Device : USB Flash Drive from Transcend, 128MB
OS : SUSE 7.3
>From the boot.msg and /var/log/messages the Drive is correctly
recognised as sdb : sdb1 and is installed properly. There is even a
drive icon on my KDE2 desktop.
/etc/fstab has this line in : /dev/sdb1 /mnt/usbpd vfat
noauto,user 0 0
I created the mount point myself /mnt/usbpd. I've tried vfat and auto
neither work. I've also tried to format the drive as ext2 but the yast2
partion program just crashed!
Mounting is the problem and gives the following messages in
/var/log/messages :-
Mar 7 13:46:03 supermarine kernel: SCSI device (ioctl) reports ILLEGAL
REQUEST.
Mar 7 13:46:03 supermarine kernel: VFS: Disk change detected on device
sd(8,17)
Mar 7 13:46:03 supermarine kernel: SCSI device sdb: 253400 512-byte
hdwr sectors (130 MB)
Mar 7 13:46:03 supermarine kernel: sdb: Write Protect is off
Mar 7 13:46:03 supermarine kernel: sdb: I/O error: dev 08:10, sector 0
Mar 7 13:46:03 supermarine kernel: unable to read partition table
The drive works under Windows ME without a problem.
Can anyone help? or point me in the right direction to find help?
Stephen Griffin
Mar 4 08:11:50 supermarine kernel: usb.c: registered new driver usbdevfs
Mar 4 08:11:50 supermarine kernel: usb.c: registered new driver hub
Mar 4 08:11:50 supermarine kernel: PCI: Setting latency timer of device 00:1f.2 to 64
Mar 4 08:11:50 supermarine kernel: uhci.c: USB UHCI at I/O 0xd000, IRQ 19
Mar 4 08:11:50 supermarine kernel: usb.c: new USB bus registered, assigned bus number
1
Mar 4 08:11:50 supermarine kernel: hub.c: USB hub found
Mar 4 08:11:50 supermarine kernel: hub.c: 2 ports detected
Mar 4 08:11:50 supermarine kernel: PCI: Setting latency timer of device 00:1f.4 to 64
Mar 4 08:11:50 supermarine kernel: uhci.c: USB UHCI at I/O 0xd800, IRQ 23
Mar 4 08:11:50 supermarine kernel: usb.c: new USB bus registered, assigned bus number
2
Mar 4 08:11:50 supermarine kernel: hub.c: USB hub found
Mar 4 08:11:50 supermarine kernel: hub.c: 2 ports detected
Mar 4 08:11:50 supermarine kernel: uhci.c: :USB Universal Host Controller Interface
driver
Mar 4 08:11:50 supermarine kernel: hub.c: USB new device connect on bus1/1, assigned
device number 2
Mar 4 08:11:50 supermarine kernel: usb.c: USB device 2 (vend/prod 0xc76/0x3) is not
claimed by any active driver.
Mar 4 08:11:50 supermarine kernel: IPv6 v0.8 for NET4.0
Mar 4 08:11:50 supermarine kernel: IPv6 over IPv4 tunneling driver
Mar 4 08:11:50 supermarine kernel: Initializing USB Mass Storage driver...
Mar 4 08:11:50 supermarine kernel: usb.c: registered new driver usb-storage
Mar 4 08:11:50 supermarine kernel: scsi2 : SCSI emulation for USB Mass Storage devices
Mar 4 08:11:50 supermarine kernel: Vendor: Model: Rev:
Mar 4 08:11:50 supermarine kernel: Type: Direct-Access ANSI
SCSI revision: 02
Mar 4 08:11:50 supermarine kernel: Attached scsi removable disk sdb at scsi2, channel
0, id 0, lun 0
Mar 4 08:11:50 supermarine kernel: SCSI device sdb: 253400 512-byte hdwr sectors (130
MB)
Mar 4 08:11:50 supermarine kernel: sdb: Write Protect is off
Mar 4 08:11:50 supermarine kernel: sdb: sdb1
Mar 4 08:11:50 supermarine kernel: WARNING: USB Mass Storage data integrity not
assured
Mar 4 08:11:50 supermarine kernel: USB Mass Storage device found at 2
Mar 4 08:11:50 supermarine kernel: USB Mass Storage support registered.
mount /dev/sdb1 gibt dieser meldung :-
Mar 4 11:20:31 supermarine kernel: SCSI device (ioctl) reports ILLEGAL REQUEST.
