This patch adds support for Ontrak ADU USB devices.
Patch is against 2.6.17.7
Feedback and comments are highly appreciated.
Signed-off-by: Steven Haigh <[EMAIL PROTECTED]>
---
diff -uprN -X linux-2.6.17.7-vanilla/Documentation/dontdiff
linux-2.6.17.7-vanilla/drivers/usb/input/hid-core.c linux-2.6.17.7/
drivers/usb/input/hid-core.c
--- linux-2.6.17.7-vanilla/drivers/usb/input/hid-core.c 2006-07-25
13:36:01.000000000 +1000
+++ linux-2.6.17.7/drivers/usb/input/hid-core.c 2006-08-07
15:27:11.000000000 +1000
@@ -1617,7 +1617,11 @@ static const struct hid_blacklist {
{ USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS1, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100,
HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 20,
HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 30,
HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 100,
HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 108,
HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 118,
HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 200,
HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 300,
HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_ONTRAK, USB_DEVICE_ID_ONTRAK_ADU100 + 400,
HID_QUIRK_IGNORE },
diff -uprN -X linux-2.6.17.7-vanilla/Documentation/dontdiff
linux-2.6.17.7-vanilla/drivers/usb/Makefile linux-2.6.17.7/drivers/
usb/Makefile
--- linux-2.6.17.7-vanilla/drivers/usb/Makefile 2006-07-25
13:36:01.000000000 +1000
+++ linux-2.6.17.7/drivers/usb/Makefile 2006-08-07 15:27:11.000000000
+1000
@@ -61,6 +61,7 @@ obj-$(CONFIG_USB_TEST) += misc/
obj-$(CONFIG_USB_USS720) += misc/
obj-$(CONFIG_USB_PHIDGETSERVO) += misc/
obj-$(CONFIG_USB_SISUSBVGA) += misc/
+obj-$(CONFIG_USB_ADUTUX) += misc/
obj-$(CONFIG_USB_ATM) += atm/
obj-$(CONFIG_USB_SPEEDTOUCH) += atm/
diff -uprN -X linux-2.6.17.7-vanilla/Documentation/dontdiff
linux-2.6.17.7-vanilla/drivers/usb/misc/adutux.c linux-2.6.17.7/
drivers/usb/misc/adutux.c
--- linux-2.6.17.7-vanilla/drivers/usb/misc/adutux.c 1970-01-01
10:00:00.000000000 +1000
+++ linux-2.6.17.7/drivers/usb/misc/adutux.c 2006-08-09
07:32:33.000000000 +1000
@@ -0,0 +1,1051 @@
+/*
+ * adutux - driver for ADU devices from Ontrak Control Systems
+ * This is an experimental driver. Use at your own risk.
+ * This driver is not supported by Ontrak Control Systems.
+ *
+ * Copyright (c) 2003 John Homppi (SCO, leave this notice here)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * derived from the Lego USB Tower driver 0.56:
+ * Copyright (c) 2003 David Glance <davidgsf <at> sourceforge.net>
+ * 2001 Juergen Stuber <stuber <at> loria.fr>
+ * that was derived from USB Skeleton driver - 0.5
+ * Copyright (c) 2001 Greg Kroah-Hartman (greg <at> kroah.com)
+ *
+ * History:
+ *
+ * 2006-08-07 - 0.0.13 - shaigh
+ * - fixed various errors to compile on kernel 2.6.17.7
+ * 2006-02-19 - 0.0.12 - jhomppi
+ * - remove the mode parameter from the usb_class_driver structure
+ * (for kernel version 2.6.15)
+ * 2006-02-03 - 0.0.11 jhomppi
+ * - remove the serial number retrieval "short-cut"
+ * 2006-01-16 - 0.0.10 jhomppi
+ * - use vendor/product table in adu_probe
+ * - check LINUX_VERSION_CODE for version of linux kernel
+ * and utilize appropriate termination of transfer
+ * 2005-12-02 - 0.0.9 jhomppi
+ * - pre-stage an input read URB to catch first read operation
+ * 2005-11-21 - 0.0.8 jhomppi
+ * - add ADU120,ADU130,ADU208,ADU218 to supported device list
+ * 2005-11-20 - 0.0.7 jhomppi
+ * - remove references to URB_ASYNC_UNLINK
+ * - add MODULE_LICENSE macro to identify our license to kernel
+ * 2005-09-20 - 0.0.6 jhomppi
+ * - replace deprecated usb_unlink_urb with usb_kill_urb
+ * 2003-12-23 - 0.0.5 jhomppi
+ * - urb after each read and write
+ * 2003-12-02 - 0.0.4 jhomppi
+ * - replace urb_submitted with urb status==-EINPROGRESS to stay
+ * in synch with real urb state
+ * - allow multiple open handles to the same device (now that
+ * urb_submitted problem has been removed)
+ * 2003-11-28 - 0.0.3 jhomppi
+ * - applied more changes suggested by Oliver Neukum
+ * - pre-start read if a buffer is available
+ * - correct the location of spin_unlock at end of a read
+ * - added hack to return serial number to caller if read buffer
+ * starts with an 's' (allows serial# retrieval without ioctl)
+ * - check that udev was not nuked by an early disconnect
+ * (ie. check for a null dev->udev in adu_abort_transfers)
+ * - increase scope of lock_irqsave in adu_read so that
+ * urb_submitted is protected versus the interrupt_in_callback
