> It is a vendor specific protocol. You'll need to ask the manufacturer.
>
Ok, thanks. I send a mail to the manufacturer.
If i get an answer i will post it to the list.
Dirk
> >
> > Yes, i see the device list but i don't see my device (modem Fritz! Card
> > USB
> >
> > v2.0 from AVM).
> >
> > Here are some lines from my proc/bus/usb/devices:
> >
> > T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 11 Spd=12 MxCh= 0
> > D: Ver= 1.01 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 2
> > P: Vendor=057c ProdID=1000 Rev= 2.00
> > S: Manufacturer=AVM Berlin
> > S: Product=FRITZ!Card USB v2.0
> > C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
> > I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> > E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
> > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
> > C: #Ifs= 1 Cfg#= 2 Atr=a0 MxPwr=100mA
> > I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> > E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
> > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
> >
> > The loaded acm module doesn't claimed the device.
> >
> > Any more ideas ?
> >
> > Dirk
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
http://lists.sourceforge.net/lists/listinfo/linux-usb-users
