I'm trying to get USB mass storage to work on my Sony Clie PDA (Sony PEG Mass Storage).
When I use the MSimport application on the PDA to connect to the PC, the Linux kernel does recognize the device, but I can't find a device in order to mount it. /dev/sda, /dev/sdb and /dev/sdc are my SCSI disks on the sym53c8xx controller. /dev/sdd doesn't want to be fdisked: [root@taz usb]# fdisk /dev/sdd Unable to open /dev/sdd /var/log/syslog gives: Nov 28 13:24:32 taz kernel: hub.c: USB new device connect on bus1/2, assigned device number 3 Nov 28 13:24:32 taz kernel: usb.c: USB device 3 (vend/prod 0x54c/0x58) is not claimed by any active driver. Nov 28 13:24:34 taz kernel: Initializing USB Mass Storage driver... Nov 28 13:24:34 taz kernel: usb.c: registered new driver usb-storage Nov 28 13:24:34 taz kernel: scsi1 : SCSI emulation for USB Mass Storage devices Nov 28 13:24:40 taz kernel: usb-uhci.c: interrupt, status 3, frame# 1743 Nov 28 13:24:40 taz kernel: usb.c: USB disconnect on device 3 Nov 28 13:24:40 taz kernel: hub.c: USB new device connect on bus1/2, assigned device number 4 Nov 28 13:24:45 taz kernel: usb-storage: host_reset() requested but not implemented Nov 28 13:24:55 taz ypbind[1414]: broadcast: RPC: Timed out. Nov 28 13:24:55 taz kernel: scsi: device set offline - command error recover failed: host 1 channel 0 id 0 lun 0 Nov 28 13:24:55 taz kernel: WARNING: USB Mass Storage data integrity not assured Nov 28 13:24:55 taz kernel: USB Mass Storage device found at 3 Nov 28 13:24:55 taz kernel: USB Mass Storage support registered. Nov 28 13:24:55 taz kernel: scsi2 : SCSI emulation for USB Mass Storage devices Nov 28 13:25:01 taz kernel: usb-uhci.c: interrupt, status 3, frame# 299 [root@taz scsi]# cat scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: IBM OEM Model: DCHS09W Rev: 2222 Type: Direct-Access ANSI SCSI revision: 02 Host: scsi0 Channel: 00 Id: 01 Lun: 00 Vendor: IBM Model: DDYS-T18350N Rev: S93E Type: Direct-Access ANSI SCSI revision: 03 Host: scsi0 Channel: 00 Id: 02 Lun: 00 Vendor: SEAGATE Model: ST39236LW Rev: 0010 Type: Direct-Access ANSI SCSI revision: 03 Host: scsi2 Channel: 00 Id: 00 Lun: 00 Vendor: Model: Rev: Type: <NULL> ANSI SCSI revision: ffffffff [root@taz scsi]# find . ./usb-storage-1 ./usb-storage-1/2 ./usb-storage-0 ./sym53c8xx ./scsi Am I doing something wrong? _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