+ * - use down_interruptible where appropriate to prevent locking
+ * driver module into memory forever
+ * 2003-11-27 - 0.0.2 jhomppi
+ * - applied changes suggested by Oliver Neukum to add
+ * spin locks and double buffering to adu_interrupt_in_callback
+ * 2003-11-25 - 0.0.1 jhomppi
+ * - copied from the Lego Tower USB driver for Kernel 2.6.0
+ * - modified to support ADU devices (basically changed only
+ * the names and constants)
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/smp_lock.h>
+#include <linux/completion.h>
+#include <asm/uaccess.h>
+#include <linux/usb.h>
+#include <linux/version.h>
+
+#ifdef CONFIG_USB_DEBUG
+static int debug = 5;
+#else
+static int debug = 1;
+#endif
+
+/* Use our own dbg macro */
+#undef dbg
+#define dbg(lvl, format, arg...) do { if (debug >= lvl) printk
(KERN_DEBUG __FILE__ " : " format " \n", ## arg); } while (0)
+
+
+/* Version Information */
+#define DRIVER_VERSION "v0.0.13"
+#define DRIVER_AUTHOR "John Homppi"
+#define DRIVER_DESC "driver - adutux (see www.ontrak.net)"
+
+/* Module parameters */
+module_param(debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug enabled or not");
+
+/* Define these values to match your device */
+#define ADU_VENDOR_ID 0x0a07
+#define ADU_PRODUCT_ID 0x0064
+
+/* table of devices that work with this driver */
+static struct usb_device_id device_table [] = {
+{ USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID) }, /* ADU100 */
+{ USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+20) }, /* ADU120 */
+{ USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+30) }, /* ADU130 */
+{ USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+100) }, /* ADU200 */
+{ USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+108) }, /* ADU208 */
+{ USB_DEVICE(ADU_VENDOR_ID, ADU_PRODUCT_ID+118) }, /* ADU218 */
+{ }/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE (usb, device_table);
+
+/* FIXME: Get a minor range for your devices from the usb maintainer */
+#define ADU_MINOR_BASE 0xB3 /* HEY! this belongs to the Lego guys!! */
+
+/* we can have up to this number of device plugged in at once */
+#define MAX_DEVICES 16
+
+#define COMMAND_TIMEOUT (2*HZ) /* 60 second timeout for a
command */
+
+/* Structure to hold all of our device specific stuff */
+struct adu_device {
+ struct semaphore sem; /* locks this structure */
+ struct usb_device* udev; /* save off the usb device pointer */
+ struct usb_interface* interface;
+ unsigned char minor; /* the starting minor number for this
device */
+ char serial_number[8];
+
+ int open_count; /* number of times this port has
been opened */
+
+ char* read_buffer_primary;
+ int read_buffer_length;
+ char* read_buffer_secondary;
+ int secondary_head;
+ int secondary_tail;
+ spinlock_t buflock;
+
+ wait_queue_head_t read_wait;
+ wait_queue_head_t write_wait;
+
+ char* interrupt_in_buffer;
+ struct usb_endpoint_descriptor* interrupt_in_endpoint;
+ struct urb* interrupt_in_urb;
+ int read_urb_finished;
+
+ char* interrupt_out_buffer;
+ struct usb_endpoint_descriptor* interrupt_out_endpoint;
+ struct urb* interrupt_out_urb;
+};
+
+/* prevent races between open() and disconnect */
+static DECLARE_MUTEX (disconnect_sem);
+
+/* local function prototypes */
+static ssize_t adu_read (struct file *file, char *buffer, size_t
count, loff_t *ppos);
+static ssize_t adu_write (struct file *file, const char *buffer,
size_t count, loff_t *ppos);
+static int adu_ioctl (struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg);
+static inline void adu_delete (struct adu_device *dev);
+static int adu_open(struct inode *inode, struct file *file);
+static int adu_release(struct inode *inode, struct file *file);
+static int adu_release_internal (struct adu_device *dev);
+static void adu_abort_transfers (struct adu_device *dev);
+static void adu_interrupt_in_callback (struct urb *urb, struct
pt_regs *regs);
+static void adu_interrupt_out_callback (struct urb *urb, struct
pt_regs *regs);
+
+static int adu_probe (struct usb_interface *interface, const struct
usb_device_id *id);
+static void adu_disconnect (struct usb_interface *interface);
+
+/* file operations needed when we register this driver */
+static struct file_operations adu_fops = {
+ .owner = THIS_MODULE,
+ .read = adu_read,
+ .write = adu_write,
+ .ioctl = adu_ioctl,
+ .open = adu_open,
+ .release = adu_release,
+};
+
+/*
+ * usb class driver info in order to get a minor number from the usb
core,
+ * and to have the device registered with devfs and the driver core
