You probably need to load module ide-scsi. That's what I loaded to get
my JAZ (scsi->usb) to work flawlessly every time.
Regards,
Keith B.
Alfredo <[EMAIL PROTECTED]> wrote:
>
>I had a 2.2.19 kernel and I am trying to use the USB support ot connect
>to the JAZ unit.
>
>I had loaded the modules
>
>modprobe usbcore
>modprobe usb-uhci
>modprobe scsi_mod
>modprobe sd_mod
>modprobe usb-storage
>
>the device /proc/bus/usb is there and the mount -t usbdevfs
>/proc/bus/usb /xxxx shows device and driver.
>
>the content of these files is :
>
>T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
>B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
>D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
>P: Vendor=0000 ProdID=0000 Rev= 0.00
>S: Product=USB UHCI Root Hub
>S: SerialNumber=fce0
>C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
>I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
>E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
>T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
>D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
>P: Vendor=059b ProdID=0040 Rev= 1.00
>S: Manufacturer=Iomega
>S: Product=SCSI-to-USB Cable
>S: SerialNumber=04
>C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
>I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50
>Driver=usb-storage
>E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
>E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
> usb-storage
> hub
> usbdevfs
>
>
>under /proc/scsi there is the directory usb/0
>
>the content of this file is:
>
> Host scsi0: usb-storage
> Vendor: Iomega
> Product: SCSI-to-USB Cable
>Serial Number: 04
> Protocol: Transparent SCSI
> Transport: Bulk
> GUID: 059b00400000000000000004
>
>module loaded:
>
>usb-storage 21956 1
>sd_mod 19288 0 (unused)
>scsi_mod 60304 2 [usb-storage sd_mod]
>usb-uhci 19028 0 (unused)
>usbcore 46120 1 [usb-storage usb-uhci]
>
>
>Result
>
>mount -t vfat /dev/sda[0-7] /mnt/jaz
>
>mount: the kernel does not recognize /dev/sda as a block device
> (maybe `insmod driver'?)
>
>I had tried different modules but it does not change the problem.
>
>Any idea ?
>
>Thanks
>
>Alfredo
>
>
>_______________________________________________
>[EMAIL PROTECTED]
>To unsubscribe, use the last form field at:
>http://lists.sourceforge.net/lists/listinfo/linux-usb-users
>
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
http://lists.sourceforge.net/lists/listinfo/linux-usb-users
