Hi All!
Has taken last CVS for storage of devices and there has found out
long-awaited the driver
for USB-IDE adapter ISD200 from In-System, after small completion inclusions
of my type
of the device in source code, I at last could start the controller, only is
not mine HDD and
naturally not I can anything to make, I bring broad gullies of the results
of action below...
/proc/bus/usb/devices
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=e800
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=e400
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=05ab ProdID=0200 Rev= 1.10
S: Product=USB to IDE Adapter
S: SerialNumber=90617d5b-f120-11d0-bfa3-954eabbbf277
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=ff Driver=usb-storage
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
I: If#= 0 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=ff Driver=usb-storage
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
I: If#= 0 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=ff Driver=usb-storage
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
/proc/bus/usb/drivers
usbdevfs
hub
cpia
usb-storage
/proc/scsi/usb-storage-0/0
Host scsi0: usb-storage
Vendor: In-System
Product: USB to IDE Adapter
Serial Number: 90617D5B-F120-11D0-BFA3-954EABB
Protocol: ISD200 ATA/ATAPI
Transport: Bulk
GUID: 05ab0200ffffffff6954eabb
/proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: Model: Rev:
Type: Direct-Access ANSI SCSI revision: ffffffff
/val/log/messages
Apr 22 00:43:33 home kernel: Initializing USB Mass Storage driver...
Apr 22 00:43:33 home kernel: usb.c: registered new driver usb-storage
Apr 22 00:43:33 home kernel: usb-uhci.c: interrupt, status 2, frame# 1758
Apr 22 00:43:33 home kernel: usb-uhci.c: interrupt, status 3, frame# 1759
Apr 22 00:43:33 home kernel: usb-uhci.c: interrupt, status 3, frame# 1761
Apr 22 00:43:33 home kernel: scsi0 : SCSI emulation for USB Mass Storage
devices
Apr 22 00:43:33 home kernel: Vendor: Model:
Rev:
Apr 22 00:43:33 home kernel: Type: Direct-Access
ANSI SCSI revision: 00
Apr 22 00:43:33 home kernel: Attached scsi disk sda at scsi0, channel 0, id
0, lun 0
Apr 22 00:43:33 home kernel: SCSI device sda: 0 512-byte hdwr sectors (0 MB)
Apr 22 00:43:33 home kernel: USB Mass Storage support registered.
It is everything, that I could receive. The driver ISD200 yet can works or
who can that
already could force it to work?
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
http://lists.sourceforge.net/lists/listinfo/linux-usb-users