+ */
+static struct usb_class_driver adu_class = {
+ .name = "usb/adutux%d",
+ .fops = &adu_fops,
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,15)
+ .mode = S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP | S_IWGRP | S_IROTH,
+#endif
+ .minor_base = ADU_MINOR_BASE,
+};
+
+/* usb specific object needed to register this driver with the usb
subsystem */
+static struct usb_driver adu_driver = {
+ .name = "adutux",
+ .probe = adu_probe,
+ .disconnect = adu_disconnect,
+ .id_table = device_table,
+};
+
+/**
+ * adu_debug_data
+ */
+static inline void adu_debug_data (int level, const char *function,
int size, const unsigned char *data)
+{
+ int i;
+
+ if (debug < level)
+ return;
+
+ printk (KERN_DEBUG __FILE__": %s - length = %d, data = ", function,
size);
+ for (i = 0; i < size; ++i) {
+ printk ("%.2x ", data[i]);
+ }
+ printk ("\n");
+} /* end adu_debug_data */
+
+/**
+ * adu_delete
+ */
+static inline void adu_delete (struct adu_device *dev)
+{
+ dbg(2, "%s enter", __FUNCTION__);
+
+ adu_abort_transfers (dev);
+
+ /* free data structures */
+ if (dev->interrupt_in_urb != NULL) {
+ usb_free_urb (dev->interrupt_in_urb);
+ }
+ if (dev->interrupt_out_urb != NULL) {
+ usb_free_urb (dev->interrupt_out_urb);
+ }
+
+ kfree (dev->read_buffer_primary);
+ kfree (dev->read_buffer_secondary);
+ kfree (dev->interrupt_in_buffer);
+ kfree (dev->interrupt_out_buffer);
+ kfree (dev);
+
+ dbg(2, "%s : leave", __FUNCTION__);
+} /* end adu_delete */
+
+
+/**
+ * adu_open
+ */
+static int adu_open (struct inode *inode, struct file *file)
+{
+ struct adu_device *dev = NULL;
+ struct usb_interface *interface;
+ int subminor;
+ int retval = 0;
+
+ dbg(2,"%s : enter", __FUNCTION__);
+
+ subminor = iminor(inode);
+
+ down (&disconnect_sem); /* not interruptible */
+
+ interface = usb_find_interface (&adu_driver, subminor);
+
+ if (!interface) {
+ err ("%s - error, can't find device for minor %d",
+ __FUNCTION__, subminor);
+ retval = -ENODEV;
+ goto exit_no_device;
+ }
+
+ dev = usb_get_intfdata(interface);
+
+ if (!dev) {
+ retval = -ENODEV;
+ goto exit_no_device;
+ }
+
+ /* lock this device */
+ if ((retval = down_interruptible (&dev->sem))) {
+ int iCount;
+ iCount = atomic_read(&dev->sem.count);
+ dbg(2,"%s : sem down failed, count %d", __FUNCTION__, iCount);
+ goto exit_no_device;
+ }
+
+ /* increment our usage count for the device */
+ ++dev->open_count;
+ dbg(2,"%s : open count %d", __FUNCTION__, dev->open_count);
+
+ /* save device in the file's private structure */
+ file->private_data = dev;
+
+ /* initialize in direction */
+ dev->read_buffer_length = 0;
+
+ /* fixup first read by having urb waiting for it */
+ usb_fill_int_urb (dev->interrupt_in_urb,dev->udev,
+ usb_rcvintpipe(dev->udev,
dev->interrupt_in_endpoint-
>bEndpointAddress),
+ dev->interrupt_in_buffer,
+ dev->interrupt_in_endpoint->wMaxPacketSize,
+ adu_interrupt_in_callback,
+ dev,
+ dev->interrupt_in_endpoint->bInterval);
+ /* dev->interrupt_in_urb->transfer_flags |= URB_ASYNC_UNLINK; */
+ dev->read_urb_finished = 0;
+ usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL);
+ /* we ignore failure */
+ /* end of fixup for first read */
+
+ up (&dev->sem);
+
+exit_no_device:
+
+ up (&disconnect_sem);
+
+ dbg(2,"%s : leave, return value %d ", __FUNCTION__, retval);
+
+ return retval;
+} /* end adu_open */
+
+/**
+ * adu_release
+ */
+static int adu_release (struct inode *inode, struct file *file)
+{
+ struct adu_device *dev = NULL;
+ int retval = 0;
+
+ dbg(2," %s : enter", __FUNCTION__);
+
+ if (file == NULL) {
+ dbg(1," %s : file is NULL", __FUNCTION__);
+ retval = -ENODEV;
+ goto exit;
+ }
+
+ dev = (struct adu_device *)file->private_data;
+
+ if (dev == NULL) {
+ dbg(1," %s : object is NULL", __FUNCTION__);
+ retval = -ENODEV;
+ goto exit;
+ }
+
+
+ /* lock our device */
+ down (&dev->sem); /* not interruptible */
+
+ if (dev->open_count <= 0) {
+ dbg(1," %s : device not opened", __FUNCTION__);
+ retval = -ENODEV;
+ goto exit;
+ }
+
+ /* do the work */
+ retval = adu_release_internal (dev);
+
+exit:
+ up (&dev->sem);
+ dbg(2," %s : leave, return value %d", __FUNCTION__, retval);
+ return retval;
+} /* end adu_release */
+
+
+/**
+ * adu_release_internal
+ */
+static int adu_release_internal (struct adu_device *dev)
+{
+ int retval = 0;
+
+ dbg(2," %s : enter", __FUNCTION__);
+
+ if (dev->udev == NULL) {
+ /* the device was unplugged before the file was released */
+ adu_delete (dev);
+ goto exit;
+ }
+
