Hi,
>From what I've read, the Microtek X6 USB scanner should work with 2.4.7
(RH7.2). However, I've not had any succcess with it yet. Any help would be
appreciated.
When connected, the scanner is recognized. From /var/log/messages:
hub.c: USB new device connect on bus2/1, assigned device number 5
microtek usb (rev 0.4.3): model Scanmaker X6 is not known to be
fully supported, reports welcome!
scsi1 : microtekX6
Vendor: Model: Scanner 636A4 Rev: 1.21
Type: Scanner ANSI SCSI revision: 02
And from /proc/bus/usb/devices:
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=ff(vend.) Sub=03 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=05da ProdID=0099 Rev= 0.00
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=microtekX6
E: Ad=01(O) Atr=02(Bulk) MxPS= 32 Ivl= 0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 32 Ivl= 0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
It looks like the correct modules may be loaded (I'm not sure). lsmod shows:
Module Size Used by
microtek 5680 0 (unused)
es1371 26784 0 (autoclean)
ac97_codec 8768 0 (autoclean) [es1371]
gameport 1808 0 (autoclean) [es1371]
soundcore 4176 4 (autoclean) [es1371]
Mvkbd 824 0 (unused)
Mvgic 3160 0 (unused)
Mvdsp 904 0 (unused)
Mserial 5724 0 (unused)
Mmpip 6796 0 (unused)
Mmerge 127556 0 [Mvnetd Mvnet Mvw Mvmouse Mvkbd Mvgic
Mvdsp Mserial Mmpip]
mki-adapter 21200 0 [Mvnetd Mvnet Mvnetint Mvw Mvmouse
Mvkbd Mvgic Mvdsp Mserial Mmpip Mmerge]
parport_pc 14640 1 (autoclean)
lp 6256 0 (autoclean)
parport 24896 1 (autoclean) [parport_pc lp]
tulip 39136 1
ide-scsi 8128 0
scsi_mod 93104 2 [microtek ide-scsi]
ide-cd 26880 0
cdrom 28512 0 [ide-cd]
usb-uhci 21488 0 (unused)
usbcore 51008 1 [microtek usb-uhci]
Another USB device, a Kodak digital camera does work correctly with this box,
so the hardware itself and some portion of the software is working. Yet,
'scanimage -L' does not find the scanner. Any suggestions?
Thanks,
Mike
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
