Has anyone been successful using a USB-Serial adapter to hook to a serial printer? Specifically I am running a 2.4.5 kernel and trying to use a Belkin FU103 with firmware greater than 2.08.
I first successfully connected the printer to /dev/ttyS0 and it printed fine. I then plugged in the Belkin adapter and the kernel module loaded fine. I then moved the cable from the serial port to the Belkin adapter and fixed the printcap device (set to /dev/ttyUSB0) The when I tried to print the green light came on but the printer reported bad serial transmission and garbage was printed. I verified that the tty setting matched the serial port, they did. I then tried hardware flow control (stty -F /dev/ttyUSB0 crtscts) No change Any ideas? Thanks --Richard _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