+ /* decrement our usage count for the device */
+ --dev->open_count;
+ dbg(2," %s : open count %d", __FUNCTION__, dev->open_count);
+ if (dev->open_count <= 0) {
+ adu_abort_transfers (dev);
+ dev->open_count = 0;
+ }
+
+exit:
+ dbg(2," %s : leave", __FUNCTION__);
+ return retval;
+} /* end adu_release_internal */
+
+
+/**
+ * adu_abort_transfers
+ * aborts transfers and frees associated data structures
+ */
+static void adu_abort_transfers (struct adu_device *dev)
+{
+ dbg(2," %s : enter", __FUNCTION__);
+
+ if (dev == NULL) {
+ dbg(1," %s : dev is null", __FUNCTION__);
+ goto exit;
+ }
+
+ if (dev->udev == NULL) {
+ dbg(1," %s : udev is null", __FUNCTION__);
+ goto exit;
+ }
+
+ dbg(2," %s : udev state %d", __FUNCTION__, dev->udev->state);
+ if (dev->udev->state == USB_STATE_NOTATTACHED) {
+ dbg(1," %s : udev is not attached", __FUNCTION__);
+ goto exit;
+ }
+
+ /* shutdown transfer */
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,10)
+ if (dev->interrupt_in_urb != NULL) {
+ usb_unlink_urb (dev->interrupt_in_urb);
+ }
+ if (dev->interrupt_out_urb != NULL) {
+ usb_unlink_urb (dev->interrupt_out_urb);
+ }
+#else
+ if (dev->interrupt_in_urb != NULL) {
+ usb_kill_urb (dev->interrupt_in_urb);
+ }
+ if (dev->interrupt_out_urb != NULL) {
+ usb_kill_urb (dev->interrupt_out_urb);
+ }
+#endif
+
+exit:
+ dbg(2," %s : leave", __FUNCTION__);
+} /* end adu_abort_transfers */
+
+
+/**
+ * adu_read
+ */
+static ssize_t adu_read (struct file *file, char *buffer, size_t
count, loff_t *ppos)
+{
+ struct adu_device *dev;
+ size_t bytes_read = 0;
+ size_t bytes_to_read = count;
+ int i;
+ int retval = 0;
+ int timeout = 0;
+ int should_submit = 0;
+ unsigned long flags;
+ DECLARE_WAITQUEUE(wait, current);
+
+ dbg(2," %s : enter, count = %d, file=&%08x", __FUNCTION__, count,
file);
+
+ dev = (struct adu_device *)file->private_data;
+ dbg(2," %s : dev=%08x", __FUNCTION__, dev);
+ /* lock this object */
+ if (down_interruptible(&dev->sem))
+ return -ERESTARTSYS;
+
+ /* verify that the device wasn't unplugged */
+ if (dev->udev == NULL || dev->minor == 0) {
+ retval = -ENODEV;
+ err("No device or device unplugged %d", retval);
+ goto exit;
+ }
+
+ /* verify that some data was requested */
+ if (count == 0) {
+ dbg(1," %s : read request of 0 bytes", __FUNCTION__);
+ goto exit;
+ }
+
+ timeout = COMMAND_TIMEOUT;
+ dbg(2," %s : about to start looping", __FUNCTION__);
+ while (bytes_to_read) {
+ int data_in_secondary = dev->secondary_tail -
dev->secondary_head;
+ dbg(2," %s : while, data_in_secondary=%d, status=%d",
__FUNCTION__, data_in_secondary,
+ dev->interrupt_in_urb->status);
+ if (data_in_secondary) { /* drain secondary buffer */
+ int amount = bytes_to_read < data_in_secondary ?
bytes_to_read :
data_in_secondary;
+ i = copy_to_user (buffer,
dev->read_buffer_secondary+dev-
>secondary_head, amount);
+ dev->secondary_head += (amount - i);
+ bytes_read += (amount - i);
+ bytes_to_read -= (amount - i);
+ if (i) {
+ retval = bytes_read ? bytes_read : -EFAULT;
+ goto exit;
+ }
+ } else { /* we check the primary buffer */
+ spin_lock_irqsave (&dev->buflock, flags);
+ if (dev->read_buffer_length) { /* we secure access to
the primary */
+ char *tmp;
+ dbg(2," %s : swap, read_buffer_length = %d",
__FUNCTION__, dev-
>read_buffer_length);
+ tmp = dev->read_buffer_secondary;
+ dev->read_buffer_secondary =
dev->read_buffer_primary;
+ dev->read_buffer_primary = tmp;
+ dev->secondary_head = 0;
+ dev->secondary_tail = dev->read_buffer_length;
+ dev->read_buffer_length = 0;
+ spin_unlock_irqrestore (&dev->buflock, flags);
+ should_submit = 1; /* we have a free buffer so
use it */
+ } else { /* even the primary was empty - we may need to
do IO */
+ if (dev->interrupt_in_urb->status ==
-EINPROGRESS) { /*somebody
is doing IO*/
+ spin_unlock_irqrestore (&dev->buflock,
flags);
+ dbg(2," %s : submitted already",
__FUNCTION__);
+ } else { /* we must initiate input */
+ dbg(2," %s : initiate input",
__FUNCTION__);
+ dev->read_urb_finished = 0;
+
+ usb_fill_int_urb
(dev->interrupt_in_urb,dev->udev,
+ usb_rcvintpipe(dev->udev,
dev->interrupt_in_endpoint-
>bEndpointAddress),
+ dev->interrupt_in_buffer,
+
dev->interrupt_in_endpoint->wMaxPacketSize,
+ adu_interrupt_in_callback,
+ dev,
+
dev->interrupt_in_endpoint->bInterval);
+ retval =
usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL);
+ if (!retval) {
+ spin_unlock_irqrestore
(&dev->buflock, flags);
+ dbg(2," %s : submitted OK",
__FUNCTION__);
+ } else {
+ if (retval == -ENOMEM) {
+ retval = bytes_read ?
