Not here they don't. I get identical results with 57600 and 9600.
On Thu, Jul 05, 2001 at 11:07:35PM -0500, [EMAIL PROTECTED] wrote:
> The Keyspan PDA adapter won't work reliably at 115200 because the baud
> rate is outside the tolerance required by the RS-232 standard. It
> might work and it might not work. Other speeds work fine.
>
> -Corey
>
> "Gregory T. Norris" <[EMAIL PROTECTED]> writes:
>
> > That sounds more-or-less like what I'm seeing now with my USA19,
> > currently connected with a Palm serial cradle. There were some other
> > issues as well, but so far I haven't been able to reproduce them under
> > the 2.4.6 kernel.
> >
> > The interesting thing is that every now and then (not often,
> > unfortunately) the keyspan module will log an apparent error uploading
> > the firmware... after which it works *perfectly*! The actual log
> > messages are:
> >
> > usbserial.c: ezusb_set_reset_Re254f24d- 1 failed
> > keyspan.c: ezusb_writememory failed for Keyspanfirmware (-110 0000 e0b4518d 3)
> > usbserial.c: ezusb_set_reset_Re254f24d- 0 failed
> >
> > It occasionally works when the error isn't logged, but much more slowly
> > and with frequent timeouts. I *really* wish I had an idea of how to
> > trigger this error!
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
http://lists.sourceforge.net/lists/listinfo/linux-usb-users
