Hey Attempting to connect and use my Nokia 6280 with the supplied Nokia USB cable (reads: 'Type: CA-53') causes the kernel to through BUG's, and has on occasion caused a complete lock up of the system.
This is running 2.6.18, and also occurs on the 2.6.17 series, which was what I was using when I received the phone. I have no idea about kernels before. Linux sara 2.6.18-ARCH #1 SMP PREEMPT Fri Sep 22 12:13:37 CEST 2006 i686 Intel(R) Pentium(R) D CPU 2.80GHz GenuineIntel GNU/Linux Only modification to kernel is the addition of this a patch to add jmicron IDE support, however it still occurs without this patch applied. If i blacklist cdc-ether and cdc-acm, I cannot reproduce the error, and my phone works fine as a usb-storage device. I repeated the following trials to reproduce, each on a fresh boot: 1) Plug phone onto cable, already attached to computer. dmesg shows no recognition of the connection and it's the same as that on a clean boot. 2) Cancel on the phone, or select it's default mode 3) dmesg show's kernel BUG. dmesg after bug is below. If I select USB storage, the phone goes into storage mode fine, however upon leaving the storage mode, it drops back to it's default mode, and causes the above BUG. This seems to be the only BUG i can continually and safely reproduce, the others issues such as hardlocks seem random and sporadic, and have at times occured many minutes after unplugging the phone. Occasionally, it doesnt bug, and I experience a wide range of lockups or problems. I gave up my debugging when, after it entering default mode, all my app's started dying, and would not restart saying my libc.so file was too short, however it was fine after a reboot. The lockups are hard lockups, sysrq is completely ignored. a trace has been output only once upon lockup, which i am attempting to get off the phone in question. Kernel is a stock distro kernel, which has only one patch applied, to add support for a jmicron IDE controller, however removing this does not make a difference. This problem occurs on two different computers: desktop, Asus P5LD2 motherboard, 945P chipset, Pentium D. SMP kernel laptop, Early centrino, pretty sure it's 855 chipset, Pentium M 1.4, SMP distro kernel. I've attempted to CC all the correct people from the maintainer's file, sorry if i have left anyone out or added anyone extra by accident. Thanks for your help, id there's anything you'd like me to try or further information you would like, dont hesitate to ask, im greatful for anything you can do to help. James Below are all the mentioned things in REPORTING-BUGS. Excuse any nvidia mentions in the proc files, nvidia was blacklisted before booting to do the tests and was never loaded for the tests. nor was it loaded in the dmesg below. config is linked as I was unsure whether it was too big. it's a stock distro config so it has nearly everythin. http://archlinux.org/~james/config Linux version 2.6.18-ARCH ([EMAIL PROTECTED]) (gcc version 4.1.1) #1 SMP PREEMPT Fri Sep 22 12:13:37 CEST 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ffa0000 (usable) BIOS-e820: 000000003ffa0000 - 000000003ffae000 (ACPI data) BIOS-e820: 000000003ffae000 - 000000003ffe0000 (ACPI NVS) BIOS-e820: 000000003ffe0000 - 0000000040000000 (reserved) BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) 127MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000ff780 On node 0 totalpages: 262048 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 32672 pages, LIFO batch:7 DMI 2.3 present. ACPI: RSDP (v002 ACPIAM ) @ 0x000fad00 ACPI: XSDT (v001 A M I OEMXSDT 0x05000531 MSFT 0x00000097) @ 0x3ffa0100 ACPI: FADT (v003 A M I OEMFACP 0x05000531 MSFT 0x00000097) @ 0x3ffa0290 ACPI: MADT (v001 A M I OEMAPIC 0x05000531 MSFT 0x00000097) @ 0x3ffa0390 ACPI: OEMB (v001 A M I AMI_OEM 0x05000531 MSFT 0x00000097) @ 0x3ffae040 >>> ERROR: Invalid checksum ACPI: MCFG (v001 A M I OEMMCFG 0x05000531 MSFT 0x00000097) @ 0x3ffa85e0 ACPI: DSDT (v001 A0227 A0227000 0x00000000 INTL 0x02002026) @ 0x00000000 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 15:4 APIC version 20 ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 50000000 (gap: 40000000:bfb80000) Detected 2810.202 MHz processor. Built 1 zonelists. Total pages: 262048 Kernel command line: root=/dev/sda7 elevator=deadline ro mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 1034276k/1048192k available (2256k kernel