Mar 4 11:20:31 supermarine kernel: VFS: Disk change detected on device sd(8,17)
Mar 4 11:20:31 supermarine kernel: SCSI device sdb: 253400 512-byte hdwr sectors (130
MB)
Mar 4 11:20:31 supermarine kernel: sdb: Write Protect is off
Mar 4 11:20:31 supermarine kernel: sdb: I/O error: dev 08:10, sector 0
Mar 4 11:20:31 supermarine kernel: unable to read partition table
Inspecting /boot/System.map-2.4.10-4GB
Loaded 11709 symbols from /boot/System.map-2.4.10-4GB.
Symbols match kernel version 2.4.10.
Loaded 130 symbols from 6 modules.
klogd 1.4.1, log source = ksyslog started.
<4>Linux version 2.4.10-4GB ([EMAIL PROTECTED]) (gcc version 2.95.3 20010315
(SuSE)) #1 Fri Sep 28 17:20:21 GMT 2001
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
<4> BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
<4> BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
<4> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
<4>found SMP MP-table at 000f5c10
<4>hm, page 000f5000 reserved twice.
<4>hm, page 000f6000 reserved twice.
<4>hm, page 000f1000 reserved twice.
<4>hm, page 000f2000 reserved twice.
<4>On node 0 totalpages: 131056
<4>zone(0): 4096 pages.
<4>zone(1): 126960 pages.
<4>zone(2): 0 pages.
<4>Intel MultiProcessor Specification v1.1
<4> Virtual Wire compatibility mode.
<4>OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000
<4>Processor #0 Pentium 4(tm) APIC version 17
<4>I/O APIC #2 Version 17 at 0xFEC00000.
<4>Processors: 1
<4>Kernel command line: auto BOOT_IMAGE=linux ro root=306 BOOT_FILE=/boot/vmlinuz
enableapic vga=0x0317 hdc=ide-scsi
<4>ide_setup: hdc=ide-scsi
<6>Initializing CPU#0
<4>Detected 1700.052 MHz processor.
<4>Console: colour dummy device 80x25
<4>Calibrating delay loop... 3394.76 BogoMIPS
<4>Memory: 512884k/524224k available (1289k kernel code, 10952k reserved, 381k data,
124k init, 0k highmem)
<4>Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes)
<4>Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
<4>Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
<4>Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
<4>Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
<7>CPU: Before vendor init, caps: 3febfbff 00000000 00000000, vendor = 0
<6>CPU: L1 I cache: 12K, L1 D cache: 8K
<6>CPU: L2 cache: 256K
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<7>CPU: After vendor init, caps: 3febfbff 00000000 00000000 00000000
<7>CPU: After generic, caps: 3febfbff 00000000 00000000 00000000
<7>CPU: Common caps: 3febfbff 00000000 00000000 00000000
<4>CPU: Intel(R) Pentium(R) 4 CPU 1700MHz stepping 0a
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<4>POSIX conformance testing by UNIFIX
<4>enabled ExtINT on CPU#0
<4>ESR value before enabling vector: 00000000
<4>ESR value after enabling vector: 00000000
<4>ENABLING IO-APIC IRQs
<6>...changing IO-APIC physical APIC ID to 2 ... ok.
<7>init IO_APIC IRQs
<7> IO-APIC (apicid-pin) 2-0, 2-20, 2-21, 2-22 not connected.
<6>..TIMER: vector=0x31 pin1=2 pin2=0
<7>number of MP IRQ sources: 23.
<7>number of IO-APIC #2 registers: 24.
<6>testing the IO APIC.......................
<4>
<7>IO APIC #2......
