Am Donnerstag, 8. März 2007 16:55 schrieb Alan Stern:
> Okay, you plugged in a low-speed device. ehci-hcd handed it off to one of
> the OHCI controllers.
Correct. The device is a mouse.
> Now it looks like the auto-stop on usb2 caused a failure on usb3.
Oh, now I see. This failure mode is so strange that I overlooked the
numbers and thought premature suspension is to blame. :-(
> Could it be a memory-mapping error? Both sets of registers got mapped to
> the same address? See what dmesg says when you modprobe ohci-hcd, and do
> a detailed comparison between 2.6.21-rc3 and a working kernel.
I'll try bisecting. This failure is not repeatable easily. Usually it
hangs during boot.
Regards
Oliver
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
