'd need another one next time the port is opened. Why
not just allocate it once and keep reusing it?
>
> > +}
> > +
> > +static int airprime_write(struct usb_serial_port *port,
> > + const unsigned char *buf, int count)
> > +{
> > + struct airprime_private *priv = usb_get_serial_port_data(port);
> > + struct usb_serial *serial = port->serial;
> > + struct urb *urb;
> > + unsigned char *buffer;
> > + unsigned long flags;
> > + int status;
> > + dbg("%s - port %d", __FUNCTION__, port->number);
> > +
> > + spin_lock_irqsave(&priv->lock, flags);
> > + if (priv->outstanding_urbs > NUM_WRITE_URBS) {
> > + spin_unlock_irqrestore(&priv->lock, flags);
> > + dbg("%s - write limit hit\n", __FUNCTION__);
> > + return 0;
> > + }
> > + spin_unlock_irqrestore(&priv->lock, flags);
> > + buffer = kmalloc(count, GFP_ATOMIC);
> > + if (!buffer) {
> > + dev_err(&port->dev, "out of memory\n");
> > + return -ENOMEM;
> > + }
> > + urb = usb_alloc_urb(0, GFP_ATOMIC);
> > + if (!urb) {
> > + dev_err(&port->dev, "no more free urbs\n");
> > + kfree (buffer);
> > + return -ENOMEM;
> > + }
> > + memcpy (buffer, buf, count);
> > +
> > + usb_serial_debug_data(debug, &port->dev, __FUNCTION__, count, buffer);
> > +
> > + usb_fill_bulk_urb(urb, serial->dev,
> > + usb_sndbulkpipe(serial->dev,
> > + port->bulk_out_endpointAddress),
> > + buffer, count,
> > + airprime_write_bulk_callback, port);
> > +
> > + /* send it down the pipe */
> > + status = usb_submit_urb(urb, GFP_ATOMIC);
> > + if (status) {
> > + dev_err(&port->dev,
> > + "%s - usb_submit_urb(write bulk) failed with status =
> > %d\n",
> > + __FUNCTION__, status);
> > + count = status;
> > + kfree (buffer);
> > + } else {
> > + spin_lock_irqsave(&priv->lock, flags);
> > + ++priv->outstanding_urbs;
> > + spin_unlock_irqrestore(&priv->lock, flags);
> > + }
> > + /* we are done with this urb, so let the host driver
> > + * really free it when it is finished with it */
> > + usb_free_urb (urb);
> > + return count;
> > +}
>
> Is usb_serial_driver.write() really called in a context in which it is
> forced to use GFP_ATOMIC?
No idea. Safer to leave this as is, I think.
>
> Again, implementing this function as single-exit would make it easier to
> maintain.
OK.
>
> > +MODULE_PARM_DESC(debug, "Debug enabled or not");
>
> Just "Debug enabled".
>
> > +module_param(buffer_size, int, 0);
> > +MODULE_PARM_DESC(buffer_size, "Size of the transfer buffers");
>
> Units?
>
I'll fix these.
Thanks for reviewing this.
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
linux-usb-devel@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