code, 13180k reserved, 708k data, 228k init, 130688k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 5625.24 BogoMIPS (lpj=11250485) Security Framework v1.0.0 initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000641d 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 0000641d 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfebfbff 20000000 00000000 00000180 0000641d 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (24) available CPU0: Thermal monitoring enabled Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code checking if image is initramfs... it is Freeing initrd memory: 586k freed ACPI: Core revision 20060707 ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. CPU0: Intel(R) Pentium(R) D CPU 2.80GHz stepping 04 SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5620.41 BogoMIPS (lpj=11240835) CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000641d 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 0000641d 00000000 00000000 monitor/mwait feature present. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfebfbff 20000000 00000000 00000180 0000641d 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel P4/Xeon Extended MCE MSRs (24) available CPU1: Thermal monitoring enabled CPU1: Intel(R) Pentium(R) D CPU 2.80GHz stepping 04 Total of 2 processors activated (11245.66 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs migration_cost=641 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=4 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Boot video device is 0000:04:00.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 15 devices SCSI subsystem initialized PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:08: ioport range 0x290-0x297 has been reserved PCI: Bridge: 0000:00:01.0 IO window: e000-efff MEM window: caf00000-cfffffff PREFETCH window: d0000000-dfffffff PCI: Bridge: 0000:00:1c.0 IO window: d000-dfff MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.3 IO window: c000-cfff MEM window: cae00000-caefffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: a000-bfff MEM window: cad00000-cadfffff PREFETCH window: 50000000-500fffff ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.3 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1572864 bytes) TCP bind hash table entries: 65536 (order: 7, 786432 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: disabled - APM is not SMP safe. highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]). Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered (default) io scheduler cfq registered PCI: Setting latency timer of device 0000:00:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:01.0:pcie00] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] PCI: Setting latency timer of device 0000:00:1c.3 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.3:pcie00] Allocate Port Service[0000:00:1c.3:pcie02] ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ACPI: Processor [CPU1] (supports 8 throttling states) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize loop: loaded (max 8 devices) PNP: No PS/2 controller found. Probing ports directly. serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 Starting balanced_irq Using IPI No-Shortcut mode ACPI: (supports S0 S1 S3 S4 S5) Freeing unused kernel memory: 228k freed Time: tsc clocksource has been installed. libata version 2.00 loaded. ata_piix 0000:00:1f.2: version 2.00 ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0x9800 ctl 0x9402 bmdma 0x8400 irq 18 ata2: SATA max UDMA/133 cmd 0x9000 ctl 0x8802 bmdma 0x8408 irq 18 scsi0 : ata_piix ata1.00: ATA-7, max UDMA/133, 312581808 sectors: LBA48 NCQ (depth 0/32) ata1.00: ata1: dev 0 multi count 16 ata1.00: configured for UDMA/133 scsi1 : ata_piix ATA: abnormal status 0x7F on port 0x9007 Vendor: ATA Model: ST3160812AS Rev: 2AAA Type: Direct-Access ANSI SCSI revision: 05 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH7: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 19 ICH7: chipset revision 1 ICH7: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:DMA Probing IDE interface ide0... hdb: HITACHI GD-2000, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 IT8212: IDE controller at PCI slot 0000:01:03.0 ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 20 (level, low) -> IRQ 20 IT8212: chipset revision 17 it821x: controller in pass through mode. IT8212: 100% native mode on