<7>.... register #00: 02000000
<7>....... : physical APIC id: 02
<7>.... register #01: 00178020
<7>....... : max redirection entries: 0017
<7>....... : IO APIC version: 0020
<4> WARNING: unexpected IO-APIC, please mail
<4> to [EMAIL PROTECTED]
<4> WARNING: unexpected IO-APIC, please mail
<4> to [EMAIL PROTECTED]
<7>.... register #02: 00000000
<7>....... : arbitration: 00
<7>.... IRQ redirection table:
<7> NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
<7> 00 000 00 1 0 0 0 0 0 0 00
<7> 01 001 01 0 0 0 0 0 1 1 39
<7> 02 001 01 0 0 0 0 0 1 1 31
<7> 03 001 01 0 0 0 0 0 1 1 41
<7> 04 001 01 0 0 0 0 0 1 1 49
<7> 05 001 01 0 0 0 0 0 1 1 51
<7> 06 001 01 0 0 0 0 0 1 1 59
<7> 07 001 01 0 0 0 0 0 1 1 61
<7> 08 001 01 0 0 0 0 0 1 1 69
<7> 09 001 01 0 0 0 0 0 1 1 71
<7> 0a 001 01 0 0 0 0 0 1 1 79
<7> 0b 001 01 0 0 0 0 0 1 1 81
<7> 0c 001 01 0 0 0 0 0 1 1 89
<7> 0d 001 01 0 0 0 0 0 1 1 91
<7> 0e 001 01 0 0 0 0 0 1 1 99
<7> 0f 001 01 0 0 0 0 0 1 1 A1
<7> 10 001 01 1 1 0 1 0 1 1 A9
<7> 11 001 01 1 1 0 1 0 1 1 B1
<7> 12 001 01 1 1 0 1 0 1 1 B9
<7> 13 001 01 1 1 0 1 0 1 1 C1
<7> 14 000 00 1 0 0 0 0 0 0 00
<7> 15 000 00 1 0 0 0 0 0 0 00
<7> 16 000 00 1 0 0 0 0 0 0 00
<7> 17 001 01 1 1 0 1 0 1 1 C9
<7>IRQ to pin mappings:
<7>IRQ0 -> 0:2
<7>IRQ1 -> 0:1
<7>IRQ3 -> 0:3
<7>IRQ4 -> 0:4
<7>IRQ5 -> 0:5
<7>IRQ6 -> 0:6
<7>IRQ7 -> 0:7
<7>IRQ8 -> 0:8
<7>IRQ9 -> 0:9
<7>IRQ10 -> 0:10
<7>IRQ11 -> 0:11
<7>IRQ12 -> 0:12
<7>IRQ13 -> 0:13
<7>IRQ14 -> 0:14
<7>IRQ15 -> 0:15
<7>IRQ16 -> 0:16
<7>IRQ17 -> 0:17
<7>IRQ18 -> 0:18
<7>IRQ19 -> 0:19
<7>IRQ23 -> 0:23
<6>.................................... done.
<4>Using local APIC timer interrupts.
<4>calibrating APIC timer ...
<4>..... CPU clock speed is 1699.9715 MHz.
<4>..... host bus clock speed is 99.9982 MHz.
<4>cpu: 0, clocks: 999982, slice: 499991
<4>CPU0<T0:999968,T1:499968,D:9,S:499991,C:999982>
<4>mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
<4>mtrr: detected mtrr type: Intel
<4>PCI: PCI BIOS revision 2.10 entry at 0xfb120, last bus=2
<4>PCI: Using configuration type 1
<4>PCI: Probing PCI hardware
<3>Unknown bridge resource 0: assuming transparent
<3>Unknown bridge resource 2: assuming transparent
<6>PCI: Using IRQ router PIIX [8086/2440] at 00:1f.0
<6>PCI->APIC IRQ transform: (B0,I31,P3) -> 19
<6>PCI->APIC IRQ transform: (B0,I31,P1) -> 17
<6>PCI->APIC IRQ transform: (B0,I31,P2) -> 23
<6>PCI->APIC IRQ transform: (B0,I31,P1) -> 17
<6>PCI->APIC IRQ transform: (B1,I0,P0) -> 16
<6>PCI->APIC IRQ transform: (B2,I0,P0) -> 16
<6>PCI->APIC IRQ transform: (B2,I1,P0) -> 17
<6>PCI->APIC IRQ transform: (B2,I2,P0) -> 18
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<6>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.14)
<4>Starting kswapd
<5>VFS: Diskquotas version dquot_6.5.0 initialized
<6>vesafb: framebuffer at 0xd0000000, mapped to 0xe0800000, size 65536k
<6>vesafb: mode is 1024x768x16, linelength=2048, pages=0
<6>vesafb: protected mode interface info at c000:bb30
<6>vesafb: scrolling: redraw
<6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
<6>Looking for boot splash picture.... found (1024x768, 32431 bytes).
