Is the driver for that network card still loaded? On Mon, 8 Jul 2002, Dave Townsend wrote:
> I'm having some problems setting up my cable modem. I plug it in and it gets > detected and CDCEther loaded. The only problem is that CDCEther seems to think > the modem is now device eth0, despite me already having a network car that was > using eth0. A few places say that there is an eth0 and eth1 devices, but I > cant bring eth1 up and I can use dhcpcd on eth0 to get the ip address from my > ISP. Is there any way to solve this, possibly there is something I should be > setting to tell CDCEther to use eth1 as the device or something? > > Dave > > -- > When our backs are against the wall, we shall turn and fight! - John Major > > Mr. Dave Townsend > Research Engineer > Brass Bullet Ltd > Pemchurch Chambers > 30-32 Cradock Street > Swansea > SA1 3EP > Phone: +44(1792) 417227 > Mobile: +44(7909) 962336 > Fax: +44(1792) 533035 > Website: www.brass-bullet.co.uk > > > > ------------------------------------------------------- > This sf.net email is sponsored by:ThinkGeek > Oh, it's good to be a geek. > http://thinkgeek.com/sf > _______________________________________________ > [EMAIL PROTECTED] > To unsubscribe, use the last form field at: > https://lists.sourceforge.net/lists/listinfo/linux-usb-users > -- /------------------------------------+-------------------------\ |Stephen J. Gowdy | SLAC, MailStop 34, | |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA | |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | \------------------------------------+-------------------------/ ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Oh, it's good to be a geek. http://thinkgeek.com/sf _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