irq 20 ide1: BM-DMA at 0xa400-0xa407, BIOS settings: hdc:pio, hdd:pio ide2: BM-DMA at 0xa408-0xa40f, BIOS settings: hde:pio, hdf:pio Probing IDE interface ide1... hdc: PIONEER DVD-RW DVR-111D, ATAPI CD/DVD-ROM drive hdd: ST3200826A, ATA DISK drive ide1 at 0xb800-0xb807,0xb402 on irq 20 Probing IDE interface ide2... SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 < sda5 sda6 sda7 sda8 > sd 0:0:0:0: Attached scsi disk sda hdb: ATAPI 20X DVD-ROM drive, 512kB Cache, DMA Uniform CD-ROM driver Revision: 3.20 hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(66) hdd: max request size: 512KiB hdd: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100) hdd: cache flushes supported hdd: hdd1 hdd2 < hdd5 hdd6 hdd7 hdd8 > EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with journal data mode. usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 20, io base 0x00007000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 21, io base 0x00007400 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 22, io base 0x00007800 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected CSLIP: code copyright 1989 Regents of the University of California ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 17, io base 0x00008000 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 1-1: new low speed USB device using uhci_hcd and address 2 PPP generic driver version 2.4.2 usb 1-1: configuration #1 chosen from 1 choice ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 19 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1b.0 to 64 parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] Linux agpgart interface v0.101 (c) Dave Jones usb 1-2: new full speed USB device using uhci_hcd and address 3 Intel 82802 RNG detected Real Time Clock Driver v1.12ac usb 1-2: configuration #1 chosen from 1 choice hda_codec: Unknown model for ALC882, trying auto-probe from BIOS... usb 2-2: new low speed USB device using uhci_hcd and address 2 agpgart: Detected an Intel 945G Chipset. agpgart: AGP aperture is 256M @ 0x0 Initializing USB Mass Storage driver... usb 2-2: configuration #1 chosen from 1 choice usb 3-2: new low speed USB device using uhci_hcd and address 2 usb 3-2: configuration #1 chosen from 1 choice usbcore: registered new driver hiddev ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 23 (level, low) -> IRQ 18 ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 20, io mem 0xcacff800 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected usb 3-2: USB disconnect, address 2 scsi2 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver usbcore: registered new driver usb-storage USB Mass Storage support registered. ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:02:00.0 to 64 sky2 v1.5 addr 0xcaefc000 irq 17 Yukon-EC (0xb6) rev 2 sky2 eth0: addr 00:13:d4:3f:99:22 usb 1-1: USB disconnect, address 2 lp0: using parport0 (interrupt-driven). usb 1-2: USB disconnect, address 3 ppdev: user-space parallel port driver usb 2-2: USB disconnect, address 2 usb 2-2: new low speed USB device using uhci_hcd and address 3 usb 2-2: configuration #1 chosen from 1 choice input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /class/input/input0 input: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.1-2 EXT3 FS on sda7, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda8, internal journal EXT3-fs: mounted filesystem with journal data mode. usb 1-1: new low speed USB device using uhci_hcd and address 4 kjournald starting. Commit interval 5 seconds EXT3 FS on hdd5, internal journal EXT3-fs: mounted filesystem with writeback data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hdd6, internal journal EXT3-fs: mounted filesystem with writeback data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hdd7, internal journal EXT3-fs: mounted filesystem with writeback data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hdd8, internal journal EXT3-fs: mounted filesystem with writeback data mode. usb 1-1: configuration #1 chosen from 1 choice input: Microsoft Natural(r) Ergonomic Keyboard 4000 as /class/input/input1 input: USB HID v1.11 Keyboard [Microsoft Natural(r) Ergonomic Keyboard 4000] on usb-0000:00:1d.0-1 input: Microsoft Natural(r) Ergonomic Keyboard 4000 as /class/input/input2 input: USB HID v1.11 Device [Microsoft Natural(r) Ergonomic Keyboard 4000] on usb-0000:00:1d.0-1 usb 1-2: new full speed USB device