On 23 Jul 2002, David Wolf wrote: | I've been trying for hours to get a USB device recognized. It's a Canon | Multipass F50. Vendor = 0x04a9 Product = 0x2610. I have a driver for | the printer part that should work (Canon S630 Compat), but, I can not | for the life of my access the printer via. /dev/usb/lp0
Have you loaded this Canon printer driver? The USB 'printer' driver won't try to print to this device since it's not a standard USB printer class device. | I get a "No such device" error when I attempt to cat /dev/usb/lp0 Needs a device driver. | /var/log/messages shows this: | | Jul 23 12:06:27 mirkwood kernel: hub.c: USB new device connect on | bus1/2/1, assigned device number 6 | Jul 23 12:06:27 mirkwood kernel: usb.c: USB device 6 (vend/prod | 0x4a9/0x2610) is not claimed by any active driver. | Jul 23 12:06:27 mirkwood /etc/hotplug/usb.agent: ... no modules for USB | product 4a9/2610/506 Still needs a device driver. | usbview reports: | | MultiPASS F50 | Manufacturer: Canon Inc. | Serial Number: 121CQ4DH | Speed: 12Mb/s (full) | USB Version: 1.10 | Device Class: 00(>ifc ) | Device Subclass: 00 | Device Protocol: 00 | Maximum Default Endpoint Size: 64 | Number of Configurations: 1 | Vendor Id: 04a9 | Product Id: 2610 | Revision Number: 5.06 | | Config Number: 1 | Number of Interfaces: 1 | Attributes: c0 | MaxPower Needed: 2mA | | Interface Number: 0 | Name: (none) | Alternate Number: 0 | Class: ff(vend.) | Sub Class: 0 | Protocol: 0 | Number of Endpoints: 3 | | Endpoint Address: 01 | Direction: out | Attribute: 2 | Type: Bulk | Max Packet Size: 64 | Interval: 0ms | | Endpoint Address: 82 | Direction: in | Attribute: 2 | Type: Bulk | Max Packet Size: 64 | Interval: 0ms | | Endpoint Address: 83 | Direction: in | Attribute: 3 | Type: Int. | Max Packet Size: 64 | Interval: 100ms | | Modules loaded (lsmod): | Module Size Used by Not tainted | printer 5632 0 (unused) | lp 6912 0 (autoclean) | joydev 7232 0 (unused) | hid 18816 0 (unused) | usb-uhci 20708 0 (unused) | usbcore 48032 1 [printer hid usb-uhci] | ntfs 48544 0 (unused) | emu10k1 55712 0 | sound 52876 0 [emu10k1] | ac97_codec 9568 0 [emu10k1] | soundcore 3236 7 [emu10k1 sound] | isa-pnp 27432 0 (unused) | parport_pc 25704 1 | parport 21728 1 [lp parport_pc] | 3c59x 24648 1 | ohci1394 14912 0 (unused) | ieee1394 23528 0 [ohci1394] | keybdev 1664 0 (unused) | input 3072 0 [joydev hid keybdev] | | | Can you please help?? Or, point me in the right direction? Load the Canon device driver and try to print... -- ~Randy ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
