Hi everyone.  I'm trying to get my system set up with a USB keyboard and 
mouse but am not having much success.  I've got a HP multimedia USB 
Multimedia Keyboard (device id 0x010c)  and HUB with a USB mouse plugged into 
the keyboard.  The mouse works but the keybaord does not work even though it 
seems to get recognized.  Here are the modules I have loaded (I'm running 
Mandrake 8.1 with 2.4.8-26mdk kernel)

hid                    18480   0  (unused)
mousedev                4192   1
keybdev                 1920   0  (unused)
input                   3648   0  [hid mousedev keybdev]
usb-uhci               21232   0  (unused)
usbcore                50752   1  [hid usb-uhci]

If I unplug the keybaord and the plug it in again the mouse and the keyboard 
both do not work.  Here is what the kernel log says:

Jan 21 15:49:21 hardpint kernel: usb.c: USB disconnect on device 2
Jan 21 15:49:21 hardpint kernel: usb.c: USB disconnect on device 3
Jan 21 15:49:21 hardpint kernel: usb.c: USB disconnect on device 4
Jan 21 15:49:33 hardpint kernel: hub.c: USB new device connect on bus2/1, 
assigned device number 2
Jan 21 15:49:33 hardpint kernel: hub.c: USB hub found
Jan 21 15:49:33 hardpint kernel: hub.c: 3 ports detected
Jan 21 15:49:33 hardpint kernel: hub.c: USB new device connect on bus2/1/1, 
assigned device number 3
Jan 21 15:49:33 hardpint kernel: input0: USB HID v1.00 Keyboard [HP 
Multimedia Keyboard Hub] on usb2:3.0
Jan 21 15:49:33 hardpint kernel: hiddev0: USB HID v1.00 Device [HP Multimedia 
Keyboard Hub] on usb2:3.1
Jan 21 15:49:34 hardpint kernel: usb.c: registered new driver keyboard
Jan 21 15:49:34 hardpint kernel: usbkbd.c: :USB HID Boot Protocol keyboard 
driver
Jan 21 15:49:34 hardpint kernel: hub.c: USB new device connect on bus2/1/2, 
assigned device number 4
Jan 21 15:49:34 hardpint kernel: input1: USB HID v1.00 Mouse [Logitech N48] 
on usb2:4.0
Jan 21 15:49:34 hardpint kernel: usb.c: registered new driver usb_mouse
Jan 21 15:49:34 hardpint kernel: usbmouse.c: v1.6:USB HID Boot Protocol mouse 
driver

I don't know how to figure out what is wrong with it.  I would appreciate any 
help.

Thanks,

Andy


_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users

Reply via email to