Hello,
First of all, please excuse me if that problem is already discussed: I
have searched the archive without finding it.
Under 2.4.3 I manage uploading photo from my Digital IXUS using USB_UHCI
with s10h, but under ac series, I don't manage, only other things I have
changed is removing devfs which I don't need in fact...
from dmesg (2.4.3):
...
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.251 $ time 01:30:35 Mar 31 2001
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 7 for device 00:04.2
PCI: The same IRQ used for device 00:06.0
usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 7
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
...
And as I power on my camera:
hub.c: USB new device connect on bus1/1, assigned device number 2
usb.c: USB device 2 (vend/prod 0x4a9/0x3047) is not claimed by any
active driver.
from dmesg (2.4.3-ac7):
...
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.251 $ time 22:57:47 Apr 16 2001
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 7 for device 00:04.2
PCI: The same IRQ used for device 00:06.0
usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 7
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
...
And as I power on my camera:
hub.c: USB new device connect on bus1/1, assigned device number 2
usb_control/bulk_msg: timeout
usb.c: USB device not accepting new address=2 (error=-110)
hub.c: USB new device connect on bus1/1, assigned device number 3
usb_control/bulk_msg: timeout
usb.c: USB device not accepting new address=3 (error=-110)
Before I plug (and power my camera), I have nothing under /proc/bus/usb/
And if I plug and power it, thats don't change (under 2.4.2-ac7), but
the problems is certainly before, as can be seems with dmesg...
I have IRQ sharing:
Greg
CPU0
0: 152838 XT-PIC timer
1: 3700 XT-PIC keyboard
2: 0 XT-PIC cascade
7: 1531410 XT-PIC aic7xxx, usb-uhci
8: 1 XT-PIC rtc
10: 4164 XT-PIC eth0, bttv
11: 515662 XT-PIC saa7146(1)
12: 10709 XT-PIC PS/2 Mouse
14: 6613 XT-PIC ide0
15: 32 XT-PIC ide1
NMI: 0
LOC: 152806
ERR: 0
MIS: 0
But I am forced by my BIOS...
Should I provide other informations?
Thanks you very much,
Greg
________________________________________________________________
http://ulima.unil.ch/greg ICQ:16624071 mailto:[EMAIL PROTECTED]
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
http://lists.sourceforge.net/lists/listinfo/linux-usb-users
