> You haven't provided a clear description of what the problem is. It would
> help to see a dmesg log with CONFIG_USB_DEBUG turned on.
Dear Alan,
just just wanted to ask first before posting dlogs. So here I go with
the details about the problem with the Seagate FreeAgent drives:
1. Boot system (here Intel based Thinkpad T60 and 2.6.21rc7) and
mount ext3 partition on a Seagate FreeAgent external usb drive.
2. Wait some minutes until the Freeagent drive spins down itself
(default standby setup made by Seagate seems to be 15 minutes).
3. Now access the drive and the partition will become read-only. In
my case, I simply did a simple "ls /media/bigst1" command and any
write access will fail after that.
Actually, doing a number of reads will spinup the drive. So doing a
"dd if=/dev/bigst1 of=/dev/zero bs=1024k count=20" before the ls
command will spin up the drive without the partition becoming read-
only.
So here is the dmesg when doing the "ls /media/bigst1":
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command READ_10 (10 bytes)
usb-storage: 28 00 00 00 02 40 00 00 08 00
usb-storage: Bulk Command S 0x43425355 T 0xa6 L 4096 F 128 Trg 0 LUN
0 CL 10
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1
entries
usb-storage: Status code -32; transferred 0/4096
usb-storage: clearing endpoint halt for pipe 0xc0008280
usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000
index=81 len=0
usb-storage: usb_stor_clear_halt: result = 0
usb-storage: Bulk data transfer result 0x2
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0xa6 R 4096 Stat 0x1
usb-storage: -- transport indicates command failure
usb-storage: -- unexpectedly short transfer
usb-storage: Issuing auto-REQUEST_SENSE
usb-storage: Bulk Command S 0x43425355 T 0xa7 L 18 F 128 Trg 0 LUN 0
CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
usb-storage: Status code 0; transferred 18/18
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0xa7 R 0 Stat 0x0
usb-storage: -- Result from auto-sense is 0
usb-storage: -- code: 0x70, key: 0x2, ASC: 0x4, ASCQ: 0x2
usb-storage: Not Ready: Logical unit not ready, initializing command
required
usb-storage: scsi cmd done, result=0x2
usb-storage: *** thread sleeping.
sd 4:0:0:0: Device not ready: <6>: Current: sense key: Not Ready
Additional sense: Logical unit not ready, initializing command
required
end_request: I/O error, dev sdb, sector 576
Buffer I/O error on device dm-0, logical block 64
EXT3-fs error (device dm-0): ext3_readdir: directory #2 contains a
hole at offset 0
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command WRITE_10 (10 bytes)
usb-storage: 2a 00 00 00 00 40 00 00 08 00
usb-storage: Bulk Command S 0x43425355 T 0xa8 L 4096 F 0 Trg 0 LUN 0
CL 10
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1
entries
usb-storage: Status code -32; transferred 1536/4096
usb-storage: clearing endpoint halt for pipe 0xc0008200
usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000
index=01 len=0
usb-storage: usb_stor_clear_halt: result = 0
usb-storage: Bulk data transfer result 0x2
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0xa8 R 4096 Stat 0x1
usb-storage: -- transport indicates command failure
usb-storage: -- unexpectedly short transfer
usb-storage: Issuing auto-REQUEST_SENSE
usb-storage: Bulk Command S 0x43425355 T 0xa9 L 18 F 128 Trg 0 LUN 0
CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
usb-storage: Status code 0; transferred 18/18
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0xa9 R 0 Stat 0x0
usb-storage: -- Result from auto-sense is 0
usb-storage: -- code: 0x70, key: 0x2, ASC: 0x4, ASCQ: 0x2
usb-storage: Not Ready: Logical unit not ready, initializing command
required
usb-storage: scsi cmd done, result=0x2
usb-storage: *** thread sleeping.
sd 4:0:0:0: Device not ready: <6>: Current: sense key: Not Ready
Additional sense: Logical unit not ready, initializing command
required
end_request: I/O error, dev sdb, sector 64
Buffer I/O error on device dm-0, logical block 0
lost page write due to I/O error on dm-0
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command WRITE_10 (10 bytes)
usb-storage: 2a 00 00 00 02 68 00 00 08 00
usb-storage: Bulk Command S 0x43425355 T 0xaa L 4096 F 0 Trg 0 LUN 0
CL 10
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1
entries
usb-storage: Status code -32; transferred 1536/4096
usb-storage: clearing endpoint halt for pipe 0xc0008200
usb-storage: usb_stor_control_msg: rq=01 rqtype=02 value=0000
index=01 len=0
usb-storage: usb_stor_clear_halt: result = 0
usb-storage: Bulk data transfer result 0x2
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0xaa R 4096 Stat 0x1
usb-storage: -- transport indicates command failure
usb-storage: -- unexpectedly short transfer
usb-storage: Issuing auto-REQUEST_SENSE
usb-storage: Bulk Command S 0x43425355 T 0xab L 18 F 128 Trg 0 LUN 0
CL 6
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes
usb-storage: Status code 0; transferred 18/18
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0xab R 0 Stat 0x0
usb-storage: -- Result from auto-sense is 0
usb-storage: -- code: 0x70, key: 0x2, ASC: 0x4, ASCQ: 0x2
usb-storage: Not Ready: Logical unit not ready, initializing command
required
usb-storage: scsi cmd done, result=0x2
usb-storage: *** thread sleeping.
sd 4:0:0:0: Device not ready: <6>: Current: sense key: Not Ready
Additional sense: Logical unit not ready, initializing command
required
end_request: I/O error, dev sdb, sector 616
Buffer I/O error on device dm-0, logical block 69
lost page write due to I/O error on dm-0
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command WRITE_10 (10 bytes)
usb-storage: 2a 00 00 00 02 70 00 00 10 00
usb-storage: Bulk Command S 0x43425355 T 0xac L 8192 F 0 Trg 0 LUN 0
CL 10
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_sglist: xfer 8192 bytes, 2
entries
usb-storage: Status code 0; transferred 8192/8192
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0xac R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command WRITE_10 (10 bytes)
usb-storage: 2a 00 00 00 02 80 00 00 08 00
usb-storage: Bulk Command S 0x43425355 T 0xad L 4096 F 0 Trg 0 LUN 0
CL 10
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1
entries
usb-storage: Status code 0; transferred 4096/4096
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0xad R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
usb-storage: queuecommand called
usb-storage: *** thread awakened.
usb-storage: Command WRITE_10 (10 bytes)
usb-storage: 2a 00 00 00 01 b8 00 00 08 00
usb-storage: Bulk Command S 0x43425355 T 0xae L 4096 F 0 Trg 0 LUN 0
CL 10
usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
usb-storage: Status code 0; transferred 31/31
usb-storage: -- transfer complete
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1
entries
usb-storage: Status code 0; transferred 4096/4096
usb-storage: -- transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
usb-storage: Status code 0; transferred 13/13
usb-storage: -- transfer complete
usb-storage: Bulk status result = 0
usb-storage: Bulk Status S 0x53425355 T 0xae R 0 Stat 0x0
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
In case you need more info, I did upload more logs on:
http://www.colorreference.de/lsusb.txt
http://www.colorreference.de/messages.txt
http://www.colorreference.de/dmesg.txt
Thanks, Wolf
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
linux-usb-devel@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
