On Thu, 19 Jul 2007, Greg KH wrote: > > Here are some more USB patches and fixes against your 2.6.22 git tree. > > They add a new usb gadget driver, more urb->status cleanups, a new sysfs > attribute to get the raw config of the usb device, and some bugfixes and > documentation updates.
I have a flaky(?) USB multi-card reader, and I just got an oops with it on x86-64. It was preceded by some of the IO errors: end_request: I/O error, dev sdc, sector 0 sd 11:0:0:1: [sdc] Result: hostbyte=0x07 driverbyte=0x00 end_request: I/O error, dev sdc, sector 0 Buffer I/O error on device sdc, logical block 0 usb 2-5: reset high speed USB device using ehci_hcd and address 10 usb 2-5: reset high speed USB device using ehci_hcd and address 10 usb 2-5: reset high speed USB device using ehci_hcd and address 10 usb 2-5: reset high speed USB device using ehci_hcd and address 10 usb 2-5: reset high speed USB device using ehci_hcd and address 10 usb 2-5: reset high speed USB device using ehci_hcd and address 10 usb 2-5: device descriptor read/all, error 0 but the oops itself happened when I then removed the USB device due to the errors, causing this: usb 2-5: USB disconnect, address 10 sd 11:0:0:1: [sdc] Result: hostbyte=0x07 driverbyte=0x00 end_request: I/O error, dev sdc, sector 0 Buffer I/O error on device sdc, logical block 0 sd 11:0:0:1: [sdc] Result: hostbyte=0x07 driverbyte=0x00 end_request: I/O error, dev sdc, sector 0 Buffer I/O error on device sdc, logical block 0 sd 11:0:0:1: [sdc] Result: hostbyte=0x01 driverbyte=0x00 end_request: I/O error, dev sdc, sector 0 Buffer I/O error on device sdc, logical block 0 sd 11:0:0:1: [sdc] Result: hostbyte=0x01 driverbyte=0x00 end_request: I/O error, dev sdc, sector 0 Buffer I/O error on device sdc, logical block 0 sd 11:0:0:1: [sdc] Result: hostbyte=0x01 driverbyte=0x00 end_request: I/O error, dev sdc, sector 0 Buffer I/O error on device sdc, logical block 0 Dev sdc: unable to read RDB block 0 sd 11:0:0:1: [sdc] Result: hostbyte=0x01 driverbyte=0x00 end_request: I/O error, dev sdc, sector 0 Buffer I/O error on device sdc, logical block 0 unable to read partition table sd 11:0:0:1: [sdc] Attached SCSI removable disk sd 11:0:0:1: Attached scsi generic sg3 type 0 usb-storage: device scan complete and finally the oops itself: general protection fault: 0000 [1] SMP CPU 0 Modules linked in: Pid: 214, comm: khubd Not tainted 2.6.22-g20082208 #56 RIP: 0010:[<ffffffff80274670>] [<ffffffff80274670>] kfree+0x27/0x81 RSP: 0018:ffff81012bd0dd90 EFLAGS: 00010212 RAX: 037d001b2d7d01b8 RBX: ffff810001000000 RCX: ffffffff80314f0f RDX: ffff81012337b738 RSI: 037c811b2e7d01b8 RDI: ff241b0cff251c0b RBP: ff241b0cff251c0b R08: ffffffff8062eed0 R09: ffff81012bc0f430 R10: 0000000000000287 R11: ffffffff803ed953 R12: ffff81008642f140 R13: 0000000000000000 R14: 0000000000001540 R15: 0000000000000008 FS: 0000000000000000(0000) GS:ffffffff806a0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 00002b02340410a0 CR3: 000000010bd4b000 CR4: 00000000000006e0 Process khubd (pid: 214, threadinfo ffff81012bd0c000, task ffff81012bed36b0) Stack: ffff81012337b738 ffff81011e9fa800 ffff81008642f140 ffffffff803f50c4 ffff81012337b738 ffff81011e9fa800 ffffffff8064ae70 ffff81011e9fa888 ffff81012ad60978 ffff81012ad60800 ffff81012ad60800 ffffffff803ed96c Call Trace: [<ffffffff803f50c4>] usb_destroy_configuration+0x85/0xee [<ffffffff803ed96c>] usb_release_dev+0x19/0x55 [<ffffffff803140c9>] kobject_cleanup+0x52/0x70 [<ffffffff803140e7>] kobject_release+0x0/0x9 [<ffffffff80314f0f>] kref_put+0x5d/0x68 [<ffffffff803ef78f>] hub_thread+0x390/0xb27 [<ffffffff8023dcb1>] autoremove_wake_function+0x0/0x2e [<ffffffff803ef3ff>] hub_thread+0x0/0xb27 [<ffffffff8023db95>] kthread+0x47/0x76 [<ffffffff8020c0f8>] child_rip+0xa/0x12 [<ffffffff8023db4e>] kthread+0x0/0x76 [<ffffffff8020c0ee>] child_rip+0x0/0x12 Code: 48 8b 06 25 00 40 02 00 48 3d 00 40 02 00 75 04 48 8b 76 10 RIP [<ffffffff80274670>] kfree+0x27/0x81 RSP <ffff81012bd0dd90> Looks like another reference counting bug... Linus ------------------------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now >> http://get.splunk.com/ _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel