Begin forwarded message:

Date: Sun, 17 Sep 2006 08:35:32 -0700
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: [Bugme-new] [Bug 7164] New: ehci_hcd fails to init on warm reboot


http://bugzilla.kernel.org/show_bug.cgi?id=7164

           Summary: ehci_hcd fails to init on warm reboot
    Kernel Version: 2.6.17.13 (gentoo 2.6.17-r8)
            Status: NEW
          Severity: normal
             Owner: [EMAIL PROTECTED]
         Submitter: [EMAIL PROTECTED]


Most recent kernel where this bug did not occur: 2.6.15.x
Distribution: Gentoo
Hardware Environment: 
   lspci output:
00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P] System
Controller (rev 11)
00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P] AGP Bridge
00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-766 [ViperPlus] ISA (rev 
02)
00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-766 [ViperPlus] IDE 
(rev 01)
00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-766 [ViperPlus] ACPI (rev 01)
00:07.4 USB Controller: Advanced Micro Devices [AMD] AMD-766 [ViperPlus] USB
(rev 07)
00:09.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 26)
00:0b.0 Ethernet controller: ADMtek NC100 Network Everywhere Fast Ethernet
10/100 (rev 11)
00:0c.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
00:0d.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:0d.1 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:0d.2 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:0d.3 USB Controller: ALi Corporation USB 2.0 Controller (rev 01)
01:05.0 VGA compatible controller: nVidia Corporation NV4 [RIVA TNT] (rev 04)

Dual Athlon MP 1600+ CPUs, 1GB RAM

Problem Description:
00:0d.3 USB Controller: ALi Corporation USB 2.0 Controller (rev 01)
  This is a PCI USB 2.0 card.  On a cold start (system powered off, the ehci_hcd
driver has no problems initializing it.  On a warm start (reboot, shutdown -r
for example) it fails to initialize with the following kernel errors:

ACPI: PCI Interrupt 0000:00:0d.3[A] -> GSI 17 (level, low) -> IRQ 16
ehci_hcd 0000:00:0d.3: EHCI Host Controller
ehci_hcd 0000:00:0d.3: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:0d.3: can't setup
ehci_hcd 0000:00:0d.3: USB bus 5 deregistered
ehci_hcd 0000:00:0d.3: init 0000:00:0d.3 fail, -110
ehci_hcd: probe of 0000:00:0d.3 failed with error -110

------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.

-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
_______________________________________________
linux-usb-devel@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel

Reply via email to