using uhci_hcd and address 5 usb 1-2: configuration #1 chosen from 1 choice scsi3 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 5 usb-storage: waiting for device to settle before scanning usb 3-2: new low speed USB device using uhci_hcd and address 3 usb 3-2: configuration #1 chosen from 1 choice input: Microsoft Microsoft Wireless Optical Mouse(r) 1.0A as /class/input/input3 input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless Optical Mouse(r) 1.0A] on usb-0000:00:1d.2-2 sky2 eth0: enabling interface sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both Vendor: MATSHITA Model: SD-USB-R/W Rev: 0100 Type: Direct-Access ANSI SCSI revision: 04 SCSI device sdb: 29120 512-byte hdwr sectors (15 MB) sdb: Write Protect is off sdb: Mode Sense: 18 00 00 08 sdb: assuming drive cache: write through SCSI device sdb: 29120 512-byte hdwr sectors (15 MB) sdb: Write Protect is off sdb: Mode Sense: 18 00 00 08 sdb: assuming drive cache: write through sdb: sdb1 sd 3:0:0:0: Attached scsi removable disk sdb usb-storage: device scan complete NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver Adding 979924k swap on /dev/sda5. Priority:-1 extents:1 across:979924k i2c /dev entries driver eth0: no IPv6 routers present usb 2-1: new full speed USB device using uhci_hcd and address 4 usb 2-1: configuration #1 chosen from 1 choice drivers/usb/class/cdc-acm.c: Ignoring extra header, type -3, length 4 cdc_acm 2-1:1.1: ttyACM0: USB ACM device usbcore: registered new driver cdc_acm drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters usbcore: registered new driver cdc_ether rndis_host 2-1:1.9: RNDIS init failed, -110 usb%d: unregister 'rndis_host' usb-0000:00:1d.1-1, RNDIS device unregister_netdevice: device usb%d/f6de8000 never was registered ------------[ cut here ]------------ kernel BUG at mm/slab.c:595! invalid opcode: 0000 [#1] PREEMPT SMP Modules linked in: rndis_host cdc_ether usbnet cdc_acm w83627ehf eeprom i2c_isa i2c_dev ipv6 nls_cp437 vfat fat ppdev lp usb_storage snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device usbhid snd_pcm_oss snd_mixer_oss rtc intel_rng i2c_i801 sky2 i2c_core ehci_hcd intel_agp agpgart parport_pc parport snd_hda_intel snd_hda_codec snd_pcm snd_timer snd soundcore joydev ppp_generic slhc snd_page_alloc evdev uhci_hcd serio_raw usbcore ide_disk ide_cd cdrom sd_mod reiserfs ext3 mbcache jbd it821x piix ide_core ata_piix libata CPU: 0 EIP: 0060:[<c0168188>] Not tainted VLI EFLAGS: 00010046 (2.6.18-ARCH #1) EIP is at kfree+0x78/0x90 eax: 80000000 ebx: ffffff92 ecx: f6de8000 edx: c16dbc20 esi: f6de1b92 edi: 00000282 ebp: f6de8400 esp: f6d7bda0 ds: 007b es: 007b ss: 0068 Process modprobe (pid: 3823, ti=f6d7a000 task=c1bc6ab0 task.ti=f6d7a000) Stack: ffffff92 f8a6b920 f8a6b580 f8a6c188 c03aab14 c03aab0c 00000000 00000001 f6d7bde4 c011c918 00000000 00000000 00000003 00000202 f7c0ce00 00000000 f7f60a00 f8a93820 f6de8000 f7942888 f7a66400 dffc4200 f7d3dc80 00000001 Call Trace: [<f8a6b920>] usbnet_start_xmit+0x0/0x200 [usbnet] [<f8a6b580>] usbnet_change_mtu+0x0/0x50 [usbnet] [<f8a6c188>] usbnet_probe+0x2f8/0x620 [usbnet] [<c011c918>] __wake_up+0x38/0x50 [<f88f1b48>] usb_probe_interface+0x68/0xa0 [usbcore] [<c0283184>] driver_probe_device+0x44/0xc0 [<c02832d4>] __driver_attach+0x64/0x70 [<c0282afa>] bus_for_each_dev+0x3a/0x60 [<c02830c6>] driver_attach+0x16/0x20 [<c0283270>] __driver_attach+0x0/0x70 [<c028274c>] bus_add_driver+0x8c/0x140 [<f88f1909>] usb_register_driver+0x89/0x110 [usbcore] [<c01427bd>] sys_init_module+0x15d/0x1ac0 [<c010325d>] sysenter_past_esp+0x56/0x79 Code: 1d 89 74 83 18 40 89 03 57 9d 8b 1c 24 8b 74 24 04 8b 7c 24 08 83 c4 0c c3 8b 52 0c eb c6 89 c8 89 da e8 ac fe ff ff 8b 03 eb d6 <0f> 0b 53 02 b5 4d 35 c0 eb b5 8d b4 26 00 00 00 00 8d bc 27 00 EIP: [<c0168188>] kfree+0x78/0x90 SS:ESP 0068:f6d7bda lsmod before bug: Module Size Used by w83627ehf 12556 0 eeprom 5904 0 i2c_isa 3968 1 w83627ehf i2c_dev 7556 0 ipv6 237472 12 usb_storage 76736 1 nls_cp437 5888 2 vfat 10624 2 fat 45596 1 vfat usbhid 47776 0 snd_seq_oss 29440 0 snd_seq_midi_event 6528 1 snd_seq_oss snd_seq 47184 4 snd_seq_oss,snd_seq_midi_event snd_seq_device 6924 2 snd_seq_oss,snd_seq snd_pcm_oss 39072 0 snd_mixer_oss 14592 2 snd_pcm_oss intel_rng 2688 0 ppdev 7556 0 rtc 10292 0 lp 9604 0 joydev 8256 0 snd_hda_intel 14484 1 snd_hda_codec 146304 1 snd_hda_intel snd_pcm 67972 3 snd_pcm_oss,snd_hda_intel,snd_hda_codec