i tried stephan feder's changes (usb-uhci.c and scanner.c), the scanner
works and the modules unload, but i am still getting the same usb-uhci
unload warning i get with the standard modules.
here is output of lspci -v, i dont have lsusb
---
00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x]
(rev c4)
Flags: bus master, medium devsel, latency 8
Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 2.0
Capabilities: [c0] Power Management version 2
00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo
MVP3/Pro133x AGP] (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: dde00000-dfefffff
Prefetchable memory behind bridge: d9c00000-ddcfffff
Capabilities: [80] Power Management version 2
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South]
(rev 22)
Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge
Flags: bus master, stepping, medium devsel, latency 0
00:07.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 10)
(prog-if 8a [Master SecP PriP])
Subsystem: Giga-byte Technology: Unknown device 0571
Flags: bus master, medium devsel, latency 32
I/O ports at ffa0 [size=16]
Capabilities: [c0] Power Management version 2
00:07.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 10) (prog-if 00
[UHCI])
Subsystem: Unknown device 0925:1234
Flags: bus master, medium devsel, latency 64, IRQ 10
I/O ports at d800 [size=32]
Capabilities: [80] Power Management version 2
00:07.3 USB Controller: VIA Technologies, Inc. UHCI USB (rev 10) (prog-if 00
[UHCI])
Subsystem: Unknown device 0925:1234
Flags: bus master, medium devsel, latency 64, IRQ 10
I/O ports at dc00 [size=32]
Capabilities: [80] Power Management version 2
00:07.4 SMBus: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30)
Subsystem: Giga-byte Technology: Unknown device 3057
Flags: medium devsel
Capabilities: [68] Power Management version 2
00:0a.0 Multimedia audio controller: Aureal Semiconductor Vortex 2 (rev fe)
Subsystem: Aureal Semiconductor AU8830 Vortex 3D Digital Audio Processor
Flags: bus master, medium devsel, latency 64, IRQ 9
Memory at dffc0000 (32-bit, non-prefetchable) [size=256K]
I/O ports at d400 [size=8]
I/O ports at d000 [size=8]
Capabilities: [dc] Power Management version 1
00:0b.0 Communication controller: Rockwell International HCF 56k
Data/Fax/Voice/Spkp (w/Handset) Modem (rev 01)
Subsystem: Rockwell International HCF 56k Data/Fax/Voice/Spkp (w/Handset)
Modem
Flags: bus master, medium devsel, latency 64, IRQ 10
Memory at dffb0000 (32-bit, non-prefetchable) [size=64K]
I/O ports at cc00 [size=8]
Capabilities: [40] Power Management version 2
01:00.0 VGA compatible controller: nVidia Corporation Vanta [NV6] (rev 15)
(prog-if 00 [VGA])
Flags: bus master, 66Mhz, medium devsel, latency 248, IRQ 11
Memory at de000000 (32-bit, non-prefetchable) [size=16M]
Memory at da000000 (32-bit, prefetchable) [size=32M]
Expansion ROM at dfef0000 [disabled] [size=64K]
Capabilities: [60] Power Management version 1
Capabilities: [44] AGP version 2.0
---
cheers anyway,
Sam, Ireland
_________________________________________________________________
Send and receive Hotmail on your mobile device: http://mobile.msn.com
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