<6>Initializing splash screen... done.
<4>Console: switching to colour frame buffer device 104x34
<6>fb0: VESA VGA frame buffer device
<4>pty: 256 Unix98 ptys configured
<6>Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ
SERIAL_PCI enabled
<6>ttyS00 at 0x03f8 (irq = 4) is a 16550A
<6>ttyS01 at 0x02f8 (irq = 3) is a 16550A
<6>Real Time Clock Driver v1.10e
<4>block: 128 slots per queue, batch=16
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>Uniform Multi-Platform E-IDE driver Revision: 6.31
<4>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<4>PIIX4: IDE controller on PCI bus 00 dev f9
<4>PIIX4: chipset revision 18
<4>PIIX4: not 100%% native mode: will probe irqs later
<4> ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
<4> ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
<4>hda: WDC WD800BB-00BSA0, ATA DISK drive
<4>hdb: IDE DVD-ROM 16X, ATAPI CD/DVD-ROM drive
<4>hdc: CR-48X8TE, ATAPI CD/DVD-ROM drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>ide1 at 0x170-0x177,0x376 on irq 15
<6>hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=9729/255/63, UDMA(100)
<4>hdb: ATAPI 44X DVD-ROM drive, 512kB Cache, UDMA(33)
<6>Uniform CD-ROM driver Revision: 3.12
<4>ide-floppy driver 0.97.sv
<6>Partition check:
<6> hda: hda1 hda2 < hda5 hda6 > hda3 hda4
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<6>loop: loaded (max 8 devices)
<4>ide-floppy driver 0.97.sv
<6>SCSI subsystem driver Revision: 1.00
<3>request_module[scsi_hostadapter]: Root fs not mounted
<3>request_module[scsi_hostadapter]: Root fs not mounted
<6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>md: Autodetecting RAID arrays.
<4>md: autorun ...
<4>md: ... autorun DONE.
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP, IGMP
<4>IP: routing cache hash table of 4096 buckets, 32Kbytes
<4>TCP: Hash tables configured (established 32768 bind 32768)
<6>Linux IP multicast router 0.06 plus PIM-SM
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<5>RAMDISK: Compressed image found at block 0
<4>Uncompressing....................................................done.
<4>Freeing initrd memory: 595k freed
<4>VFS: Mounted root (ext2 filesystem).
<6>scsi0 : SCSI host adapter emulation for IDE ATAPI devices
<4> Vendor: MITSUMI Model: CR-48X8TE Rev: 1.1D
<4> Type: CD-ROM ANSI SCSI revision: 02
<4>Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
<4>sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
<6>0x378: FIFO is 16 bytes
<6>0x378: writeIntrThreshold is 16
<6>0x378: readIntrThreshold is 16
<7>0x378: PWord is 8 bits
<7>0x378: Interrupts are ISA-Pulses
<7>0x378: ECP port cfgA=0x10 cfgB=0x48
<7>0x378: ECP settings irq=7 dma=<none or set by other means>
<6>parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,COMPAT,EPP,ECP]
<6>parport0: irq 7 detected
<7>parport0: cpp_daisy: aa5500ff(98)
<7>parport0: assign_addrs: aa5500ff(98)
<6>parport0: Printer, EPSON Stylus COLOR 600
<4>ppa: Version 2.07 (for Linux 2.4.x)
<4>ppa: Found device at ID 6, Attempting to use EPP 32 bit
<4>ppa: Communication established with ID 6 using EPP 32 bit
<6>scsi1 : Iomega VPI0 (ppa) interface
<4> Vendor: IOMEGA Model: ZIP 100 Rev: D.09
<4> Type: Direct-Access ANSI SCSI revision: 02
<4>Attached scsi removable disk sda at scsi1, channel 0, id 6, lun 0
<4>sda : READ CAPACITY failed.
