Hello, I gave some Problem with my usb configuration here.
I loaded usbcore.o and mounted the usbdevfs. I loaded the usb-ohci module and got this in the logs: kernel: usb-ohci.c: USB OHCI at membase 0xe28bc000, IRQ 11 kernel: usb-ohci.c: usb-02:00.0, Advanced Micro Devices [AMD] AMD-768 [??] USB kernel: usb.c: new USB bus registered, assigned bus number 1 kernel: hub.c: USB hub found kernel: hub.c: 4 ports detected and this in /proc/usb/devices: T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 4 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB OHCI Root Hub S: SerialNumber=e28bc000 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms When my printer is connected I also get this in the logs: kernel: hub.c: USB new device connect on bus1/1, assigned device number 2 kernel: usb_control/bulk_msg: timeout kernel: hub.c: USB new device connect on bus1/1, assigned device number 3 kernel: usb_control/bulk_msg: timeout And no extra entries in /proc/usb/devices. I loaded printer.o but it didn't change anything. I tried both ports, two different devices and two cables but nothing helps. Am I overlooking something? What else can I try? Kernel is 2.4.18, 2.5.18 was worse. Its on a Gigabyte SMP mobo with an amd768 [opus] usb on it. Regards Alexander _______________________________________________________________ Don't miss the 2002 Sprint PCS Application Developer's Conference August 25-28 in Las Vegas -- http://devcon.sprintpcs.com/adp/index.cfm _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
