[Linux-usb-users] can't load uhci module

[Holger Massek]

When I try to install uhci host controller driver module via "modprobe usb-uhci" I always get following error:      init_module: No such device The same result with usb-uhci module. Loading module usb-ohci works fine. But this one doesn't match the requirements of my USB-ISDN adapter (AVM Fritz!X).   my hardware: Toshiba Satellite 320 CDT kernel version: 2.4.4-4GB (SUSE 7.2)   cat /proc/ioports: ------------------------ 0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0070-007f : rtc 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 0280-02ff : cb_enabler 0376-0376 : ide1 03c0-03df : vga+ 03e8-03ef : serial_cs 03f6-03f6 : ide0 03f8-03ff : serial(auto) 0cf8-0cff : PCI conf1 ffe0-ffff : PCI device 1179:0701   cat /proc/interrupts ---------------------------            CPU0         0:     583645          XT-PIC  timer   1:       3490          XT-PIC  keyboard   2:          0          XT-PIC  cascade   3:        248          XT-PIC  eth0   8:          2          XT-PIC  rtc  12:          0          XT-PIC  PS/2 Mouse  14:       3672          XT-PIC  ide0  15:          8          XT-PIC  ide1 NMI:          0 ERR:          0 MIS:          0 Where comes the error message from? And what to do to get the uhci module installed? Has anyone an idea? Thanks   Holger Massek