<4>sda : status = 1, message = 00, host = 0, driver = 08
<4>Current sd00:00: sns = 70 2
<4>ASC=3a ASCQ= 0
<4>Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x11 0x00 0x00 0x00 0x00 0x3a
0x00 0x00 0x00 0x00 0x00 0xff 0xfe 0x01 0x02 0xa5 0x00 0x40
<4>sda : block size assumed to be 512 bytes, disk size 1GB.
<6> sda: I/O error: dev 08:00, sector 0
<4> unable to read partition table
<4>FAT: bogus logical sector size 3198
<4>FAT: bogus logical sector size 3198
<4>reiserfs: checking transaction log (device 03:06) ...
<4>Warning, log replay starting on readonly filesystem
<4>reiserfs: replayed 63 transactions in 2 seconds
<4>Using r5 hash to sort names
<4>reiserfs: using 3.5.x disk format
<4>ReiserFS version 3.6.25
<4>VFS: Mounted root (reiserfs filesystem) readonly.
<4>change_root: old root has d_count=2
<5>Trying to unmount old root ... okay
<4>Freeing unused kernel memory: 124k freed
<6>LVM version 1.0.1-rc2(30/08/2001) module loaded
<6>Device not ready. Make sure there is a disc in the drive.
<7>VFS: Disk change detected on device sd(8,0)
<4>sda : READ CAPACITY failed.
<4>sda : status = 1, message = 00, host = 0, driver = 08
<4>Current sd00:00: sns = 70 2
<4>ASC=3a ASCQ= 0
<4>Raw sense data:0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x11 0x00 0x00 0x00 0x00 0x3a
0x00 0x00 0x00 0x00 0x00 0xff 0xfe 0x01 0x02 0xa5 0x00 0x40
<4>sda : block size assumed to be 512 bytes, disk size 1GB.
<6> sda: I/O error: dev 08:00, sector 0
<4> unable to read partition table
<4>clm-6006: writing inode 3636 on readonly FS
<4>clm-6006: writing inode 3636 on readonly FS
<4>clm-6006: writing inode 3636 on readonly FS
<4>clm-6006: writing inode 3636 on readonly FS
<4>clm-6006: writing inode 3636 on readonly FS
<4>clm-6006: writing inode 3636 on readonly FS
<4>clm-6005: writing inode 3636 on readonly FS
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console) at Thu Mar 7 14:33:48 2002
fbmngplay: no process killed
Run file system check on root for LVM activation
doneRemounting root file system (/) read/write for vgscan...
Scanning for LVM volume groups...
vgscan -- reading all physical volumes (this may take a while...)
vgscan -- "/etc/lvmtab" and "/etc/lvmtab.d" successfully created
vgscan -- WARNING: This program does not do a VGDA backup of your volume group
Activating LVM volume groups...
vgchange -- no volume groups found
Activating swap-devices in /etc/fstab...
doneChecking file systems...
fsck 1.24a (02-Sep-2001)
<-------------reiserfsck, 2001------------->
reiserfsprogs 3.x.0k-pre9
/dev/hda4 was not cleanly unmounted, check forced.
/dev/hda4: |==================== | 35.0%
/dev/hda4: |======================================= / 70.0%
/dev/hda4: |================================================== - 90.0%
/dev/hda4: |==================================================== \ 92.0%
/dev/hda4: |===================================================== | 95.0%
/dev/hda4: |========================================================| 100.0%
/dev/hda4:
31/4016 files (0.0% non-contiguous), 4238/16065 blocks
doneMounting local file systems...
proc on /proc type proc (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/hda4 on /boot type ext2 (rw)
doneActivating remaining swap-devices in /etc/fstab...
doneSetting up the CMOS clockdone
Setting up timezone datadone
Setting up loopback devicedone
Setting up hostnamedone
Mount SHM FS on /dev/shmdone
Configuring serial ports...