bytes_read : -ENOMEM;
+ }
+ spin_unlock_irqrestore
(&dev->buflock, flags);
+ dbg(2," %s : submit failed",
__FUNCTION__);
+ goto exit;
+ }
+ }
+
+ /* we wait for I/O to complete */
+ set_current_state(TASK_INTERRUPTIBLE);
+ add_wait_queue(&dev->read_wait, &wait);
+ if (!dev->read_urb_finished) {
+ timeout =
schedule_timeout(COMMAND_TIMEOUT);
+ }
+ else
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(&dev->read_wait, &wait);
+
+ if (timeout <= 0) {
+ dbg(2," %s : timeout", __FUNCTION__);
+ retval = bytes_read ? bytes_read :
-ETIMEDOUT;
+ goto exit;
+ }
+
+ if (signal_pending(current)) {
+ dbg(2," %s : signal pending",
__FUNCTION__);
+ retval = bytes_read ? bytes_read :
-EINTR;
+ goto exit;
+ }
+ }
+ }
+ }
+
+ retval = bytes_read;
+ /* if the primary buffer is empty then use it */
+ if (should_submit && !dev->interrupt_in_urb->status==-EINPROGRESS) {
+ usb_fill_int_urb (dev->interrupt_in_urb,dev->udev,
+ usb_rcvintpipe(dev->udev,
dev->interrupt_in_endpoint-
>bEndpointAddress),
+ dev->interrupt_in_buffer,
+ dev->interrupt_in_endpoint->wMaxPacketSize,
+ adu_interrupt_in_callback,
+ dev,
+ dev->interrupt_in_endpoint->bInterval);
+ /* dev->interrupt_in_urb->transfer_flags |= URB_ASYNC_UNLINK; */
+ dev->read_urb_finished = 0;
+ usb_submit_urb(dev->interrupt_in_urb, GFP_KERNEL);
+ /* we ignore failure */
+ }
+
+ exit:
+ /* unlock the device */
+ up (&dev->sem);
+
+ dbg(2," %s : leave, return value %d", __FUNCTION__, retval);
+ return retval;
+} /* end adu_read */
+
+
+/**
+ * adu_write
+ */
+static ssize_t adu_write (struct file *file, const char *buffer,
size_t count, loff_t *ppos)
+{
+ struct adu_device *dev;
+ size_t bytes_written = 0;
+ size_t bytes_to_write;
+ size_t buffer_size;
+ int retval = 0;
+ int timeout = 0;
+
+ dbg(2," %s : enter, count = %d", __FUNCTION__, count);
+
+ dev = (struct adu_device *)file->private_data;
+
+ /* lock this object */
+ down_interruptible (&dev->sem);
+
+ /* verify that the device wasn't unplugged */
+ if (dev->udev == NULL || dev->minor == 0) {
+ retval = -ENODEV;
+ err("No device or device unplugged %d", retval);
+ goto exit;
+ }
+
+ /* verify that we actually have some data to write */
+ if (count == 0) {
+ dbg(1," %s : write request of 0 bytes", __FUNCTION__);
+ goto exit;
+ }
+
+
+ while (count > 0) {
+ if (dev->interrupt_out_urb->status == -EINPROGRESS) {
+ timeout = COMMAND_TIMEOUT;
+
+ while (timeout > 0) {
+ if (signal_pending(current)) {
+ dbg(1," %s : interrupted", __FUNCTION__);
+ retval = -EINTR;
+ goto exit;
+ }
+ up (&dev->sem);
+ timeout = interruptible_sleep_on_timeout
(&dev->write_wait,
timeout);
+ down_interruptible (&dev->sem);
+ if (timeout > 0) {
+ break;
+ }
+ dbg(1," %s : interrupted timeout: %d", __FUNCTION__,
timeout);
+ }
+
+
+ dbg(1," %s : final timeout: %d", __FUNCTION__, timeout);
+
+ if (timeout == 0) {
+ dbg(1, "%s - command timed out.", __FUNCTION__);
+ retval = -ETIMEDOUT;
+ goto exit;
+ }
+
+ dbg(4," %s : in progress, count = %d", __FUNCTION__, count);
+
+ } else {
+ dbg(4," %s : sending, count = %d", __FUNCTION__, count);
+
+ /* write the data into interrupt_out_buffer from
userspace */
+ buffer_size =
dev->interrupt_out_endpoint->wMaxPacketSize;
+ bytes_to_write = count > buffer_size ? buffer_size :
count;
+ dbg(4," %s : buffer_size = %d, count = %d,
bytes_to_write = %d",
__FUNCTION__, buffer_size, count, bytes_to_write);
+
+ if (copy_from_user (dev->interrupt_out_buffer, buffer,
bytes_to_write) != 0) {
+ retval = -EFAULT;
+ goto exit;
+ }
+
