Did you read the Linux USB user-guide? Do you have the modules loaded that it suggests?
On Tue, 19 Feb 2002, Ari Steinberg wrote: > Hi, I'm having problems getting a USB Mass Storage Device (a fairly generic > Compact Flash card reader) to work in Linux (Mandrake 8.1 with 2.4.8 kernel). > When devfs is set to mount at bootup, there is no device with the name, > /dev/sd*, while with devfs set to unmount (as was suggested in a posting I > saw on usenet) it has tons of the /dev/sd* devices, but none seem to actually > do anything. When I try to mount any of these devices it says "mount: > special device /dev/sda1 does not exist". > > The device shows up in /proc/scsi/usb-storage-0/1 as: > Host scsi1: usb-storage > Vendor: Unknown > Product: USB Storage Device > Serial Number: None > Protocol: Transparent SCSI > Transport: Bulk > GUID: 05e307000000000000000000 > Attached: 1 > However, it is not listed in /proc/scsi/scsi, which just lists my cd burner. > I have scsi_mod, sd_mod, usb-storage, usb-uhci, usbcore, and ide-scsi all > listed in lsmod (among others of course, but those seem like they might be > relevant). I'm not sure exactly what to look for in /proc/bus/usb/devices, > but here are some of the lines surrounding the line about the usb-storage > device: > I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usb_mouse > E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl= 10ms > T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0 > D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=05e3 ProdID=0700 Rev= 1.13 > C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 96mA > I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage > E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms > T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 0.00 > > I have tried rebooting with the card in the slot but it does not seem to > change anything. Anyone have any ideas? (If you could reply to my e-mail > address in addition to the list that'd be helpful, thanks). > -Ari > > > _______________________________________________ > [EMAIL PROTECTED] > To unsubscribe, use the last form field at: > https://lists.sourceforge.net/lists/listinfo/linux-usb-users > -- /------------------------------------+-------------------------\ |Stephen J. Gowdy | SLAC, MailStop 34, | |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | | | Menlo Park CA 94025, USA | |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | \------------------------------------+-------------------------/ _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