snd_timer 19204 2 snd_seq,snd_pcm snd 42724 9 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_hda_codec,snd_pcm,snd_timer soundcore 7776 2 snd snd_page_alloc 7816 2 snd_hda_intel,snd_pcm intel_agp 19740 1 ppp_generic 24084 0 slhc 6656 1 ppp_generic sky2 35076 0 ehci_hcd 29576 0 agpgart 25944 1 intel_agp i2c_i801 7308 0 serio_raw 5636 0 evdev 7936 0 i2c_core 17280 5 w83627ehf,eeprom,i2c_isa,i2c_dev,i2c_i801 parport_pc 35684 1 parport 31432 3 ppdev,lp,parport_pc uhci_hcd 21004 0 usbcore 110852 5 usb_storage,usbhid,ehci_hcd,uhci_hcd ide_disk 13440 6 ide_cd 35616 0 cdrom 34464 1 ide_cd sd_mod 16640 6 reiserfs 236544 0 ext3 122504 6 mbcache 7044 1 ext3 jbd 55080 1 ext3 it821x 7300 0 [permanent] piix 9220 0 [permanent] ide_core 109256 5 usb_storage,ide_disk,ide_cd,it821x,piix ata_piix 10760 3 libata 85908 1 ata_piix /proc/cpuinfo: processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 4 model name : Intel(R) Pentium(R) D CPU 2.80GHz stepping : 4 cpu MHz : 2810.184 cache size : 1024 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 5 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts a pi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc pni monitor ds_cpl cid cx16 xtpr bogomips : 5625.19 processor : 1 vendor_id : GenuineIntel cpu family : 15 model : 4 model name : Intel(R) Pentium(R) D CPU 2.80GHz stepping : 4 cpu MHz : 2810.184 cache size : 1024 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 5 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts a pi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc pni monitor ds_cpl cid cx16 xtpr bogomips : 5620.39 lspci -vvv as root: 00:00.0 Host bridge: Intel Corporation 945G/P Memory Controller Hub (rev 81) Subsystem: Intel Corporation Unknown device 2580 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Capabilities: [e0] Vendor Specific Information 00:01.0 PCI bridge: Intel Corporation 945G/P PCI Express Graphics Port (rev 81) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size 04 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: caf00000-cfffffff Prefetchable memory behind bridge: 00000000d0000000-00000000dff00000 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- Capabilities: [88] #0d [0000] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [a0] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 2 Link: Latency L0s <256ns, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch- Link: Speed 2.5Gb/s, Width x16 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise- Slot: Number 0, PowerLimit 75.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Off, PwrInd On, Power- Root: Correctable- Non-Fatal- Fatal- PME- 00:1b.0 Class 0403: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01) Subsystem: ASUSTeK Computer Inc. Unknown device 817f Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size 04 Interrupt: pin A routed to IRQ 17 Region 0: Memory at cacf8000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [70] Express Unknown type IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <64ns, L1 <1us Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed unknown, Width x0, ASPM unknown, Port 0 Link: Latency L0s <64ns, L1 <1us Link: ASPM Disabled CommClk- ExtSynch- Link: Speed unknown, Width x0 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size 04 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fff00000-000fffff Prefetchable memory behind bridge: 00000000fff00000-0000000000000000 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [40] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s unlimited, L1 unlimited Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1 Link: Latency L0s <1us, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x1 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+ Slot: Number 1, PowerLimit 0.