On Fri, 1 Sep 2006 10:12:35 -0400 (EDT)
Alan Stern <[EMAIL PROTECTED]> wrote:
> It seems pretty clear that the UHCI controller hardware on your PCI
> card isn't working. The "len=-8/64" messages are a dead giveaway;
> you can't get a negative length with a timeout failure if the
> controller is working right. At least, not unless you have some
> other USB devices already attached to the same controller and using
> up all the bandwidth.
>
> The fact that it fails in the same way with all the USB devices you
> attach is another indicator that the controller is bad.
Thanks for the answers. :)
There is also a HP Deskjet 5652 attached to the card which is
recognized correctly and works just fine, as long as I do not insert
any USB storage device. Of course the printer is just a USB 1.1 device.
So I've tried without the ehci_hcd module loaded and everything seemed
to work as it should. (Well, sorry for not trying this earlier.) So, at
least the UHCI part seems to work as long as there are no EHCI
'functions' involved.
I'll try to get a new adaptor card then.
Greets,
Jan-Hendrik Zab
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
linux-usb-devel@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