ttyS0 at 0x03f8 (irq = 4) is a 16550A
ttyS1 at 0x02f8 (irq = 3) is a 16550A
Configured serial ports
doneRunning /etc/init.d/boot.local
doneCreating /var/log/boot.msg
done<notice>killproc: kill(31,29)
Enabling syn flood protectiondone
Disabling IP forwardingdone
<notice>Boot logging started on /dev/tty1(/dev/console) at Thu Mar 7 13:33:56 2002
Master Resource Control: previous runlevel: N, switching to runlevel: 5
Starting personal-firewall (initial)killproc: kill(31,3)
INIT: Entering runlevel: 5
<notice>/etc/init.d/rc5.d/S01SuSEfirewall_init start
<notice>'/etc/init.d/rc5.d/S01SuSEfirewall_init start' exits with status 0
<notice>/etc/init.d/rc5.d/S01dummy start
<notice>'/etc/init.d/rc5.d/S01dummy start' exits with status 0
<notice>/etc/init.d/rc5.d/S01i4l_hardware start
<notice>'/etc/init.d/rc5.d/S01i4l_hardware start' exits with status 0
<notice>/etc/init.d/rc5.d/S01personal-firewall.initial start
[active]done
<notice>'/etc/init.d/rc5.d/S01personal-firewall.initial start' exits with status 0
<notice>/etc/init.d/rc5.d/S01random start
Initializing random number generatordone
<notice>'/etc/init.d/rc5.d/S01random start' exits with status 0
<notice>/etc/init.d/rc5.d/S02dhclient start
<notice>'/etc/init.d/rc5.d/S02dhclient start' exits with status 0
<notice>/etc/init.d/rc5.d/S02i4l start
<notice>'/etc/init.d/rc5.d/S02i4l start' exits with status 0
<notice>/etc/init.d/rc5.d/S05network start
Setting up network device eth0
done<notice>'/etc/init.d/rc5.d/S05network start' exits with status 0
<notice>/etc/init.d/rc5.d/S06hotplug start
Starting hotplugging services [ usb ]done
<notice>'/etc/init.d/rc5.d/S06hotplug start' exits with status 0
<notice>/etc/init.d/rc5.d/S07route start
<notice>'/etc/init.d/rc5.d/S07route start' exits with status 0
<notice>/etc/init.d/rc5.d/S08SuSEfirewall_setup start
<notice>'/etc/init.d/rc5.d/S08SuSEfirewall_setup start' exits with status 0
<notice>/etc/init.d/rc5.d/S08sshd start
Starting SSH daemon<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd ], [
PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=supermarine CONSOLE=/dev/console vga=0x0317
PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=104
BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux
PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78
_=/sbin/startproc DAEMON=/usr/sbin/sshd ]
done
<notice>'/etc/init.d/rc5.d/S08sshd start' exits with status 0
<notice>/etc/init.d/rc5.d/S08syslog start
Starting syslog services<notice>startproc: execve (/sbin/syslogd) [ /sbin/syslogd ], [
PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=supermarine CONSOLE=/dev/console vga=0x0317
PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=104
BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux
PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78
_=/sbin/startproc DAEMON=/sbin/syslogd ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 ], [ PWD=/
BOOT_FILE=/boot/vmlinuz HOSTNAME=supermarine CONSOLE=/dev/console vga=0x0317
PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=104
BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux
PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78
_=/sbin/startproc DAEMON=/sbin/klogd ]
done
<notice>'/etc/init.d/rc5.d/S08syslog start' exits with status 0
<notice>/etc/init.d/rc5.d/S08xfs start
<notice>'/etc/init.d/rc5.d/S08xfs start' exits with status 0
<notice>/etc/init.d/rc5.d/S09portmap start
Starting RPC portmap daemon<notice>startproc: execve (/sbin/portmap) [ /sbin/portmap
], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=supermarine CONSOLE=/dev/console
vga=0x0317 PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=34 SHLVL=2
COLUMNS=104 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/
TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78
_=/sbin/startproc DAEMON=/sbin/portmap ]
done
<notice>'/etc/init.d/rc5.d/S09portmap start' exits with status 0
<notice>/etc/init.d/rc5.d/S09splash_early start
<notice>'/etc/init.d/rc5.d/S09splash_early start' exits with status 0
<notice>/etc/init.d/rc5.d/S10nfs start
Importing Net File System (NFS)<notice>startproc: execve (/sbin/rpc.statd) [
/sbin/rpc.statd ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=supermarine
CONSOLE=/dev/console vga=0x0317 PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux
LINES=34 SHLVL=2 COLUMNS=104 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386
OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5
INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/sbin/rpc.statd ]
mount: can't get address for server
failed
<notice>'/etc/init.d/rc5.d/S10nfs start' exits with status 1
<notice>/etc/init.d/rc5.d/S11apmd start
<notice>'/etc/init.d/rc5.d/S11apmd start' exits with status 0
<notice>/etc/init.d/rc5.d/S11at start
Starting service at daemon:<notice>startproc: execve (/usr/sbin/atd) [ /usr/sbin/atd
], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=supermarine CONSOLE=/dev/console
vga=0x0317 PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=34 SHLVL=2
COLUMNS=104 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/
TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78
_=/sbin/startproc DAEMON=/usr/sbin/atd ]
done
<notice>'/etc/init.d/rc5.d/S11at start' exits with status 0
<notice>/etc/init.d/rc5.d/S11fbset start
<notice>'/etc/init.d/rc5.d/S11fbset start' exits with status 0
<notice>/etc/init.d/rc5.d/S11kbd start
Loading keymap qwerty/us.map.gz
doneLoading compose table winkeys shiftctrl latin1.adddone
Loading console font lat1-16.psfu
doneSetting up console ttys
done<notice>'/etc/init.d/rc5.d/S11kbd start' exits with status 0
<notice>/etc/init.d/rc5.d/S11lpd start
Starting lpd<notice>startproc: execve (/usr/sbin/lpd) [ /usr/sbin/lpd ], [ PWD=/
BOOT_FILE=/boot/vmlinuz HOSTNAME=supermarine CONSOLE=/dev/console vga=0x0317
PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=104
BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux
PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78
_=/sbin/startproc DAEMON=/usr/sbin/lpd ]
done
<notice>'/etc/init.d/rc5.d/S11lpd start' exits with status 0
<notice>/etc/init.d/rc5.d/S11raw start
<notice>'/etc/init.d/rc5.d/S11raw start' exits with status 0
<notice>/etc/init.d/rc5.d/S11sendmail start
<notice>'/etc/init.d/rc5.d/S11sendmail start' exits with status 0
<notice>/etc/init.d/rc5.d/S11smbfs start
<notice>'/etc/init.d/rc5.d/S11smbfs start' exits with status 0
<notice>/etc/init.d/rc5.d/S11smpppd start
Starting SMPPPD<notice>startproc: execve (/usr/sbin/smpppd) [ /usr/sbin/smpppd ], [
PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=supermarine CONSOLE=/dev/console vga=0x0317
PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=104
BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux
PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78
_=/sbin/startproc DAEMON=/usr/sbin/smpppd ]
done
<notice>'/etc/init.d/rc5.d/S11smpppd start' exits with status 0
<notice>/etc/init.d/rc5.d/S11xntpd start
<notice>'/etc/init.d/rc5.d/S11xntpd start' exits with status 0
<notice>/etc/init.d/rc5.d/S11ypbind start
<notice>'/etc/init.d/rc5.d/S11ypbind start' exits with status 0
<notice>/etc/init.d/rc5.d/S12autofs start
<notice>'/etc/init.d/rc5.d/S12autofs start' exits with status 0
<notice>/etc/init.d/rc5.d/S12cron start
Starting CRON daemon<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [
PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=supermarine CONSOLE=/dev/console vga=0x0317
PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=104
BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux
PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78
_=/sbin/startproc DAEMON=/usr/sbin/cron ]
done
<notice>'/etc/init.d/rc5.d/S12cron start' exits with status 0
<notice>/etc/init.d/rc5.d/S12fam start
<notice>'/etc/init.d/rc5.d/S12fam start' exits with status 0
<notice>/etc/init.d/rc5.d/S12ksysguardd start
<notice>'/etc/init.d/rc5.d/S12ksysguardd start' exits with status 0
<notice>/etc/init.d/rc5.d/S12nfsserver start
Starting kernel based NFS server<notice>checkproc: /sbin/rpc.statd 451
<notice>startproc: execve (/usr/sbin/rpc.mountd) [ /usr/sbin/rpc.mountd ], [ PWD=/
BOOT_FILE=/boot/vmlinuz HOSTNAME=supermarine CONSOLE=/dev/console vga=0x0317
PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=104
BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux
PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78
_=/sbin/startproc DAEMON=/usr/sbin/rpc.mountd ]
done
<notice>'/etc/init.d/rc5.d/S12nfsserver start' exits with status 0
<notice>/etc/init.d/rc5.d/S12nscd start
Starting Name Service Cache Daemon<notice>startproc: execve (/usr/sbin/nscd) [
/usr/sbin/nscd ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=supermarine
CONSOLE=/dev/console vga=0x0317 PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux
LINES=34 SHLVL=2 COLUMNS=104 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386
OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5
INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
done
<notice>'/etc/init.d/rc5.d/S12nscd start' exits with status 0
<notice>/etc/init.d/rc5.d/S12xdm start
Starting service xdm<notice>startproc: execve (/usr/X11R6/bin/xdm) [
/usr/X11R6/bin/xdm ], [ PWD=/ BOOT_FILE=/boot/vmlinuz LC_MESSAGES=
HOSTNAME=supermarine CONSOLE=/dev/console RC_LANG=en_US vga=0x0317 PREVLEVEL=N
SUSE_DOC_HOST=localhost AUTOBOOT=YES QTDIR=/usr/lib/qt2 LC_TIME=
MACHTYPE=i386-suse-linux RC_LC_COLLATE=POSIX LC_ALL= LINES=34 LANG=en_US LC_NUMERIC=
SHLVL=2 COLUMNS=104 LC_CTYPE=en_US BOOT_IMAGE=linux SHELL=/bin/bash PRINTER=lp
HOSTTYPE=i386 OSTYPE=linux WINDOWMANAGER=/usr/X11R6/bin/kde HOME=/ TERM=linux
no_proxy=localhost PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5
FROM_HEADER=supermarine.local LC_MONETARY= INIT_VERSION=sysvinit-2.78 LC_COLLATE=POSIX
_=/sbin/startproc DAEMON=/usr/X11R6/bin/xdm ]
done
<notice>'/etc/init.d/rc5.d/S12xdm start' exits with status 0
<notice>/etc/init.d/rc5.d/S20inetd start
Starting inetd<notice>startproc: execve (/usr/sbin/inetd) [ /usr/sbin/inetd ], [ PWD=/
BOOT_FILE=/boot/vmlinuz HOSTNAME=supermarine CONSOLE=/dev/console vga=0x0317
PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=34 SHLVL=2 COLUMNS=104
BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux
PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78
_=/sbin/startproc DAEMON=/usr/sbin/inetd ]
done
<notice>'/etc/init.d/rc5.d/S20inetd start' exits with status 0
<notice>/etc/init.d/rc5.d/S21SuSEfirewall_final start
<notice>'/etc/init.d/rc5.d/S21SuSEfirewall_final start' exits with status 0
<notice>/etc/init.d/rc5.d/S21alsasound start
Starting sound driver: intel8x0done
Restoring the previous sound settingdone
<notice>'/etc/init.d/rc5.d/S21alsasound start' exits with status 0
<notice>/etc/init.d/rc5.d/S21splash_late start
<notice>'/etc/init.d/rc5.d/S21splash_late start' exits with status 0
<notice>/etc/init.d/rc5.d/S22personal-firewall.final start
Starting personal-firewall (final) [active]done
<notice>'/etc/init.d/rc5.d/S22personal-firewall.final start' exits with status 0
Master Resource Control: runlevel 5 has been reached
Failed services in runlevel 5: nfs
<notice>killproc: kill(136,3)
