Hello,
I tried to get a ScanLogic USB/IDE case to work under Linux (SuSE 8.0,
kernel 2.4.18), but without luck until now.
After connecting it, /proc/bus/usb/devices contains this information
for the device:
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=04ce ProdID=0002 Rev= 2.60
S: Manufacturer=ScanLogic USBIDE
S: Product=ScanLogic USBIDE
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
and /var/log/messages says (output formatted manually):
19:37:27 pharaoh kernel: hub.c: USB new device connect on bus1/1,
assigned device number 3
19:37:27 pharaoh kernel: usb.c: USB device 3 (vend/prod 0x4ce/0x2)
is not claimed by any active driver.
19:37:28 pharaoh kernel: Initializing USB Mass Storage driver...
19:37:28 pharaoh kernel: usb.c: registered new driver usb-storage
19:37:28 pharaoh kernel: scsi0 : SCSI emulation for USB Mass Storage
devices
19:37:46 pharaoh kernel: usb.c: USB disconnect on device 3
19:37:47 pharaoh kernel: hub.c: USB new device connect on bus1/1,
assigned device number 4
19:37:48 pharaoh modprobe: modprobe: Can't locate module block-major-11
19:37:49 pharaoh last message repeated 15 times
19:37:49 pharaoh kernel: resize_dma_pool: unknown device type -1
19:37:51 pharaoh kernel: usb-uhci.c: interrupt, status 3, frame# 292
19:37:51 pharaoh kernel: scsi: device set offline - not ready or
command retry failed after bus reset:
host 0 channel 0 id 0 lun 0
19:37:51 pharaoh insmod: Using /lib/modules/2.4.18-4GB/kernel/drivers-
-/usb/storage/usb-storage.o
19:37:51 pharaoh insmod: Symbol version prefix ''
19:37:51 pharaoh kernel: WARNING: USB Mass Storage data integrity
not assured
19:37:51 pharaoh kernel: USB Mass Storage device found at 3
19:37:51 pharaoh kernel: USB Mass Storage support registered.
19:37:51 pharaoh kernel: usb-uhci.c: ENXIO 80000480, flags 0,
urb c80eade0, burb c80eac60
19:37:51 pharaoh last message repeated 5 times
19:37:51 pharaoh kernel: scsi1 : SCSI emulation for USB Mass
Storage devices
19:37:51 pharaoh /etc/hotplug/usb.agent[24688]: cannot open
/proc/bus/usb/001/003, No such file or directory (2)
19:37:51 pharaoh /etc/hotplug/usb.agent[24720]: Can't ignore signal
CHLD, forcing to default.
19:37:53 pharaoh modprobe: modprobe: Can't locate module block-major-11
19:37:54 pharaoh last message repeated 15 times
19:37:54 pharaoh /etc/hotplug/usb.agent[24688]: Can't ignore signal
CHLD, forcing to default.
The module usb-storage seems to hang after this.
Are there any chances to get this working? Any hints?
Thanks,
John
--
John R. Schrader
Softwareentwicklung fuer industrielle Anwendungen
[EMAIL PROTECTED]
http://www.jrs-software.com
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
