On Sunday 23 June 2002 05:50 pm, Brad Hards wrote: > > There is no standardised serial driver - it is actually an amalgam of > different drivers for different products. You can force the "dumb serial" > driver using module arguments, but I'd suggest holding off on that for a > moment.
OK..... > > Can you provide the contents of /proc/bus/usb/devices? This allows us to > tell a bit more about the device . Sure, here you go: T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB OHCI Root Hub S: SerialNumber=d1ae2000 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB OHCI Root Hub S: SerialNumber=d1ae0000 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 23 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=ff(vend.) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0c88 ProdID=a226 Rev= 1.09 S: Manufacturer=KWC S: Product=KWC USB to Phone Cable S: SerialNumber=00000000 C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 94mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=04 Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl= 1ms ~ Thanks for any help your can give. -Chris ------------------------------------------------------- Sponsored by: ThinkGeek at http://www.ThinkGeek.com/ _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