+ /* send off the urb */
+ usb_fill_int_urb(
+ dev->interrupt_out_urb,
+ dev->udev,
+ usb_sndintpipe(dev->udev,
dev->interrupt_out_endpoint-
>bEndpointAddress),
+ dev->interrupt_out_buffer,
+ bytes_to_write,
+ adu_interrupt_out_callback,
+ dev,
+ dev->interrupt_in_endpoint->bInterval);
+ /* dev->interrupt_in_urb->transfer_flags |=
URB_ASYNC_UNLINK; */
+ dev->interrupt_out_urb->actual_length = bytes_to_write;
+ retval = usb_submit_urb (dev->interrupt_out_urb,
GFP_KERNEL);
+
+ if (retval < 0) {
+ err("Couldn't submit interrupt_out_urb %d",
retval);
+ goto exit;
+ }
+
+ buffer += bytes_to_write;
+ count -= bytes_to_write;
+
+ bytes_written += bytes_to_write;
+ }
+ }
+
+ retval = bytes_written;
+
+exit:
+ /* unlock the device */
+ up (&dev->sem);
+
+ dbg(2," %s : leave, return value %d", __FUNCTION__, retval);
+
+ return retval;
+} /* end adu_write */
+
+
+/**
+ * Number of reasons why this isn't supported - GKH doesn't like them
+ * since they are non-portable and also most of this is derived from
+ * proprietary information
+ */
+
+static int adu_ioctl (struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
+{
+ int retval = -ENOTTY; /* default: we don't understand ioctl */
+
+ return retval;
+} /* end adu_ioctl */
+
+
+/**
+ * adu_interrupt_in_callback
+ */
+static void adu_interrupt_in_callback (struct urb *urb, struct
pt_regs *regs)
+{
+ struct adu_device *dev = (struct adu_device *)urb->context;
+
+ dbg(4," %s : enter, status %d", __FUNCTION__, urb->status);
+ adu_debug_data(5,__FUNCTION__, urb->actual_length, urb-
>transfer_buffer);
+
+ spin_lock (&dev->buflock);
+
+ if (urb->status != 0) {
+ if ((urb->status != -ENOENT) && (urb->status != -ECONNRESET)) {
+ dbg(1," %s : nonzero status received: %d",
__FUNCTION__, urb-
>status);
+ }
+ goto exit;
+ }
+
+ if (urb->actual_length > 0 && dev->interrupt_in_buffer[0] != 0x00) {
+ if (dev->read_buffer_length < (4 * dev->interrupt_in_endpoint-
>wMaxPacketSize) - (urb->actual_length)) {
+
+ memcpy
(dev->read_buffer_primary+dev->read_buffer_length, dev-
>interrupt_in_buffer, urb->actual_length);
+
+ dev->read_buffer_length += urb->actual_length;
+ dbg(1," %s reading %d ", __FUNCTION__,
urb->actual_length);
+
+ } else {
+ dbg(1," %s : read_buffer overflow", __FUNCTION__);
+ }
+ }
+
+exit:
+ dev->read_urb_finished = 1;
+ spin_unlock (&dev->buflock);
+ wake_up_interruptible (&dev->read_wait); /* always wake up so we
recover from errors */
+ adu_debug_data(5,__FUNCTION__, urb->actual_length, urb-
>transfer_buffer);
+ dbg(4," %s : leave, status %d", __FUNCTION__, urb->status);
+} /* end adu_interrupt_in_callback */
+
+
+/**
+ * adu_interrupt_out_callback
+ */
+static void adu_interrupt_out_callback (struct urb *urb, struct
pt_regs *regs)
+{
+ struct adu_device *dev = (struct adu_device *)urb->context;
+
+ dbg(4," %s : enter, status %d", __FUNCTION__, urb->status);
+ adu_debug_data(5,__FUNCTION__, urb->actual_length, urb-
>transfer_buffer);
+
+ if (urb->status != 0) {
+ if ((urb->status != -ENOENT) &&
+ (urb->status != -ECONNRESET)) {
+ dbg(1, " %s :nonzero status received: %d",
__FUNCTION__, urb-
>status);
+ }
+ goto exit;
+ }
+
+ wake_up_interruptible(&dev->write_wait);
+exit:
+
+ adu_debug_data(5,__FUNCTION__, urb->actual_length, urb-
>transfer_buffer);
+ dbg(4," %s : leave, status %d", __FUNCTION__, urb->status);
+} /* end adu_interrupt_out_callback */
+
+
+/**
+ * adu_probe
+ *
+ * Called by the usb core when a new device is connected that it thinks
+ * this driver might be interested in.
