On Mon, 2002-04-15 at 12:15, Rodrigo Moya wrote: > Has anybody been able to use the Trust Familyc@m 300 webcam via USB? I > have been trying several things (loading different kernel modules) I've > read in some web sites, but so far with no luck.
I haven't heard about such a camera. Likely, other people know more. > Attached is my /proc/bus/usb/devices and the output of lsusb when the > camera is connected. If you need more info, please tell me. The camera is NOT connected - either the cable is bad, or you are connecting the cable to an unused connector. The output below only shows two OHCI controllers, and no devices attached to either of them. There is no point in trying drivers until the hardware connection is established. You are not there yet. > T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3 > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 0.00 > S: Product=USB OHCI Root Hub > S: SerialNumber=c88a4000 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms > T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3 > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 0.00 > S: Product=USB OHCI Root Hub > S: SerialNumber=c88a2000 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms Dmitri
signature.asc
Description: This is a digitally signed message part
