On Thu, 21 Jun 2007, Randy Dunlap wrote: > On Thu, 21 Jun 2007 05:28:07 -0700 Andrew Morton wrote: > >>> On Sun, 17 Jun 2007 10:57:55 -0700 (PDT) [EMAIL PROTECTED] wrote: >>> I haven't had time to bisect this, but I'm having a problem on a AMD64 >>> gentoo system where the printer doesn't work with recent kernels. >>> >>> 2.6.18-rc3 worked >>> 2.6.21.1 doesn't >>> 2.6.22-rc4 doesn't >>> >>> unfortunantly the system is gooted on 2.6.18 at the moment and I'm out of >>> town so my ability to test is limited I can provide the 2.6.22-rc4 >>> (attached) and 2.6.18-rc3 configs. >>> >>> dmesg appears to show the port being detected, but writes to the port >>> under newer kernels appear to complete, but no data gets to the printer. >>> >>> any suggestions other then doing the large bisect? >> >> That would be good, thanks. Please be sure to cc linux-usb-devel on >> the results. > > OK, I'm curious about how someone deduced that this is a problem > with a USB printer vs. parallel port printer since the config file has: > > CONFIG_PRINTER=y > CONFIG_USB_PRINTER=y > > The kernel boot log should probably be posted also.
it's a parallel port printer, not a usb printer. when I get home from usenix I'll reboot into a new kernel and post the boot logs for both configs. David Lang ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