+ */
+static int adu_probe (struct usb_interface *interface, const struct
usb_device_id *id)
+{
+ struct usb_device *udev = interface_to_usbdev(interface);
+ struct adu_device *dev = NULL;
+ struct usb_host_interface *iface_desc;
+ struct usb_endpoint_descriptor *endpoint;
+ int i;
+ int iSize;
+ int retval = -ENOMEM;
+
+ dbg(2," %s : enter", __FUNCTION__);
+
+ if (udev == NULL) {
+ info ("udev is NULL.");
+ retval = -ENODEV;
+ goto exit;
+ }
+
+ iSize = sizeof(device_table) / sizeof(device_table[0]);
+ for (i = 0; i < iSize; i++) {
+ if ((udev->descriptor.idVendor == device_table[i].idVendor) &&
+ (udev->descriptor.idProduct == device_table[i].idProduct))
+ break;
+ }
+ if (i >= iSize) return -ENODEV;
+
+ /* allocate memory for our device state and intialize it */
+
+ dev = kmalloc (sizeof(struct adu_device), GFP_KERNEL);
+
+ if (dev == NULL) {
+ err ("Out of memory");
+ goto exit;
+ }
+
+ init_MUTEX (&dev->sem);
+ spin_lock_init (&dev->buflock);
+
+ dev->udev = udev;
+ dev->open_count = 0;
+
+ dev->read_buffer_primary = NULL;
+ dev->read_buffer_secondary = NULL;
+ dev->read_buffer_length = 0;
+ dev->secondary_head = 0;
+ dev->secondary_tail = 0;
+
+ init_waitqueue_head (&dev->read_wait);
+ init_waitqueue_head (&dev->write_wait);
+
+ dev->interrupt_in_buffer = NULL;
+ dev->interrupt_in_endpoint = NULL;
+ dev->interrupt_in_urb = NULL;
+ dev->read_urb_finished = 0;
+
+ dev->interrupt_out_buffer = NULL;
+ dev->interrupt_out_endpoint = NULL;
+ dev->interrupt_out_urb = NULL;
+
+
+ iface_desc = &interface->altsetting[0];
+
+ /* set up the endpoint information */
+ for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
+ endpoint = &iface_desc->endpoint[i].desc;
+
+ if (((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) ==
USB_DIR_IN) &&
+ ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
USB_ENDPOINT_XFER_INT)) {
+ dev->interrupt_in_endpoint = endpoint;
+ }
+
+ if (((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) ==
USB_DIR_OUT) &&
+ ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
USB_ENDPOINT_XFER_INT)) {
+ dev->interrupt_out_endpoint = endpoint;
+ }
+ }
+ if(dev->interrupt_in_endpoint == NULL) {
+ err("interrupt in endpoint not found");
+ goto error;
+ }
+ if (dev->interrupt_out_endpoint == NULL) {
+ err("interrupt out endpoint not found");
+ goto error;
+ }
+
+ dev->read_buffer_primary = kmalloc ((4*dev->interrupt_in_endpoint-
>wMaxPacketSize), GFP_KERNEL);
+ if (!dev->read_buffer_primary) {
+ err("Couldn't allocate read_buffer_primary");
+ goto error;
+ }
+
+ // JJH - debug code prime the buffer
+ memset(dev->read_buffer_primary, 'a', dev->interrupt_in_endpoint-
>wMaxPacketSize);
+ memset(dev->read_buffer_primary+dev->interrupt_in_endpoint-
>wMaxPacketSize, 'b',
+ dev->interrupt_in_endpoint->wMaxPacketSize);
+ memset(dev->read_buffer_primary+2*dev->interrupt_in_endpoint-
>wMaxPacketSize, 'c',
+ dev->interrupt_in_endpoint->wMaxPacketSize);
+ memset(dev->read_buffer_primary+3*dev->interrupt_in_endpoint-
>wMaxPacketSize, 'd',
+ dev->interrupt_in_endpoint->wMaxPacketSize);
+
+ dev->read_buffer_secondary = kmalloc ((4*dev->interrupt_in_endpoint-
>wMaxPacketSize), GFP_KERNEL);
+ if (!dev->read_buffer_secondary) {
+ err("Couldn't allocate read_buffer_secondary");
+ goto error;
+ }
+
+ // JJH - debug code prime the buffer
+ memset(dev->read_buffer_secondary, 'e', dev->interrupt_in_endpoint-
>wMaxPacketSize);
+ memset(dev->read_buffer_secondary+dev->interrupt_in_endpoint-
>wMaxPacketSize, 'f',
+ dev->interrupt_in_endpoint->wMaxPacketSize);
+ memset(dev->read_buffer_secondary+2*dev->interrupt_in_endpoint-
>wMaxPacketSize, 'g',
+ dev->interrupt_in_endpoint->wMaxPacketSize);
+ memset(dev->read_buffer_secondary+3*dev->interrupt_in_endpoint-
>wMaxPacketSize, 'h',
+ dev->interrupt_in_endpoint->wMaxPacketSize);
+
+ dev->interrupt_in_buffer = kmalloc (dev->interrupt_in_endpoint-
>wMaxPacketSize, GFP_KERNEL);
+ if (!dev->interrupt_in_buffer) {
+ err("Couldn't allocate interrupt_in_buffer");
+ goto error;
+ }
+
+ // JJH - debug code prime the buffer
+ memset(dev->interrupt_in_buffer, 'i', dev->interrupt_in_endpoint-
>wMaxPacketSize);
+
+ dev->interrupt_in_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!dev->interrupt_in_urb) {
+ err("Couldn't allocate interrupt_in_urb");
+ goto error;
+ }
+ dev->interrupt_out_buffer = kmalloc (dev->interrupt_out_endpoint-
>wMaxPacketSize, GFP_KERNEL);
+ if (!dev->interrupt_out_buffer) {
+ err("Couldn't allocate interrupt_out_buffer");
+ goto error;
+ }
+ dev->interrupt_out_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!dev->interrupt_out_urb) {
+ err("Couldn't allocate interrupt_out_urb");
+ goto error;
+ }
+ memset(dev->serial_number, 0 , sizeof(dev->serial_number));
+ if (!usb_string(udev, udev->descriptor.iSerialNumber, dev-
>serial_number, sizeof(dev->serial_number))){
+ err("Could not retrieve serial number");
+ goto error;
+ }
+ dbg(2," %s : serial_number=%s", __FUNCTION__, dev->serial_number);
+
+ /* initialize the devfs node for this device and register it */
+
+ /* we can register the device now, as it is ready */
+ usb_set_intfdata (interface, dev);
+
+ retval = usb_register_dev (interface, &adu_class);
+
+ if (retval) {
+ /* something prevented us from registering this driver */
+ err ("Not able to get a minor for this device.");
+ usb_set_intfdata (interface, NULL);
+ goto error;
+ }
+
+ dev->minor = interface->minor;
+
+ /* let the user know what node this device is now attached to */
+ info ("ADU%d %s now attached to /dev/usb/adutux%d", udev-
>descriptor.idProduct,
+ dev->serial_number, (dev->minor - ADU_MINOR_BASE));
+exit:
+ dbg(2," %s : leave, return value 0x%.8lx (dev)", __FUNCTION__,
(long) dev);
+
+ return retval;
+
+error:
+ adu_delete(dev);
+ return retval;
+} /* end adu_probe */
+
+/**
+ * adu_disconnect
+ *
+ * Called by the usb core when the device is removed from the system.
