This patch (as946) eliminates many of the uses of urb->pipe in
usbcore. Unfortunately there will have to be a significant API
change, affecting all USB drivers, before we can remove it entirely.
This patch contents itself with changing only the interface to
usb_buffer_map_sg() and friends: The pipe argument is replaced with a
direction flag. That can be done easily because those routines get
used in only one place.
Signed-off-by: Alan Stern <[EMAIL PROTECTED]>
---
Index: usb-2.6/drivers/usb/core/hcd.c
===================================================================
--- usb-2.6.orig/drivers/usb/core/hcd.c
+++ usb-2.6/drivers/usb/core/hcd.c
@@ -635,9 +635,9 @@ static int rh_queue_status (struct usb_h
static int rh_urb_enqueue (struct usb_hcd *hcd, struct urb *urb)
{
- if (usb_pipeint (urb->pipe))
+ if (usb_endpoint_xfer_int(&urb->ep->desc))
return rh_queue_status (hcd, urb);
- if (usb_pipecontrol (urb->pipe))
+ if (usb_endpoint_xfer_control(&urb->ep->desc))
return rh_call_control (hcd, urb);
return -EINVAL;
}
@@ -651,7 +651,7 @@ static int usb_rh_urb_dequeue (struct us
{
unsigned long flags;
- if (usb_pipeendpoint(urb->pipe) == 0) { /* Control URB */
+ if (usb_endpoint_num(&urb->ep->desc) == 0) { /* Control URB */
; /* Do nothing */
} else { /* Status URB */
@@ -985,7 +985,7 @@ static void urb_unlink(struct usb_hcd *h
spin_unlock_irqrestore(&hcd_urb_list_lock, flags);
if (hcd->self.uses_dma && !is_root_hub(urb->dev)) {
- if (usb_pipecontrol (urb->pipe)
+ if (usb_endpoint_xfer_control(&urb->ep->desc)
&& !(urb->transfer_flags & URB_NO_SETUP_DMA_MAP))
dma_unmap_single (hcd->self.controller, urb->setup_dma,
sizeof (struct usb_ctrlrequest),
@@ -1068,7 +1068,7 @@ int usb_hcd_submit_urb (struct urb *urb,
* unless it uses pio or talks to another transport.
*/
if (hcd->self.uses_dma) {
- if (usb_pipecontrol (urb->pipe)
+ if (usb_endpoint_xfer_control(&urb->ep->desc)
&& !(urb->transfer_flags & URB_NO_SETUP_DMA_MAP))
urb->setup_dma = dma_map_single (
hcd->self.controller,
@@ -1268,11 +1268,13 @@ rescan:
spin_lock(&hcd_urb_list_lock);
list_for_each_entry (urb, &ep->urb_list, urb_list) {
int tmp;
+ int is_in;
/* the urb may already have been unlinked */
if (urb->status != -EINPROGRESS)
continue;
usb_get_urb (urb);
+ is_in = usb_urb_dir_in(urb);
spin_unlock(&hcd_urb_list_lock);
spin_lock (&urb->lock);
@@ -1283,19 +1285,25 @@ rescan:
/* kick hcd unless it's already returning this */
if (tmp == -EINPROGRESS) {
- tmp = urb->pipe;
unlink1 (hcd, urb);
dev_dbg (hcd->self.controller,
- "shutdown urb %p pipe %08x ep%d%s%s\n",
- urb, tmp, usb_pipeendpoint (tmp),
- (tmp & USB_DIR_IN) ? "in" : "out",
- ({ char *s; \
- switch (usb_pipetype (tmp)) { \
- case PIPE_CONTROL: s = ""; break; \
- case PIPE_BULK: s = "-bulk"; break; \
- case PIPE_INTERRUPT: s = "-intr"; break; \
- default: s = "-iso"; break; \
- }; s;}));
+ "shutdown urb %p ep%d%s%s\n",
+ urb, usb_endpoint_num(&ep->desc),
+ is_in ? "in" : "out",
+ ({ char *s;
+
+ switch (usb_endpoint_type(&ep->desc)) {
+ case USB_ENDPOINT_XFER_CONTROL:
+ s = ""; break;
+ case USB_ENDPOINT_XFER_BULK:
+ s = "-bulk"; break;
+ case USB_ENDPOINT_XFER_INT:
+ s = "-intr"; break;
+ default:
+ s = "-iso"; break;
+ };
+ s;
+ }));
}
usb_put_urb (urb);
Index: usb-2.6/drivers/usb/core/message.c
===================================================================
--- usb-2.6.orig/drivers/usb/core/message.c
+++ usb-2.6/drivers/usb/core/message.c
@@ -59,8 +59,8 @@ static int usb_start_wait_urb(struct urb
dev_dbg(&urb->dev->dev,
"%s timed out on ep%d%s len=%d/%d\n",
current->comm,
- usb_pipeendpoint(urb->pipe),
- usb_pipein(urb->pipe) ? "in" : "out",
+ usb_endpoint_num(&urb->ep->desc),
+ usb_urb_dir_in(urb) ? "in" : "out",
urb->actual_length,
urb->transfer_buffer_length);
} else
@@ -250,7 +250,8 @@ static void sg_clean (struct usb_sg_requ
io->urbs = NULL;
}
if (io->dev->dev.dma_mask != NULL)
- usb_buffer_unmap_sg (io->dev, io->pipe, io->sg, io->nents);
+ usb_buffer_unmap_sg (io->dev, usb_pipein(io->pipe),
+ io->sg, io->nents);
io->dev = NULL;
}
@@ -278,8 +279,8 @@ static void sg_complete (struct urb *urb
dev_err (io->dev->bus->controller,
"dev %s ep%d%s scatterlist error %d/%d\n",
io->dev->devpath,
- usb_pipeendpoint (urb->pipe),
- usb_pipein (urb->pipe) ? "in" : "out",
+ usb_endpoint_num(&urb->ep->desc),
+ usb_urb_dir_in(urb) ? "in" : "out",
status, io->status);
// BUG ();
}
@@ -379,7 +380,8 @@ int usb_sg_init (
*/
dma = (dev->dev.dma_mask != NULL);
if (dma)
- io->entries = usb_buffer_map_sg (dev, pipe, sg, nents);
+ io->entries = usb_buffer_map_sg(dev, usb_pipein(pipe),
+ sg, nents);
else
io->entries = nents;
Index: usb-2.6/drivers/usb/core/usb.c
===================================================================
--- usb-2.6.orig/drivers/usb/core/usb.c
+++ usb-2.6/drivers/usb/core/usb.c
@@ -766,7 +766,7 @@ void usb_buffer_unmap(struct urb *urb)
/**
* usb_buffer_map_sg - create scatterlist DMA mapping(s) for an endpoint
* @dev: device to which the scatterlist will be mapped
- * @pipe: endpoint defining the mapping direction
+ * @is_in: mapping transfer direction
* @sg: the scatterlist to map
* @nents: the number of entries in the scatterlist
*
@@ -789,14 +789,13 @@ void usb_buffer_unmap(struct urb *urb)
*
* Reverse the effect of this call with usb_buffer_unmap_sg().
