Hello people.
My Acer Travelmate 342T system (Ali: usb-ohci perfectly working) is
a pure SuSE 7.3 with a more-verbose 2.4.10 kernel, and does not
recognize the above device, despite win* do it.
Below are all the debug informations I could collect, hope they might be
useful:
* /proc/bus/usb/devices
---cut
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB OHCI Root Hub
S: SerialNumber=d4a81000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=04ce ProdID=0002 Rev= 2.60
S: Manufacturer=USB to IDE
S: Product=USB to IDE
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
---cut
* /proc/scsi/scsi
---cut
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: Model: Rev:
Type: <NULL> ANSI SCSI revision: ffffffff
---cut
* /proc/scsi/usb-storage-0/0 is empty
* debug messages by usb:
---cut
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-ohci.c: USB OHCI at membase 0xd4a81000, IRQ 10
usb-ohci.c: usb-00:14.0, PCI device 10b9:5237
usb.c: new USB bus registered, assigned bus number 1
usb.c: kmalloc IF c15263e0, numif 1
usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1
usb.c: USB device number 1 default language ID 0x0
Product: USB OHCI Root Hub
SerialNumber: d4a81000
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: standalone hub
hub.c: ganged power switching
hub.c: global over-current protection
hub.c: Port indicators are not supported
hub.c: power on to power good time: 2ms
hub.c: hub controller current requirement: 0mA
hub.c: port removable status: RR
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface c15263e0
usb.c: call_policy add, num 1 -- no FS yet
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
hub.c: port 1, portstatus 101, change 1, 12 Mb/s
..<7>hub.c: port 1, portstatus 103, change 10, 12 Mb/s
hub.c: USB new device connect on bus1/1, assigned device number 2
....<7>usb.c: kmalloc IF c1526c60, numif 1
usb.c: new device strings: Mfr=1, Product=1, SerialNumber=0
usb.c: USB device number 2 default language ID 0x409
.<6>Manufacturer: USB to IDE
Product: USB to IDE
usb.c: unable to get major 180 for usb devices
usb.c: registered new driver usbdevfs
usb.c: deregistering driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.268 $ time 22:08:26 Nov 28 2001
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.268:USB Universal Host Controller Interface driver
---cut
* debug messages by usb-storage:
---cut
usb-storage: act_altsettting is 0
usb-storage: id_index calculated to be: 73
usb-storage: Array length appears to be: 75
usb-storage: USB Mass Storage device detected
usb-storage: Endpoints: In: 0xc1527974 Out: 0xc1527960 Int: 0x00000000
(Period 0.<7>usb-storage: New GUID 04ce00020000000000000000
...............<7>usb-storage: GetMaxLUN command result is 1, data is
0
usb-storage: Transport: Bulk
usb-storage: Protocol: Transparent SCSI
usb-storage: *** thread sleeping.
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command INQUIRY (6 bytes)
usb-storage: 12 00 00 00 ff 00 19 c0 c0 67 50 c1
usb-storage: Bulk command S 0x43425355 T 0x1 Trg 0 LUN 0 L 255 F 128
CL 6
.<7>usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_transfer_partial(): xfer 255 bytes
usb-storage: usb_stor_bulk_msg() returned 0 xferred 255/255
usb-storage: usb_stor_transfer_partial(): transfer complete
usb-storage: Bulk data transfer result 0x0
usb-storage: Attempting to get CSW...
usb-storage: Bulk status result = 0
usb-storage: Bulk status Sig 0x53425355 T 0xff0058 R 0 Stat 0x0
usb-storage: Bulk logical error
usb-storage: Bulk reset requested
usb-storage: command_abort() called
usb-storage: -- nothing to abort
usb-storage: device_reset() called
usb-storage: Bulk reset requested
usb-storage: Bulk soft reset completed
usb-storage: -- transport indicates transport failure
usb-storage: Fixing INQUIRY data to show SCSI rev 2
usb-storage: scsi cmd done, result=0x70000
usb-storage: *** thread sleeping.
usb-storage: Bulk soft reset completed
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command TEST_UNIT_READY (6 bytes)
usb-storage: 00 00 00 00 00 00 19 c0 c0 67 50 c1
usb-storage: Bulk command S 0x43425355 T 0x1 Trg 0 LUN 0 L 0 F 0 CL 6
usb-storage: Bulk command transfer result=0
usb-storage: Attempting to get CSW...
usb-storage: Bulk status result = 0
usb-storage: Bulk status Sig 0x53425355 T 0x50 R 0 Stat 0x0
usb-storage: Bulk logical error
usb-storage: Bulk reset requested
---cut
Any clue?
Thanks,
LC
RIPE Network Coordination Centre <http://www.ripe.net>
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