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Unknown, PwrInd Unknown, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [90] #0d [0000] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size 04 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: cae00000-caefffff Prefetchable memory behind bridge: 00000000fff00000-0000000000000000 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [40] Express Root Port (Slot+) IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s unlimited, L1 unlimited Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 128 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 4 Link: Latency L0s <1us, L1 <4us Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x1 Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+ Slot: Number 4, PowerLimit 0.000000 Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- Slot: AttnInd Unknown, PwrInd Unknown, Power- Root: Correctable- Non-Fatal- Fatal- PME- Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0 Enable- Address: 00000000 Data: 0000 Capabilities: [90] #0d [0000] Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev 01) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Unknown device 8179 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 4: I/O ports at 7000 [size=32] 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev 01) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Unknown device 8179 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at 7400 [size=32] 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev 01) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Unknown device 8179 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin C routed to IRQ 22 Region 4: I/O ports at 7800 [size=32] 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev 01) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Unknown device 8179 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin D routed to IRQ 17 Region 4: I/O ports at 8000 [size=32] 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Unknown device 8179 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 0: Memory at cacff800 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [58] Debug port 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 I/O behind bridge: 0000a000-0000bfff Memory behind bridge: cad00000-cadfffff Prefetchable memory behind bridge: 0000000050000000-0000000050000000 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- Capabilities: [50] #0d [0000] 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) Subsystem: ASUSTeK Computer Inc. Unknown device 8179 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Capabilities: [e0] Vendor Specific Information 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) (prog-if 8a [Master SecP PriP]) Subsystem: ASUSTeK Computer Inc. Unknown device 8179 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at <unassigned> Region 1: I/O ports at <unassigned> Region 2: I/O ports at <unassigned> Region 3: I/O ports at <unassigned> Region 4: I/O ports at ffa0 [size=16] 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) Serial ATA Storage Controllers cc=IDE (rev 01) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: ASUSTeK Computer Inc. Unknown device 2601 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin B routed to IRQ 18 Region 0: I/O ports at 9800 [size=8] Region 1: I/O ports at 9400 [size=4] Region 2: I/O ports at 9000 [size=8] Region 3: I/O ports at 8800 [size=4] Region 4: I/O ports at 8400 [size=16] Region 5: Memory at cacffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: [70] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01) Subsystem: ASUSTeK Computer Inc. Unknown device 8179 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin B routed to IRQ 18 Region 4: I/O ports at 0400 [size=32] 01:02.0 Network controller: RaLink Ralink RT2500 802.11 Cardbus Reference Card (rev 01) Subsystem: Micro-Star International Co., Ltd. Unknown device 6834 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, Cache Line Size 04 Interrupt: pin A routed to IRQ 11 Region 0: Memory at cadde000 (32-bit, non-prefetchable) [size=8K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 01:03.0 Mass storage controller: Integrated Technology Express, Inc. ITE 8211F Single Channel UDMA 133 (ASUS 8211 (ITE IT8212 ATA RAID Controller)) (rev 11) Subsystem: ASUSTeK Computer Inc. Unknown device 8138 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 (2000ns min, 2000ns max) Interrupt: pin A routed to IRQ 20 Region 0: I/O ports at b800 [size=8] Region 1: I/O ports at b400 [size=4] Region 2: I/O ports at b000 [size=8] Region 3: I/O ports at a800 [size=4] Region 4: I/O ports at a400 [size=16] Expansion ROM at 50000000 [disabled] [size=128K] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 Gigabit Ethernet Controller (rev 19) Subsystem: ASUSTeK Computer Inc. Marvell 88E8053 Gigabit Ethernet Controller (Asus) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0, Cache