*/
-int usb_buffer_map_sg(const struct usb_device *dev, unsigned pipe,
+int usb_buffer_map_sg(const struct usb_device *dev, int is_in,
struct scatterlist *sg, int nents)
{
struct usb_bus *bus;
struct device *controller;
if (!dev
- || usb_pipecontrol(pipe)
|| !(bus = dev->bus)
|| !(controller = bus->controller)
|| !controller->dma_mask)
@@ -804,7 +803,7 @@ int usb_buffer_map_sg(const struct usb_d
// FIXME generic api broken like pci, can't report errors
return dma_map_sg(controller, sg, nents,
- usb_pipein(pipe) ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
+ is_in ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
}
/* XXX DISABLED, no users currently. If you wish to re-enable this
@@ -817,14 +816,14 @@ int usb_buffer_map_sg(const struct usb_d
/**
* usb_buffer_dmasync_sg - synchronize DMA and CPU view of scatterlist
buffer(s)
* @dev: device to which the scatterlist will be mapped
- * @pipe: endpoint defining the mapping direction
+ * @is_in: mapping transfer direction
* @sg: the scatterlist to synchronize
* @n_hw_ents: the positive return value from usb_buffer_map_sg
*
* Use this when you are re-using a scatterlist's data buffers for
* another USB request.
*/
-void usb_buffer_dmasync_sg(const struct usb_device *dev, unsigned pipe,
+void usb_buffer_dmasync_sg(const struct usb_device *dev, int is_in,
struct scatterlist *sg, int n_hw_ents)
{
struct usb_bus *bus;
@@ -837,20 +836,20 @@ void usb_buffer_dmasync_sg(const struct
return;
dma_sync_sg(controller, sg, n_hw_ents,
- usb_pipein(pipe) ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
+ is_in ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
}
#endif
/**
* usb_buffer_unmap_sg - free DMA mapping(s) for a scatterlist
* @dev: device to which the scatterlist will be mapped
- * @pipe: endpoint defining the mapping direction
+ * @is_in: mapping transfer direction
* @sg: the scatterlist to unmap
* @n_hw_ents: the positive return value from usb_buffer_map_sg
*
* Reverses the effect of usb_buffer_map_sg().
*/
-void usb_buffer_unmap_sg(const struct usb_device *dev, unsigned pipe,
+void usb_buffer_unmap_sg(const struct usb_device *dev, int is_in,
struct scatterlist *sg, int n_hw_ents)
{
struct usb_bus *bus;
@@ -863,7 +862,7 @@ void usb_buffer_unmap_sg(const struct us
return;
dma_unmap_sg(controller, sg, n_hw_ents,
- usb_pipein(pipe) ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
+ is_in ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
}
/* format to disable USB on kernel command line is: nousb */
Index: usb-2.6/include/linux/usb.h
===================================================================
--- usb-2.6.orig/include/linux/usb.h
+++ usb-2.6/include/linux/usb.h
@@ -1429,13 +1429,13 @@ void usb_buffer_unmap (struct urb *urb);
#endif
struct scatterlist;
-int usb_buffer_map_sg(const struct usb_device *dev, unsigned pipe,
+int usb_buffer_map_sg(const struct usb_device *dev, int is_in,
struct scatterlist *sg, int nents);
#if 0
-void usb_buffer_dmasync_sg(const struct usb_device *dev, unsigned pipe,
+void usb_buffer_dmasync_sg(const struct usb_device *dev, int is_in,
struct scatterlist *sg, int n_hw_ents);
#endif
-void usb_buffer_unmap_sg(const struct usb_device *dev, unsigned pipe,
+void usb_buffer_unmap_sg(const struct usb_device *dev, int is_in,
struct scatterlist *sg, int n_hw_ents);
/*-------------------------------------------------------------------*
-------------------------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc.
Still grepping through log files to find problems? Stop.
Now Search log events and configuration files using AJAX and a browser.
Download your FREE copy of Splunk now >> http://get.splunk.com/
_______________________________________________
linux-usb-devel@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