+ */
+static void adu_disconnect (struct usb_interface *interface)
+{
+ struct adu_device *dev;
+ int minor;
+
+ dbg(2," %s : enter", __FUNCTION__);
+
+ down (&disconnect_sem); /* not interruptible */
+
+ dev = usb_get_intfdata (interface);
+ usb_set_intfdata (interface, NULL);
+
+ down (&dev->sem); /* not interruptible */
+
+ minor = dev->minor;
+
+ /* give back our minor */
+ usb_deregister_dev (interface, &adu_class);
+ dev->minor = 0; /* no minor active */ // jjh 2003-Nov-29
+
+ /* if the device is not opened, then we clean up right now */
+ dbg(2," %s : open count %d", __FUNCTION__, dev->open_count);
+ if (!dev->open_count) {
+ up (&dev->sem);
+ adu_delete (dev);
+ } else {
+ dev->udev = NULL;
+ up (&dev->sem);
+ }
+
+ up (&disconnect_sem);
+
+ info("ADU device adutux%d now disconnected", (minor -
ADU_MINOR_BASE));
+
+ dbg(2," %s : leave", __FUNCTION__);
+} /* end adu_disconnect */
+
+/**
+ * adu_init
+ */
+static int __init adu_init(void)
+{
+ int result;
+ int retval = 0;
+
+ dbg(2," %s : enter", __FUNCTION__);
+
+ /* register this driver with the USB subsystem */
+ result = usb_register(&adu_driver);
+ if (result < 0) {
+ err("usb_register failed for the "__FILE__" driver. Error
number %
d", result);
+ retval = -1;
+ goto exit;
+ }
+
+ info("adutux " DRIVER_DESC " " DRIVER_VERSION);
+ info("adutux is an experimental driver. Use at your own risk");
+
+exit:
+ dbg(2," %s : leave, return value %d", __FUNCTION__, retval);
+
+ return retval;
+} /* end adu_init */
+
+
+/**
+ * adu_exit
+ */
+static void __exit adu_exit(void)
+{
+ dbg(2," %s : enter", __FUNCTION__);
+
+ /* deregister this driver with the USB subsystem */
+ usb_deregister (&adu_driver);
+
+ dbg(2," %s : leave", __FUNCTION__);
+} /* end adu_exit */
+
+module_init (adu_init);
+module_exit (adu_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff -uprN -X linux-2.6.17.7-vanilla/Documentation/dontdiff
linux-2.6.17.7-vanilla/drivers/usb/misc/Kconfig linux-2.6.17.7/
drivers/usb/misc/Kconfig
--- linux-2.6.17.7-vanilla/drivers/usb/misc/Kconfig 2006-07-25
13:36:01.000000000 +1000
+++ linux-2.6.17.7/drivers/usb/misc/Kconfig 2006-08-07
15:27:11.000000000 +1000
@@ -65,6 +65,13 @@ config USB_LEGOTOWER
The module will be called legousbtower. If you want to compile
it as
a module, say M here and read
<file:Documentation/kbuild/modules.txt>.
+ +
+config USB_ADUTUX
+ tristate "ADU devices from Ontrak Control Systems (EXPERIMENTAL)"
+ depends on USB && EXPERIMENTAL
+ help
+ Say Y if you want to use an ADU device from Ontrak Control Systems.
+ To compile as a module, choose M. The module will be called adutux.
config USB_LCD
tristate "USB LCD driver support"
diff -uprN -X linux-2.6.17.7-vanilla/Documentation/dontdiff
linux-2.6.17.7-vanilla/drivers/usb/misc/Makefile linux-2.6.17.7/
drivers/usb/misc/Makefile
--- linux-2.6.17.7-vanilla/drivers/usb/misc/Makefile 2006-07-25
13:36:01.000000000 +1000
+++ linux-2.6.17.7/drivers/usb/misc/Makefile 2006-08-07
15:27:11.000000000 +1000
@@ -12,6 +12,7 @@ obj-$(CONFIG_USB_LCD) += usblcd.o
obj-$(CONFIG_USB_LD) += ldusb.o
obj-$(CONFIG_USB_LED) += usbled.o
obj-$(CONFIG_USB_LEGOTOWER) += legousbtower.o
+obj-$(CONFIG_USB_ADUTUX) += adutux.o
obj-$(CONFIG_USB_PHIDGETKIT) += phidgetkit.o
obj-$(CONFIG_USB_PHIDGETSERVO) += phidgetservo.o
obj-$(CONFIG_USB_RIO500) += rio500.o
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