Line Size 04 Interrupt: pin A routed to IRQ 17 Region 0: Memory at caefc000 (64-bit, non-prefetchable) [size=16K] Region 2: I/O ports at c800 [size=256] Expansion ROM at caec0000 [disabled] [size=128K] Capabilities: [48] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME- Capabilities: [50] Vital Product Data Capabilities: [5c] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [e0] Express Legacy Endpoint IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s unlimited, L1 unlimited Device: AtnBtn- AtnInd- PwrInd- Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- Device: MaxPayload 128 bytes, MaxReadReq 512 bytes Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s, Port 0 Link: Latency L0s <256ns, L1 unlimited Link: ASPM Disabled RCB 128 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x1 04:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600 GT] (rev a2) (prog-if 00 [VGA]) Subsystem: Giga-byte Technology Unknown device 3125 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at cc000000 (32-bit, non-prefetchable) [size=64M] Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at cb000000 (64-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at cafe0000 [disabled] [size=128K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [68] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [78] Express Endpoint IRQ 0 Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag- Device: Latency L0s <512ns, L1 <4us Device: AtnBtn- AtnInd- PwrInd- Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported- Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ Device: MaxPayload 128 bytes, MaxReadReq 512 bytes Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0 Link: Latency L0s <1us, L1 <4us Link: ASPM Disabled RCB 128 bytes CommClk- ExtSynch- Link: Speed 2.5Gb/s, Width x16 /proc/iomem: 00000000-0009fbff : System RAM 00000000-00000000 : Crash kernel 0009fc00-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000f0000-000fffff : System ROM 00100000-3ff9ffff : System RAM 00100000-003340cc : Kernel code 003340cd-003e51ff : Kernel data 3ffa0000-3ffadfff : ACPI Tables 3ffae000-3ffdffff : ACPI Non-volatile Storage 3ffe0000-3fffffff : reserved 50000000-500fffff : PCI Bus #01 50000000-5001ffff : 0000:01:03.0 cacf8000-cacfbfff : 0000:00:1b.0 cacf8000-cacfbfff : ICH HD audio cacff800-cacffbff : 0000:00:1d.7 cacff800-cacffbff : ehci_hcd cacffc00-cacfffff : 0000:00:1f.2 cacffc00-cacfffff : libata cad00000-cadfffff : PCI Bus #01 cadde000-caddffff : 0000:01:02.0 cae00000-caefffff : PCI Bus #02 caec0000-caedffff : 0000:02:00.0 caefc000-caefffff : 0000:02:00.0 caefc000-caefffff : sky2 caf00000-cfffffff : PCI Bus #04 cafe0000-caffffff : 0000:04:00.0 cb000000-cbffffff : 0000:04:00.0 cc000000-cfffffff : 0000:04:00.0 cc000000-cfffffff : nvidia d0000000-dfffffff : PCI Bus #04 d0000000-dfffffff : 0000:04:00.0 ffb80000-ffffffff : reserved /proc/ioports: 0000-001f : dma1 0020-0021 : pic1 0040-0043 : timer0 0050-0053 : timer1 0060-006f : keyboard 0070-0077 : rtc 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 01f0-01f7 : ide0 0290-0297 : pnp 00:08 0295-0296 : w83627ehf 0378-037a : parport0 037b-037f : parport0 03c0-03df : vga+ 03f6-03f6 : ide0 03f8-03ff : serial 0400-041f : 0000:00:1f.3 0400-041f : i801_smbus 0778-077a : parport0 0800-0803 : ACPI PM1a_EVT_BLK 0804-0805 : ACPI PM1a_CNT_BLK 0808-080b : ACPI PM_TMR 0810-0815 : ACPI CPU throttle 0820-0820 : ACPI PM2_CNT_BLK 0828-082f : ACPI GPE0_BLK 0cf8-0cff : PCI conf1 7000-701f : 0000:00:1d.0 7000-701f : uhci_hcd 7400-741f : 0000:00:1d.1 7400-741f : uhci_hcd 7800-781f : 0000:00:1d.2 7800-781f : uhci_hcd 8000-801f : 0000:00:1d.3 8000-801f : uhci_hcd 8400-840f : 0000:00:1f.2 8400-840f : libata 8800-8803 : 0000:00:1f.2 8800-8803 : libata 9000-9007 : 0000:00:1f.2 9000-9007 : libata 9400-9403 : 0000:00:1f.2 9400-9403 : libata 9800-9807 : 0000:00:1f.2 9800-9807 : libata a000-bfff : PCI Bus #01 a400-a40f : 0000:01:03.0 a400-a407 : ide1 a408-a40f : ide2 a800-a803 : 0000:01:03.0 b000-b007 : 0000:01:03.0 b400-b403 : 0000:01:03.0 b402-b402 : ide1 b800-b807 : 0000:01:03.0 b800-b807 : ide1 c000-cfff : PCI Bus #02 c800-c8ff : 0000:02:00.0 c800-c8ff : sky2 d000-dfff : PCI Bus #03 e000-efff : PCI Bus #04 ffa0-ffaf : 0000:00:1f.1 ffa0-ffa7 : ide0 -- iphitus - Beyond Maintainer, Arch Trusted User, Arch Developer. Home:iphitus.loudas.com ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel